From 8b7be72b1fe93fe78f325312a9ece12b9531efeb Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 23 May 2017 12:32:44 -0300 Subject: [PATCH] ARM: dts: tx6: Remove 'enable-active-low' property MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Property 'enable-active-low' does not exist. Only 'enable-active-high' is valid, and when this property is absent the gpio regulator will act as active low by default. So remove the unexisting 'enable-active-low' property. Currently the GPIO flag is GPIO_ACTIVE_HIGH. In order to make the dts description accurate, pass the GPIO_ACTIVE_LOW flag instead. This change is safe because the gpio regulator driver does not take the GPIO flag polarity into account. Signed-off-by: Fabio Estevam Acked-by: Lothar Waßmann Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 3 +-- arch/arm/boot/dts/imx6ul-tx6ul.dtsi | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index 1691714f13a2..a146fe7fdc5a 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -133,8 +133,7 @@ regulator-max-microvolt = <3300000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan_xcvr>; - gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; - enable-active-low; + gpio = <&gpio4 21 GPIO_ACTIVE_LOW>; }; reg_lcd0_pwr: regulator-lcd0-pwr { diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index c784a0b75ca0..4ccc9e9d2c29 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -173,8 +173,7 @@ regulator-max-microvolt = <3300000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan_xcvr>; - gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; - enable-active-low; + gpio = <&gpio3 5 GPIO_ACTIVE_LOW>; }; reg_lcd_pwr: regulator-lcdpwr { -- 2.39.2