From 7893b2491a2d5f716540ac5643d78d37a7f6628b Mon Sep 17 00:00:00 2001 From: Moni Shoua Date: Sat, 17 May 2008 21:10:12 -0700 Subject: [PATCH] bonding: Send more than one gratuitous ARP when slave takes over With IPoIB, reception of gratuitous ARP by neighboring hosts is essential for a successful change of slaves in case of failure. Otherwise, they won't learn about the HW address change and need to wait a long time until the neighboring system gives up and sends an ARP request to learn the new HW address. This patch decreases the chance for a lost of a gratuitous ARP packet by sending it more than once. The number retries is configurable and can be set with a module param. Signed-off-by: Moni Shoua Acked-by: Jay Vosburgh Signed-off-by: Jeff Garzik --- drivers/net/bonding/bond_main.c | 23 ++++++++++++++---- drivers/net/bonding/bond_sysfs.c | 40 ++++++++++++++++++++++++++++++++ drivers/net/bonding/bonding.h | 1 + 3 files changed, 60 insertions(+), 4 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 2a0039f19377..fa3c2101fe75 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -88,6 +88,7 @@ #define BOND_LINK_ARP_INTERV 0 static int max_bonds = BOND_DEFAULT_MAX_BONDS; +static int num_grat_arp = 1; static int miimon = BOND_LINK_MON_INTERV; static int updelay = 0; static int downdelay = 0; @@ -104,6 +105,8 @@ struct bond_params bonding_defaults; module_param(max_bonds, int, 0); MODULE_PARM_DESC(max_bonds, "Max number of bonded devices"); +module_param(num_grat_arp, int, 0644); +MODULE_PARM_DESC(num_grat_arp, "Number of gratuitous ARP packets to send on failover event"); module_param(miimon, int, 0); MODULE_PARM_DESC(miimon, "Link check interval in milliseconds"); module_param(updelay, int, 0); @@ -1109,14 +1112,18 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active) if (new_active && bond->params.fail_over_mac) memcpy(bond->dev->dev_addr, new_active->dev->dev_addr, new_active->dev->addr_len); + bond->send_grat_arp = bond->params.num_grat_arp; if (bond->curr_active_slave && test_bit(__LINK_STATE_LINKWATCH_PENDING, &bond->curr_active_slave->dev->state)) { dprintk("delaying gratuitous arp on %s\n", bond->curr_active_slave->dev->name); - bond->send_grat_arp = 1; - } else - bond_send_gratuitous_arp(bond); + } else { + if (bond->send_grat_arp > 0) { + bond_send_gratuitous_arp(bond); + bond->send_grat_arp--; + } + } } } @@ -2144,7 +2151,7 @@ static int __bond_mii_monitor(struct bonding *bond, int have_locks) dprintk("sending delayed gratuitous arp on on %s\n", bond->curr_active_slave->dev->name); bond_send_gratuitous_arp(bond); - bond->send_grat_arp = 0; + bond->send_grat_arp--; } } read_lock(&bond->curr_slave_lock); @@ -4626,6 +4633,13 @@ static int bond_check_params(struct bond_params *params) use_carrier = 1; } + if (num_grat_arp < 0 || num_grat_arp > 255) { + printk(KERN_WARNING DRV_NAME + ": Warning: num_grat_arp (%d) not in range 0-255 so it " + "was reset to 1 \n", num_grat_arp); + num_grat_arp = 1; + } + /* reset values for 802.3ad */ if (bond_mode == BOND_MODE_8023AD) { if (!miimon) { @@ -4813,6 +4827,7 @@ static int bond_check_params(struct bond_params *params) params->mode = bond_mode; params->xmit_policy = xmit_hashtype; params->miimon = miimon; + params->num_grat_arp = num_grat_arp; params->arp_interval = arp_interval; params->arp_validate = arp_validate_value; params->updelay = updelay; diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 1f028579e53b..7a61e9a14386 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -950,6 +950,45 @@ out: } static DEVICE_ATTR(lacp_rate, S_IRUGO | S_IWUSR, bonding_show_lacp, bonding_store_lacp); +/* + * Show and set the number of grat ARP to send after a failover event. + */ +static ssize_t bonding_show_n_grat_arp(struct device *d, + struct device_attribute *attr, + char *buf) +{ + struct bonding *bond = to_bond(d); + + return sprintf(buf, "%d\n", bond->params.num_grat_arp); +} + +static ssize_t bonding_store_n_grat_arp(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int new_value, ret = count; + struct bonding *bond = to_bond(d); + + if (sscanf(buf, "%d", &new_value) != 1) { + printk(KERN_ERR DRV_NAME + ": %s: no num_grat_arp value specified.\n", + bond->dev->name); + ret = -EINVAL; + goto out; + } + if (new_value < 0 || new_value > 255) { + printk(KERN_ERR DRV_NAME + ": %s: Invalid num_grat_arp value %d not in range 0-255; rejected.\n", + bond->dev->name, new_value); + ret = -EINVAL; + goto out; + } else { + bond->params.num_grat_arp = new_value; + } +out: + return ret; +} +static DEVICE_ATTR(num_grat_arp, S_IRUGO | S_IWUSR, bonding_show_n_grat_arp, bonding_store_n_grat_arp); /* * Show and set the MII monitor interval. There are two tricky bits * here. First, if MII monitoring is activated, then we must disable @@ -1387,6 +1426,7 @@ static struct attribute *per_bond_attrs[] = { &dev_attr_updelay.attr, &dev_attr_lacp_rate.attr, &dev_attr_xmit_hash_policy.attr, + &dev_attr_num_grat_arp.attr, &dev_attr_miimon.attr, &dev_attr_primary.attr, &dev_attr_use_carrier.attr, diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 0ce7f4ae920f..46a2ed507b33 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -125,6 +125,7 @@ struct bond_params { int mode; int xmit_policy; int miimon; + int num_grat_arp; int arp_interval; int arp_validate; int use_carrier; -- 2.39.5