From 7eb64c0f25574abeb02b79088258f94ba9339075 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Sun, 18 Mar 2012 23:00:44 +0100 Subject: [PATCH] powerpc/mpc52xx: add a4m072 board support Add DTS file for a4m072 board and add its name to the list of the supported boards. Signed-off-by: Heiko Schocher cc: Grant Likely cc: devicetree-discuss@ozlabs.org cc: Wolfgang Denk cc: Wolfram Sang Signed-off-by: Anatolij Gustschin --- arch/powerpc/boot/dts/a4m072.dts | 168 +++++++++++++++++++ arch/powerpc/platforms/52xx/mpc5200_simple.c | 1 + 2 files changed, 169 insertions(+) create mode 100644 arch/powerpc/boot/dts/a4m072.dts diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts new file mode 100644 index 000000000000..fabe7b7d5f13 --- /dev/null +++ b/arch/powerpc/boot/dts/a4m072.dts @@ -0,0 +1,168 @@ +/* + * a4m072 board Device Tree Source + * + * Copyright (C) 2011 DENX Software Engineering GmbH + * Heiko Schocher + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc5200b.dtsi" + +/ { + model = "anonymous,a4m072"; + compatible = "anonymous,a4m072"; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; /* From boot loader */ + system-frequency = <0>; /* From boot loader */ + + cdm@200 { + fsl,init-ext-48mhz-en = <0x0>; + fsl,init-fd-enable = <0x01>; + fsl,init-fd-counters = <0x3333>; + }; + + timer@600 { + fsl,has-wdt; + }; + + gpt3: timer@630 { /* General Purpose Timer in GPIO mode */ + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt4: timer@640 { /* General Purpose Timer in GPIO mode */ + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt5: timer@650 { /* General Purpose Timer in GPIO mode */ + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + spi@f00 { + status = "disabled"; + }; + + psc@2000 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + psc@2200 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2200 0x100>; + interrupts = <2 2 0>; + }; + + psc@2400 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + psc@2600 { + status = "disabled"; + }; + + psc@2800 { + status = "disabled"; + }; + + psc@2c00 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2c00 0x100>; + interrupts = <2 4 0>; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@1f { + reg = <0x1f>; + interrupts = <1 2 0>; /* IRQ 2 active low */ + }; + }; + + i2c@3d00 { + status = "disabled"; + }; + + i2c@3d40 { + hwmon@2e { + compatible = "nsc,lm87"; + reg = <0x2e>; + }; + rtc@51 { + compatible = "nxp,rtc8564"; + reg = <0x51>; + }; + }; + }; + + localbus { + compatible = "fsl,mpc5200b-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xfe000000 0x02000000 + 1 0 0x62000000 0x00400000 + 2 0 0x64000000 0x00200000 + 3 0 0x66000000 0x01000000 + 6 0 0x68000000 0x01000000 + 7 0 0x6a000000 0x00000004>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + sram0@1,0 { + compatible = "mtd-ram"; + reg = <1 0x00000 0x00400000>; + bank-width = <2>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x16 */ + 0xc000 0 0 1 &mpc5200_pic 1 3 3 + 0xc000 0 0 2 &mpc5200_pic 1 3 3 + 0xc000 0 0 3 &mpc5200_pic 1 3 3 + 0xc000 0 0 4 &mpc5200_pic 1 3 3>; + clock-frequency = <0>; /* From boot loader */ + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c index 846b789fb195..c0aa04068d69 100644 --- a/arch/powerpc/platforms/52xx/mpc5200_simple.c +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c @@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void) /* list of the supported boards */ static const char *board[] __initdata = { + "anonymous,a4m072", "anon,charon", "intercontrol,digsy-mtc", "manroland,mucmc52", -- 2.39.5