From 72ad366f687d45f30a82d8b6e70ce757b21b5aab Mon Sep 17 00:00:00 2001 From: Andreas Noever Date: Tue, 26 Aug 2014 17:42:21 +0200 Subject: [PATCH] thunderbolt: Clear hops before overwriting Zero hops in tb_path_activate before writing a new path. This fixes the following scenario: - Boot with a coldplugged device - Unplug device - Plug device back in - PCI hotplug fails The hotplug operation fails because our new path matches the (now defunct) path which was setup by the firmware for the coldplugged device. By writing zeros before writing our path configuration we can force thunderbolt to retrain the path. Signed-off-by: Andreas Noever Signed-off-by: Greg Kroah-Hartman --- drivers/thunderbolt/path.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/thunderbolt/path.c b/drivers/thunderbolt/path.c index 8fcf8a7b6c22..9562cd026dc0 100644 --- a/drivers/thunderbolt/path.c +++ b/drivers/thunderbolt/path.c @@ -150,7 +150,26 @@ int tb_path_activate(struct tb_path *path) /* Activate hops. */ for (i = path->path_length - 1; i >= 0; i--) { - struct tb_regs_hop hop; + struct tb_regs_hop hop = { 0 }; + + /* + * We do (currently) not tear down paths setup by the firmeware. + * If a firmware device is unplugged and plugged in again then + * it can happen that we reuse some of the hops from the (now + * defunct) firmeware path. This causes the hotplug operation to + * fail (the pci device does not show up). Clearing the hop + * before overwriting it fixes the problem. + * + * Should be removed once we discover and tear down firmeware + * paths. + */ + res = tb_port_write(path->hops[i].in_port, &hop, TB_CFG_HOPS, + 2 * path->hops[i].in_hop_index, 2); + if (res) { + __tb_path_deactivate_hops(path, i); + __tb_path_deallocate_nfc(path, 0); + goto err; + } /* dword 0 */ hop.next_hop = path->hops[i].next_hop_index; -- 2.39.5