From 7b40982e235d6ff9343d38703eb48a0143afcc26 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 20 Dec 2008 10:58:33 +0100 Subject: [PATCH] rt2x00: Move code into seperate functions Some functions have grown rapidly in size over the last time, some of those functions (like the rt2x00queue_create_tx_descriptor) will further increase in size soon, so it is best to start cutting it into logical pieces. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00crypto.c | 13 +- drivers/net/wireless/rt2x00/rt2x00lib.h | 6 +- drivers/net/wireless/rt2x00/rt2x00mac.c | 40 +++-- drivers/net/wireless/rt2x00/rt2x00queue.c | 193 +++++++++++---------- 4 files changed, 138 insertions(+), 114 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c index aee9cba13eb3..e9d3ddae2785 100644 --- a/drivers/net/wireless/rt2x00/rt2x00crypto.c +++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c @@ -49,9 +49,14 @@ enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key) void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry, struct txentry_desc *txdesc) { + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); struct ieee80211_key_conf *hw_key = tx_info->control.hw_key; + if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) || + !hw_key || entry->skb->do_not_encrypt) + return; + __set_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags); txdesc->cipher = rt2x00crypto_key_to_cipher(hw_key); @@ -69,11 +74,17 @@ void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry, __set_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags); } -unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info) +unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev, + struct sk_buff *skb) { + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ieee80211_key_conf *key = tx_info->control.hw_key; unsigned int overhead = 0; + if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) || + !key || skb->do_not_encrypt) + return overhead; + /* * Extend frame length to include IV/EIV/ICV/MMIC, * note that these lengths should only be added when diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index fccaffde6f55..5e8df250e50d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -282,7 +282,8 @@ static inline void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key); void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry, struct txentry_desc *txdesc); -unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info); +unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev, + struct sk_buff *skb); void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, unsigned int iv_len); void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len); void rt2x00crypto_tx_insert_iv(struct sk_buff *skb); @@ -300,7 +301,8 @@ static inline void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry, { } -static inline unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info) +static inline unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev, + struct sk_buff *skb) { return 0; } diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index e6fba830d1d3..bf7755a21645 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -79,8 +79,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, * RTS/CTS frame should use the length of the frame plus any * encryption overhead that will be added by the hardware. */ - if (!frag_skb->do_not_encrypt) - data_length += rt2x00crypto_tx_overhead(tx_info); + data_length += rt2x00crypto_tx_overhead(rt2x00dev, skb); if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif, @@ -484,6 +483,24 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw, EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter); #ifdef CONFIG_RT2X00_LIB_CRYPTO +static void memcpy_tkip(struct rt2x00lib_crypto *crypto, u8 *key, u8 key_len) +{ + if (key_len > NL80211_TKIP_DATA_OFFSET_ENCR_KEY) + memcpy(&crypto->key, + &key[NL80211_TKIP_DATA_OFFSET_ENCR_KEY], + sizeof(crypto->key)); + + if (key_len > NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY) + memcpy(&crypto->tx_mic, + &key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY], + sizeof(crypto->tx_mic)); + + if (key_len > NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY) + memcpy(&crypto->rx_mic, + &key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY], + sizeof(crypto->rx_mic)); +} + int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, const u8 *local_address, const u8 *address, struct ieee80211_key_conf *key) @@ -521,22 +538,9 @@ int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, crypto.cmd = cmd; crypto.address = address; - if (crypto.cipher == CIPHER_TKIP) { - if (key->keylen > NL80211_TKIP_DATA_OFFSET_ENCR_KEY) - memcpy(&crypto.key, - &key->key[NL80211_TKIP_DATA_OFFSET_ENCR_KEY], - sizeof(crypto.key)); - - if (key->keylen > NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY) - memcpy(&crypto.tx_mic, - &key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY], - sizeof(crypto.tx_mic)); - - if (key->keylen > NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY) - memcpy(&crypto.rx_mic, - &key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY], - sizeof(crypto.rx_mic)); - } else + if (crypto.cipher == CIPHER_TKIP) + memcpy_tkip(&crypto, &key->key[0], key->keylen); + else memcpy(&crypto.key, &key->key[0], key->keylen); /* diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 01125563aba3..f4a951338f8f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -148,20 +148,105 @@ void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) dev_kfree_skb_any(skb); } +static void rt2x00queue_create_tx_descriptor_seq(struct queue_entry *entry, + struct txentry_desc *txdesc) +{ + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data; + struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif); + unsigned long irqflags; + + if (!(tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) || + unlikely(!tx_info->control.vif)) + return; + + /* + * Hardware should insert sequence counter. + * FIXME: We insert a software sequence counter first for + * hardware that doesn't support hardware sequence counting. + * + * This is wrong because beacons are not getting sequence + * numbers assigned properly. + * + * A secondary problem exists for drivers that cannot toggle + * sequence counting per-frame, since those will override the + * sequence counter given by mac80211. + */ + spin_lock_irqsave(&intf->seqlock, irqflags); + + if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)) + intf->seqno += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(intf->seqno); + + spin_unlock_irqrestore(&intf->seqlock, irqflags); + + __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags); +} + +static void rt2x00queue_create_tx_descriptor_plcp(struct queue_entry *entry, + struct txentry_desc *txdesc, + const struct rt2x00_rate *hwrate) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0]; + unsigned int data_length; + unsigned int duration; + unsigned int residual; + + /* Data length + CRC + Crypto overhead (IV/EIV/ICV/MIC) */ + data_length = entry->skb->len + 4; + data_length += rt2x00crypto_tx_overhead(rt2x00dev, entry->skb); + + /* + * PLCP setup + * Length calculation depends on OFDM/CCK rate. + */ + txdesc->signal = hwrate->plcp; + txdesc->service = 0x04; + + if (hwrate->flags & DEV_RATE_OFDM) { + txdesc->length_high = (data_length >> 6) & 0x3f; + txdesc->length_low = data_length & 0x3f; + } else { + /* + * Convert length to microseconds. + */ + residual = GET_DURATION_RES(data_length, hwrate->bitrate); + duration = GET_DURATION(data_length, hwrate->bitrate); + + if (residual != 0) { + duration++; + + /* + * Check if we need to set the Length Extension + */ + if (hwrate->bitrate == 110 && residual <= 30) + txdesc->service |= 0x80; + } + + txdesc->length_high = (duration >> 8) & 0xff; + txdesc->length_low = duration & 0xff; + + /* + * When preamble is enabled we should set the + * preamble bit for the signal. + */ + if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) + txdesc->signal |= 0x08; + } +} + static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, struct txentry_desc *txdesc) { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data; - struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0]; struct ieee80211_rate *rate = ieee80211_get_tx_rate(rt2x00dev->hw, tx_info); const struct rt2x00_rate *hwrate; - unsigned int data_length; - unsigned int duration; - unsigned int residual; - unsigned long irqflags; memset(txdesc, 0, sizeof(*txdesc)); @@ -173,27 +258,12 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, txdesc->cw_max = entry->queue->cw_max; txdesc->aifs = entry->queue->aifs; - /* Data length + CRC */ - data_length = entry->skb->len + 4; - /* * Check whether this frame is to be acked. */ if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) __set_bit(ENTRY_TXD_ACK, &txdesc->flags); - if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) && - !entry->skb->do_not_encrypt) { - /* Apply crypto specific descriptor information */ - rt2x00crypto_create_tx_descriptor(entry, txdesc); - - /* - * Extend frame length to include all encryption overhead - * that will be added by the hardware. - */ - data_length += rt2x00crypto_tx_overhead(tx_info); - } - /* * Check if this is a RTS/CTS frame */ @@ -237,86 +307,23 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, * Set ifs to IFS_SIFS when the this is not the first fragment, * or this fragment came after RTS/CTS. */ - if (test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags)) { - txdesc->ifs = IFS_SIFS; - } else if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) { + if ((tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) && + !test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags)) { __set_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags); txdesc->ifs = IFS_BACKOFF; - } else { + } else txdesc->ifs = IFS_SIFS; - } - /* - * Hardware should insert sequence counter. - * FIXME: We insert a software sequence counter first for - * hardware that doesn't support hardware sequence counting. - * - * This is wrong because beacons are not getting sequence - * numbers assigned properly. - * - * A secondary problem exists for drivers that cannot toggle - * sequence counting per-frame, since those will override the - * sequence counter given by mac80211. - */ - if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { - if (likely(tx_info->control.vif)) { - struct rt2x00_intf *intf; - - intf = vif_to_intf(tx_info->control.vif); - - spin_lock_irqsave(&intf->seqlock, irqflags); - - if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)) - intf->seqno += 0x10; - hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); - hdr->seq_ctrl |= cpu_to_le16(intf->seqno); - - spin_unlock_irqrestore(&intf->seqlock, irqflags); - - __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags); - } - } - - /* - * PLCP setup - * Length calculation depends on OFDM/CCK rate. - */ hwrate = rt2x00_get_rate(rate->hw_value); - txdesc->signal = hwrate->plcp; - txdesc->service = 0x04; - - if (hwrate->flags & DEV_RATE_OFDM) { + if (hwrate->flags & DEV_RATE_OFDM) __set_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags); - txdesc->length_high = (data_length >> 6) & 0x3f; - txdesc->length_low = data_length & 0x3f; - } else { - /* - * Convert length to microseconds. - */ - residual = GET_DURATION_RES(data_length, hwrate->bitrate); - duration = GET_DURATION(data_length, hwrate->bitrate); - - if (residual != 0) { - duration++; - - /* - * Check if we need to set the Length Extension - */ - if (hwrate->bitrate == 110 && residual <= 30) - txdesc->service |= 0x80; - } - - txdesc->length_high = (duration >> 8) & 0xff; - txdesc->length_low = duration & 0xff; - - /* - * When preamble is enabled we should set the - * preamble bit for the signal. - */ - if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) - txdesc->signal |= 0x08; - } + /* + * Apply TX descriptor handling by components + */ + rt2x00crypto_create_tx_descriptor(entry, txdesc); + rt2x00queue_create_tx_descriptor_seq(entry, txdesc); + rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate); } static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry, -- 2.39.5