From 8ccfd3f074f75135971905d2413811729e19580e Mon Sep 17 00:00:00 2001 From: Vipin Bhandari Date: Wed, 10 Mar 2010 14:03:01 +0530 Subject: [PATCH] davinci: da830/omap-l137 evm: add support for GPIO based MMC/SD card detection The DA830/OMAP-L137 EVM has GPIO based card detection logic, but the current code does not use it. Add support for GPIO based card detection to avoid reading the card to see if a card is present or not. Signed-off-by: Vipin Bhandari Signed-off-by: Sekhar Nori Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-da830-evm.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index dc19870b23c..8e670372d7f 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -229,14 +229,21 @@ static const short da830_evm_mmc_sd_pins[] = { }; #define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1) +#define DA830_MMCSD_CD_PIN GPIO_TO_PIN(2, 2) static int da830_evm_mmc_get_ro(int index) { return gpio_get_value(DA830_MMCSD_WP_PIN); } +static int da830_evm_mmc_get_cd(int index) +{ + return !gpio_get_value(DA830_MMCSD_CD_PIN); +} + static struct davinci_mmc_config da830_evm_mmc_config = { .get_ro = da830_evm_mmc_get_ro, + .get_cd = da830_evm_mmc_get_cd, .wires = 4, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, @@ -262,6 +269,14 @@ static inline void da830_evm_init_mmc(void) } gpio_direction_input(DA830_MMCSD_WP_PIN); + ret = gpio_request(DA830_MMCSD_CD_PIN, "MMC CD\n"); + if (ret) { + pr_warning("da830_evm_init: can not open GPIO %d\n", + DA830_MMCSD_CD_PIN); + return; + } + gpio_direction_input(DA830_MMCSD_CD_PIN); + ret = da8xx_register_mmcsd0(&da830_evm_mmc_config); if (ret) { pr_warning("da830_evm_init: mmc/sd registration failed: %d\n", -- 2.39.5