From 8363c374145b69bb177ed7e658a2b22f9c64910f Mon Sep 17 00:00:00 2001 From: Kevin Liu Date: Sat, 17 Nov 2012 17:55:51 -0500 Subject: [PATCH] mmc: sdhci: Balance vmmc regulator_enable(), and always enable vqmmc The vmmc regulator enable in sdhci_add_host is NOT necessary since it can be enabled during mmc_power_up by function mmc_regulator_set_ocr. And this extra enable will make regulator_enable/regulator_disable unbalanced. Consequently, vmmc can't be disabled during mmc_power_off. Also, if the vqmmc regulator exists, it should be enabled regardless it support 1.8v or not. Signed-off-by: Kevin Liu Signed-off-by: Philip Rakity Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index c7851c0aabce..2f62fe4309f2 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2858,12 +2858,14 @@ int sdhci_add_host(struct sdhci_host *host) mmc_hostname(mmc)); host->vqmmc = NULL; } - } - else if (regulator_is_supported_voltage(host->vqmmc, 1800000, 1800000)) + } else { regulator_enable(host->vqmmc); - else - caps[1] &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | - SDHCI_SUPPORT_DDR50); + if (!regulator_is_supported_voltage(host->vqmmc, 1800000, + 1800000)) + caps[1] &= ~(SDHCI_SUPPORT_SDR104 | + SDHCI_SUPPORT_SDR50 | + SDHCI_SUPPORT_DDR50); + } /* Any UHS-I mode in caps implies SDR12 and SDR25 support. */ if (caps[1] & (SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | @@ -2919,8 +2921,7 @@ int sdhci_add_host(struct sdhci_host *host) mmc_hostname(mmc)); host->vmmc = NULL; } - } else - regulator_enable(host->vmmc); + } #ifdef CONFIG_REGULATOR if (host->vmmc) { -- 2.39.5