From 7d2dbcf9faad074c52a941d01fc21eea3c95ca33 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 21 Nov 2008 10:36:06 +0000 Subject: [PATCH] [ARM] S3C: Fix scaler1 clock rate information The pwm-scaler0 and pwm-scaler1 clocks have their .id field set to -1 as they are not referenced to any specific device. However, parts of the pwm-clock code used the .id field to identify which scaler clock was being used. Fix the problem by comparing against the pointer to the clock to identify the scalers. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/pwm-clock.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-s3c/pwm-clock.c b/arch/arm/plat-s3c/pwm-clock.c index b0fcbc1fb64b..e07d82891a92 100644 --- a/arch/arm/plat-s3c/pwm-clock.c +++ b/arch/arm/plat-s3c/pwm-clock.c @@ -73,11 +73,13 @@ * tclk -------------------------/ */ +static struct clk clk_timer_scaler[]; + static unsigned long clk_pwm_scaler_get_rate(struct clk *clk) { unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0); - if (clk->id == 1) { + if (clk == &clk_timer_scaler[1]) { tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK; tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT; } else { @@ -114,7 +116,7 @@ static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate) local_irq_save(flags); tcfg0 = __raw_readl(S3C2410_TCFG0); - if (clk->id == 1) { + if (clk == &clk_timer_scaler[1]) { tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK; tcfg0 |= divisor << S3C2410_TCFG_PRESCALER1_SHIFT; } else { -- 2.39.5