From 7c1b0ec52969e6e2fb5676dfc74eb2770bc4c7b2 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 19 Aug 2013 04:33:22 +0900 Subject: [PATCH] ARM: dts: Enable USB hub on Arndale The Arndale has a SMSC USB3503 connected in hardware only mode like a PHY, support it using the usb-nop-xceiv binding. Note that due to a regrettable decision to use a regulator to represent the reset signal this uses a fixed voltage regulator to do that, there is a plan to use the reset controller binding once that is merged so it does not seem worthwhile to fix the usb-nop-xceiv driver at this point. Signed-off-by: Mark Brown Tested-by: Tushar Behera Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-arndale.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index ca430206c3e8..3e4589bd4515 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -541,4 +541,18 @@ rtc { status = "okay"; }; + + usb_hub_bus { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + // SMSC USB3503 connected in hardware only mode as a PHY + usb_hub: usb_hub { + compatible = "smsc,usb3503a"; + + reset-gpios = <&gpx3 5 1>; + connect-gpios = <&gpd1 7 1>; + }; + }; }; -- 2.39.2