From 77136836aef2c7ce9745e765c1e51a14e3933931 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 20 Jul 2012 21:00:00 +0200 Subject: [PATCH] can: Kconfig: convert 'depends on CAN' into 'if CAN...endif' block This patch adds an 'if CAN...endif' Block around all CAN symbols in net/can/Kconfig. So the 'depends on CAN' dependencies can be removed. Signed-off-by: Marc Kleine-Budde --- drivers/net/can/Kconfig | 5 ----- net/can/Kconfig | 7 ++++--- 2 files changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index b56bd9e80957..8088d8fa5611 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -1,9 +1,7 @@ menu "CAN Device Drivers" - depends on CAN config CAN_VCAN tristate "Virtual Local CAN Interface (vcan)" - depends on CAN ---help--- Similar to the network loopback devices, vcan offers a virtual local CAN interface. @@ -13,7 +11,6 @@ config CAN_VCAN config CAN_SLCAN tristate "Serial / USB serial CAN Adaptors (slcan)" - depends on CAN ---help--- CAN driver for several 'low cost' CAN interfaces that are attached via serial lines or via USB-to-serial adapters using the LAWICEL @@ -33,7 +30,6 @@ config CAN_SLCAN config CAN_DEV tristate "Platform CAN drivers with Netlink support" - depends on CAN default y ---help--- Enables the common framework for platform CAN drivers with Netlink @@ -133,7 +129,6 @@ source "drivers/net/can/softing/Kconfig" config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" - depends on CAN ---help--- Say Y here if you want the CAN device drivers to produce a bunch of debug messages to the system log. Select this if you are having diff --git a/net/can/Kconfig b/net/can/Kconfig index 03200699d274..0435fc42ab04 100644 --- a/net/can/Kconfig +++ b/net/can/Kconfig @@ -16,9 +16,10 @@ menuconfig CAN If you want CAN support you should say Y here and also to the specific driver for your controller(s) below. +if CAN + config CAN_RAW tristate "Raw CAN Protocol (raw access with CAN-ID filtering)" - depends on CAN default N ---help--- The raw CAN protocol option offers access to the CAN bus via @@ -29,7 +30,6 @@ config CAN_RAW config CAN_BCM tristate "Broadcast Manager CAN Protocol (with content filtering)" - depends on CAN default N ---help--- The Broadcast Manager offers content filtering, timeout monitoring, @@ -42,7 +42,6 @@ config CAN_BCM config CAN_GW tristate "CAN Gateway/Router (with netlink configuration)" - depends on CAN default N ---help--- The CAN Gateway/Router is used to route (and modify) CAN frames. @@ -53,3 +52,5 @@ config CAN_GW by the netlink configuration interface known e.g. from iptables. source "drivers/net/can/Kconfig" + +endif -- 2.39.5