From 7ac6da2623a4d4b68c61bc289451ac630ae8ec35 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Tue, 12 Jul 2016 15:46:20 +0800 Subject: [PATCH] mmc: sdhci-esdhc-imx: fix strobe DLL lock wrong clock issue When enable DDR, the clock factor definition is changed. e.g. original 200Mhz will become 100Mhz once MIX_CTRL_DDREN bit is set So we need to update the clock setting then the strobe dll can lock the correct clock rate. Additionally we also need disable the clock before locking strobe dll. Acked-by: Adrian Hunter Signed-off-by: Dong Aisheng Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-esdhc-imx.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index ac2c83af7440..bbb0bd4eac28 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -853,6 +853,11 @@ static void esdhc_set_strobe_dll(struct sdhci_host *host) u32 v; if (host->mmc->actual_clock > ESDHC_STROBE_DLL_CLK_FREQ) { + /* disable clock before enabling strobe dll */ + writel(readl(host->ioaddr + ESDHC_VENDOR_SPEC) & + ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON, + host->ioaddr + ESDHC_VENDOR_SPEC); + /* force a reset on strobe dll */ writel(ESDHC_STROBE_DLL_CTRL_RESET, host->ioaddr + ESDHC_STROBE_DLL_CTRL); @@ -914,6 +919,8 @@ static void esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned timing) m |= ESDHC_MIX_CTRL_DDREN | ESDHC_MIX_CTRL_HS400_EN; writel(m, host->ioaddr + ESDHC_MIX_CTRL); imx_data->is_ddr = 1; + /* update clock after enable DDR for strobe DLL lock */ + host->ops->set_clock(host, host->clock); esdhc_set_strobe_dll(host); break; } -- 2.39.5