From 7e4cda70c0be3c82c0248aee5c4c255e46469fd7 Mon Sep 17 00:00:00 2001 From: Kedareswara rao Appana Date: Thu, 7 Apr 2016 10:59:42 +0530 Subject: [PATCH] Documentation: DT: vdma: update binding doc for AXI DMA This patch updates the device-tree binding doc for adding support for AXI DMA. Also this patch differentiates required properties b/w DMA and VDMA. Signed-off-by: Kedareswara rao Appana Signed-off-by: Vinod Koul --- .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt index a86737c99f53..3fb23fe8e503 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt @@ -3,20 +3,28 @@ It can be configured to have one channel or two channels. If configured as two channels, one is to transmit to the video device and another is to receive from the video device. +Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream +target devices. It can be configured to have one channel or two channels. +If configured as two channels, one is to transmit to the device and another +is to receive from the device. + Required properties: -- compatible: Should be "xlnx,axi-vdma-1.00.a" +- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a" - #dma-cells: Should be <1>, see "dmas" property below - reg: Should contain VDMA registers location and length. -- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w. - xlnx,addrwidth: Should be the vdma addressing size in bits(ex: 32 bits). - dma-ranges: Should be as the following . - dma-channel child node: Should have at least one channel and can have up to two channels per device. This node specifies the properties of each DMA channel (see child node properties below). +Required properties for VDMA: +- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w. + Optional properties: - xlnx,include-sg: Tells configured for Scatter-mode in the hardware. +Optional properties for VDMA: - xlnx,flush-fsync: Tells which channel to Flush on Frame sync. It takes following values: {1}, flush both channels @@ -33,6 +41,7 @@ Required child node properties: Optional child node properties: - xlnx,include-dre: Tells hardware is configured for Data Realignment Engine. +Optional child node properties for VDMA: - xlnx,genlock-mode: Tells Genlock synchronization is enabled/disabled in hardware. -- 2.39.2