From 78140156f47ed8a9b07fd6a5766d03d3d837aaca Mon Sep 17 00:00:00 2001 From: Alexandr Ivanov Date: Fri, 22 Apr 2016 13:17:11 +0300 Subject: [PATCH] usb: xhci: remove duplicate code of interval checking Move duplicate code from xhci_queue_intr_tx() and xhci_queue_isoc_tx_prepare() to the check_interval() function. Signed-off-by: Alexandr Ivanov Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 53 ++++++++++++++---------------------- 1 file changed, 21 insertions(+), 32 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index c3ecbd1b37fe..52deae4b7eac 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3005,26 +3005,20 @@ static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id, xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id); } -/* - * xHCI uses normal TRBs for both bulk and interrupt. When the interrupt - * endpoint is to be serviced, the xHC will consume (at most) one TD. A TD - * (comprised of sg list entries) can take several service intervals to - * transmit. - */ -int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, - struct urb *urb, int slot_id, unsigned int ep_index) +static void check_interval(struct xhci_hcd *xhci, struct urb *urb, + struct xhci_ep_ctx *ep_ctx) { - struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, - xhci->devs[slot_id]->out_ctx, ep_index); int xhci_interval; int ep_interval; xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx->ep_info)); ep_interval = urb->interval; + /* Convert to microframes */ if (urb->dev->speed == USB_SPEED_LOW || urb->dev->speed == USB_SPEED_FULL) ep_interval *= 8; + /* FIXME change this to a warning and a suggestion to use the new API * to set the polling interval (once the API is added). */ @@ -3039,6 +3033,22 @@ int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, urb->dev->speed == USB_SPEED_FULL) urb->interval /= 8; } +} + +/* + * xHCI uses normal TRBs for both bulk and interrupt. When the interrupt + * endpoint is to be serviced, the xHC will consume (at most) one TD. A TD + * (comprised of sg list entries) can take several service intervals to + * transmit. + */ +int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, + struct urb *urb, int slot_id, unsigned int ep_index) +{ + struct xhci_ep_ctx *ep_ctx; + + ep_ctx = xhci_get_ep_ctx(xhci, xhci->devs[slot_id]->out_ctx, ep_index); + check_interval(xhci, urb, ep_ctx); + return xhci_queue_bulk_tx(xhci, mem_flags, urb, slot_id, ep_index); } @@ -3720,8 +3730,6 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, struct xhci_ring *ep_ring; struct xhci_ep_ctx *ep_ctx; int start_frame; - int xhci_interval; - int ep_interval; int num_tds, num_trbs, i; int ret; struct xhci_virt_ep *xep; @@ -3749,26 +3757,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, * Check interval value. This should be done before we start to * calculate the start frame value. */ - xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx->ep_info)); - ep_interval = urb->interval; - /* Convert to microframes */ - if (urb->dev->speed == USB_SPEED_LOW || - urb->dev->speed == USB_SPEED_FULL) - ep_interval *= 8; - /* FIXME change this to a warning and a suggestion to use the new API - * to set the polling interval (once the API is added). - */ - if (xhci_interval != ep_interval) { - dev_dbg_ratelimited(&urb->dev->dev, - "Driver uses different interval (%d microframe%s) than xHCI (%d microframe%s)\n", - ep_interval, ep_interval == 1 ? "" : "s", - xhci_interval, xhci_interval == 1 ? "" : "s"); - urb->interval = xhci_interval; - /* Convert back to frames for LS/FS devices */ - if (urb->dev->speed == USB_SPEED_LOW || - urb->dev->speed == USB_SPEED_FULL) - urb->interval /= 8; - } + check_interval(xhci, urb, ep_ctx); /* Calculate the start frame and put it in urb->start_frame. */ if (HCC_CFC(xhci->hcc_params) && !list_empty(&ep_ring->td_list)) { -- 2.39.2