From 8a2c9c44cee967f8af05e4b8da35675d4ab9ac6b Mon Sep 17 00:00:00 2001 From: Mark Hounschell Date: Wed, 5 Mar 2014 15:54:50 -0500 Subject: [PATCH] staging: dgap: fix a few more 80+ lines as reported by checkpatch This patch fixes a few 80+ char lines as reported by checkpatch Signed-off-by: Mark Hounschell Signed-off-by: Greg Kroah-Hartman --- drivers/staging/dgap/dgap.c | 100 ++++++++++++++++++++++++------------ 1 file changed, 67 insertions(+), 33 deletions(-) diff --git a/drivers/staging/dgap/dgap.c b/drivers/staging/dgap/dgap.c index b259bd5afef2..28a8362f5271 100644 --- a/drivers/staging/dgap/dgap.c +++ b/drivers/staging/dgap/dgap.c @@ -2699,7 +2699,7 @@ static int dgap_maxcps_room(struct tty_struct *tty, int bytes_available) if (ch->ch_cpstime < current_time) { /* buffer is empty */ - ch->ch_cpstime = current_time; /* reset ch_cpstime */ + ch->ch_cpstime = current_time; /* reset ch_cpstime */ cps_limit = ch->ch_digi.digi_bufsize; } else if (ch->ch_cpstime < buffer_time) { /* still room in the buffer */ @@ -2837,7 +2837,8 @@ static int dgap_tty_put_char(struct tty_struct *tty, unsigned char c) * Take data from the user or kernel and send it out to the FEP. * In here exists all the Transparent Print magic as well. */ -static int dgap_tty_write(struct tty_struct *tty, const unsigned char *buf, int count) +static int dgap_tty_write(struct tty_struct *tty, const unsigned char *buf, + int count) { struct channel_t *ch = NULL; struct un_t *un = NULL; @@ -2929,7 +2930,8 @@ static int dgap_tty_write(struct tty_struct *tty, const unsigned char *buf, int } /* - * If there is nothing left to copy, or I can't handle any more data, leave. + * If there is nothing left to copy, or + * I can't handle any more data, leave. */ if (count <= 0) { dgap_set_firmware_event(un, UN_LOW | UN_EMPTY); @@ -2952,7 +2954,8 @@ static int dgap_tty_write(struct tty_struct *tty, const unsigned char *buf, int if (down_interruptible(&dgap_TmpWriteSem)) return -EINTR; - if (copy_from_user(dgap_TmpWriteBuf, (const uchar __user *) buf, count)) { + if (copy_from_user(dgap_TmpWriteBuf, (const uchar __user *)buf, + count)) { up(&dgap_TmpWriteSem); return -EFAULT; } @@ -2976,7 +2979,8 @@ static int dgap_tty_write(struct tty_struct *tty, const unsigned char *buf, int vaddr = ch->ch_taddr + head; memcpy_toio(vaddr, (uchar *) buf, remain); - dgap_sniff_nowait_nolock(ch, "USER WRITE", (uchar *) buf, remain); + dgap_sniff_nowait_nolock(ch, "USER WRITE", (uchar *) buf, + remain); head = ch->ch_tstart; buf += remain; @@ -2991,7 +2995,8 @@ static int dgap_tty_write(struct tty_struct *tty, const unsigned char *buf, int remain = n; memcpy_toio(vaddr, (uchar *) buf, remain); - dgap_sniff_nowait_nolock(ch, "USER WRITE", (uchar *) buf, remain); + dgap_sniff_nowait_nolock(ch, "USER WRITE", (uchar *)buf, + remain); head += remain; @@ -3315,7 +3320,8 @@ static int dgap_get_modem_info(struct channel_t *ch, unsigned int __user *value) * * Set modem signals, called by ld. */ -static int dgap_set_modem_info(struct tty_struct *tty, unsigned int command, unsigned int __user *value) +static int dgap_set_modem_info(struct tty_struct *tty, unsigned int command, + unsigned int __user *value) { struct board_t *bd; struct channel_t *ch; @@ -3409,7 +3415,8 @@ static int dgap_set_modem_info(struct tty_struct *tty, unsigned int command, uns * * */ -static int dgap_tty_digigeta(struct tty_struct *tty, struct digi_t __user *retinfo) +static int dgap_tty_digigeta(struct tty_struct *tty, + struct digi_t __user *retinfo) { struct channel_t *ch; struct un_t *un; @@ -3450,7 +3457,8 @@ static int dgap_tty_digigeta(struct tty_struct *tty, struct digi_t __user *retin * * */ -static int dgap_tty_digiseta(struct tty_struct *tty, struct digi_t __user *new_info) +static int dgap_tty_digiseta(struct tty_struct *tty, + struct digi_t __user *new_info) { struct board_t *bd; struct channel_t *ch; @@ -3603,7 +3611,8 @@ static int dgap_tty_digisetedelay(struct tty_struct *tty, int __user *new_info) * * Ioctl to get the current custom baud rate setting. */ -static int dgap_tty_digigetcustombaud(struct tty_struct *tty, int __user *retinfo) +static int dgap_tty_digigetcustombaud(struct tty_struct *tty, + int __user *retinfo) { struct channel_t *ch; struct un_t *un; @@ -3641,7 +3650,8 @@ static int dgap_tty_digigetcustombaud(struct tty_struct *tty, int __user *retinf * * Ioctl to set the custom baud rate setting */ -static int dgap_tty_digisetcustombaud(struct tty_struct *tty, int __user *new_info) +static int dgap_tty_digisetcustombaud(struct tty_struct *tty, + int __user *new_info) { struct board_t *bd; struct channel_t *ch; @@ -3688,7 +3698,8 @@ static int dgap_tty_digisetcustombaud(struct tty_struct *tty, int __user *new_in /* * dgap_set_termios() */ -static void dgap_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +static void dgap_tty_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) { struct board_t *bd; struct channel_t *ch; @@ -4115,7 +4126,8 @@ static int dgap_tty_ioctl(struct tty_struct *tty, unsigned int cmd, DGAP_UNLOCK(ch->ch_lock, lock_flags2); DGAP_UNLOCK(bd->bd_lock, lock_flags); - rc = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *) arg); + rc = put_user(C_CLOCAL(tty) ? 1 : 0, + (unsigned long __user *) arg); return rc; case TIOCSSOFTCAR: @@ -4128,7 +4140,8 @@ static int dgap_tty_ioctl(struct tty_struct *tty, unsigned int cmd, DGAP_LOCK(bd->bd_lock, lock_flags); DGAP_LOCK(ch->ch_lock, lock_flags2); - tty->termios.c_cflag = ((tty->termios.c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0)); + tty->termios.c_cflag = ((tty->termios.c_cflag & ~CLOCAL) | + (arg ? CLOCAL : 0)); dgap_param(tty); DGAP_UNLOCK(ch->ch_lock, lock_flags2); DGAP_UNLOCK(bd->bd_lock, lock_flags); @@ -4723,15 +4736,20 @@ static void dgap_get_vpd(struct board_t *brd) /* * Lots of magic numbers here. * - * The VPD offset is located inside the ROM Data Structure. + * The VPD offset is located inside the ROM Data + * Structure. + * * We also have to remember the length of each * ROM Data Structure, so we can "hop" to the next * entry if the VPD isn't in the current * ROM Data Structure. */ - rom_offset = readw(brd->re_map_membase + base_offset + 0x18); - image_length = readw(brd->re_map_membase + rom_offset + 0x10) * 512; - vpd_offset = readw(brd->re_map_membase + rom_offset + 0x08); + rom_offset = readw(brd->re_map_membase + + base_offset + 0x18); + image_length = readw(brd->re_map_membase + + rom_offset + 0x10) * 512; + vpd_offset = readw(brd->re_map_membase + + rom_offset + 0x08); /* Found the VPD entry */ if (vpd_offset) @@ -4758,8 +4776,10 @@ static void dgap_get_vpd(struct board_t *brd) */ if (vpd_offset) { brd->bd_flags |= BD_HAS_VPD; - for (i = 0; i < VPDSIZE; i++) - brd->vpd[i] = readb(brd->re_map_membase + vpd_offset + i); + for (i = 0; i < VPDSIZE; i++) { + brd->vpd[i] = readb(brd->re_map_membase + + vpd_offset + i); + } } } @@ -4857,7 +4877,8 @@ out: /* * Match this board to a config the user created for us. */ - bd->bd_config = dgap_find_config(bd->type, bd->pci_bus, bd->pci_slot); + bd->bd_config = dgap_find_config(bd->type, bd->pci_bus, + bd->pci_slot); /* * Because the 4 port Xr products share the same PCI ID @@ -4866,7 +4887,8 @@ out: * PAPORT4 attempt as well. */ if (bd->type == PAPORT8 && !bd->bd_config) - bd->bd_config = dgap_find_config(PAPORT4, bd->pci_bus, bd->pci_slot); + bd->bd_config = dgap_find_config(PAPORT4, bd->pci_bus, + bd->pci_slot); /* * Register the ttys (if any) into the kernel. @@ -4999,7 +5021,8 @@ out: * in the cmd buffer before returning. * *=======================================================================*/ -static void dgap_cmdb(struct channel_t *ch, uchar cmd, uchar byte1, uchar byte2, uint ncmds) +static void dgap_cmdb(struct channel_t *ch, uchar cmd, uchar byte1, + uchar byte2, uint ncmds) { char *vaddr = NULL; struct cm_t *cm_addr = NULL; @@ -5443,7 +5466,8 @@ static int dgap_param(struct tty_struct *tty) * Now go get from fep mem, what the fep * believes the custom baud rate is. */ - ch->ch_baud_info = ch->ch_custom_speed = dgap_get_custom_baud(ch); + ch->ch_custom_speed = dgap_get_custom_baud(ch); + ch->ch_baud_info = ch->ch_custom_speed; /* Handle transition from B0 */ if (ch->ch_flags & CH_BAUD0) { @@ -5485,8 +5509,12 @@ static int dgap_param(struct tty_struct *tty) 4800, 9600, 19200, 38400 } }; - /* Only use the TXPrint baud rate if the terminal unit is NOT open */ - if (!(ch->ch_tun.un_flags & UN_ISOPEN) && (un->un_type == DGAP_PRINT)) + /* + * Only use the TXPrint baud rate if the + * terminal unit is NOT open + */ + if (!(ch->ch_tun.un_flags & UN_ISOPEN) && + (un->un_type == DGAP_PRINT)) baud = C_BAUD(ch->ch_pun.un_tty) & 0xff; else baud = C_BAUD(ch->ch_tun.un_tty) & 0xff; @@ -5511,18 +5539,21 @@ static int dgap_param(struct tty_struct *tty) ch->ch_baud_info = baud; /* - * CBAUD has bit position 0x1000 set these days to indicate Linux - * baud rate remap. - * We use a different bit assignment for high speed. Clear this - * bit out while grabbing the parts of "cflag" we want. + * CBAUD has bit position 0x1000 set these days to + * indicate Linux baud rate remap. + * We use a different bit assignment for high speed. + * Clear this bit out while grabbing the parts of + * "cflag" we want. */ - cflag = ch->ch_c_cflag & ((CBAUD ^ CBAUDEX) | PARODD | PARENB | CSTOPB | CSIZE); + cflag = ch->ch_c_cflag & ((CBAUD ^ CBAUDEX) | PARODD | PARENB | + CSTOPB | CSIZE); /* * HUPCL bit is used by FEP to indicate fast baud * table is to be used. */ - if ((ch->ch_digi.digi_flags & DIGI_FAST) || (ch->ch_c_cflag & CBAUDEX)) + if ((ch->ch_digi.digi_flags & DIGI_FAST) || + (ch->ch_c_cflag & CBAUDEX)) cflag |= HUPCL; if ((ch->ch_c_cflag & CBAUDEX) && @@ -5537,7 +5568,10 @@ static int dgap_param(struct tty_struct *tty) tcflag_t tcflag = (ch->ch_c_cflag & CBAUD) | CBAUDEX; int baudpart = 0; - /* Map high speed requests to index into FEP's baud table */ + /* + * Map high speed requests to index + * into FEP's baud table + */ switch (tcflag) { case B57600: baudpart = 1; -- 2.39.5