From 7e7743901b53dd71bb7332b16b14bcce15ebcd69 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Wed, 2 Jul 2014 22:50:36 -0700 Subject: [PATCH] leds:pca963x: Update for PCA9635 and correct statement about MODE2 OUTDRV default mention support for 16 LED PCA9635 chip the default of MODE2's OUTDRV was incorrectly stated Signed-off-by: Peter Meerwald Signed-off-by: Bryan Wu --- Documentation/devicetree/bindings/leds/pca963x.txt | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/leds/pca963x.txt b/Documentation/devicetree/bindings/leds/pca963x.txt index aece3eac1b63..dafbe9931c2b 100644 --- a/Documentation/devicetree/bindings/leds/pca963x.txt +++ b/Documentation/devicetree/bindings/leds/pca963x.txt @@ -1,18 +1,19 @@ LEDs connected to pca9632, pca9633 or pca9634 Required properties: -- compatible : should be : "nxp,pca9632", "nxp,pca9633" or "nxp,pca9634" +- compatible : should be : "nxp,pca9632", "nxp,pca9633", "nxp,pca9634" or "nxp,pca9635" Optional properties: -- nxp,totem-pole : use totem pole (push-pull) instead of default open-drain +- nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults + to open-drain, newer chips to totem pole) - nxp,hw-blink : use hardware blinking instead of software blinking Each led is represented as a sub-node of the nxp,pca963x device. LED sub-node properties: - label : (optional) see Documentation/devicetree/bindings/leds/common.txt -- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633 - or 0 to 7 in pca9634) +- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633, + 0 to 7 in pca9634, or 0 to 15 in pca9635) - linux,default-trigger : (optional) see Documentation/devicetree/bindings/leds/common.txt -- 2.39.5