From 8b98126d2ce701c7367deee60739904e17864523 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 1 Aug 2013 09:41:20 +0200 Subject: [PATCH] ARM: shmobile: ape6evm: update MMC0, SDHI0 and SDHI1 with correct regulators Currently a dummy fixed always-on regulator is used for all 3 SD/MMC interfaces on ape6evm. This patch updates the board to use correct supplies for MMC0, SDHI0 and SDHI1 VDD. SDHI0 VccQ supply regulator should be implemented in a separate patch. Signed-off-by: Guennadi Liakhovetski Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-ape6evm.c | 54 ++++++++++++++++++++++---- 1 file changed, 46 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c index 24b87eea9da3..02be420ebd1e 100644 --- a/arch/arm/mach-shmobile/board-ape6evm.c +++ b/arch/arm/mach-shmobile/board-ape6evm.c @@ -113,16 +113,49 @@ static const struct smsc911x_platform_config lan9220_data __initconst = { }; /* - * On APE6EVM power is supplied to MMCIF by a tps80032 regulator. For now we - * model a VDD supply to MMCIF, using a fixed 3.3V regulator. Also use the - * static power supply for SDHI0 and SDHI1, whereas SDHI0's VccQ is also - * supplied by the same tps80032 regulator and thus can also be adjusted - * dynamically. + * MMC0 power supplies: + * Both Vcc and VccQ to eMMC on APE6EVM are supplied by a tps80032 voltage + * regulator. Until support for it is added to this file we simulate the + * Vcc supply by a fixed always-on regulator */ -static struct regulator_consumer_supply fixed3v3_power_consumers[] = +static struct regulator_consumer_supply vcc_mmc0_consumers[] = { REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), +}; + +/* + * SDHI0 power supplies: + * Vcc to SDHI0 on APE6EVM is supplied by a GPIO-switchable regulator. VccQ is + * provided by the same tps80032 regulator as both MMC0 voltages - see comment + * above + */ +static struct regulator_consumer_supply vcc_sdhi0_consumers[] = +{ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data vcc_sdhi0_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi0_consumers), + .consumer_supplies = vcc_sdhi0_consumers, +}; + +static const struct fixed_voltage_config vcc_sdhi0_info __initconst = { + .supply_name = "SDHI0 Vcc", + .microvolts = 3300000, + .gpio = 76, + .enable_high = 1, + .init_data = &vcc_sdhi0_init_data, +}; + +/* + * SDHI1 power supplies: + * Vcc and VccQ to SDHI1 on APE6EVM are both fixed at 3.3V + */ +static struct regulator_consumer_supply vcc_sdhi1_consumers[] = +{ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), }; @@ -215,14 +248,19 @@ static void __init ape6evm_add_standard_devices(void) platform_device_register_resndata(&platform_bus, "smsc911x", -1, lan9220_res, ARRAY_SIZE(lan9220_res), &lan9220_data, sizeof(lan9220_data)); - regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers, - ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + + regulator_register_always_on(1, "MMC0 Vcc", vcc_mmc0_consumers, + ARRAY_SIZE(vcc_mmc0_consumers), 2800000); platform_device_register_resndata(&platform_bus, "sh_mmcif", 0, mmcif0_resources, ARRAY_SIZE(mmcif0_resources), &mmcif0_pdata, sizeof(mmcif0_pdata)); + platform_device_register_data(&platform_bus, "reg-fixed-voltage", 2, + &vcc_sdhi0_info, sizeof(vcc_sdhi0_info)); platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0, sdhi0_resources, ARRAY_SIZE(sdhi0_resources), &sdhi0_pdata, sizeof(sdhi0_pdata)); + regulator_register_always_on(3, "SDHI1 Vcc", vcc_sdhi1_consumers, + ARRAY_SIZE(vcc_sdhi1_consumers), 3300000); platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 1, sdhi1_resources, ARRAY_SIZE(sdhi1_resources), &sdhi1_pdata, sizeof(sdhi1_pdata)); -- 2.39.5