From 8d46283a97108ba43bf3d150d2fa757920d0f531 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sat, 12 May 2012 11:33:11 -0700 Subject: [PATCH] hwmon: (ina2xx) Add support for INA220 and INA230 INA220 is register compatible to INA219, and INA230 is register compatible to INA226, so all we need to do is to add name aliases for those two chips. Cc: Lothar Felten Signed-off-by: Guenter Roeck Reviewed-by: Jean Delvare --- Documentation/hwmon/ina2xx | 18 ++++++++++++++++++ drivers/hwmon/Kconfig | 6 +++--- drivers/hwmon/ina2xx.c | 10 ++++++++++ 3 files changed, 31 insertions(+), 3 deletions(-) diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx index f50a6cc27616..03444f9d833f 100644 --- a/Documentation/hwmon/ina2xx +++ b/Documentation/hwmon/ina2xx @@ -8,12 +8,24 @@ Supported chips: Datasheet: Publicly available at the Texas Instruments website http://www.ti.com/ + * Texas Instruments INA220 + Prefix: 'ina220' + Addresses: I2C 0x40 - 0x4f + Datasheet: Publicly available at the Texas Instruments website + http://www.ti.com/ + * Texas Instruments INA226 Prefix: 'ina226' Addresses: I2C 0x40 - 0x4f Datasheet: Publicly available at the Texas Instruments website http://www.ti.com/ + * Texas Instruments INA230 + Prefix: 'ina230' + Addresses: I2C 0x40 - 0x4f + Datasheet: Publicly available at the Texas Instruments website + http://www.ti.com/ + Author: Lothar Felten Description @@ -23,7 +35,13 @@ The INA219 is a high-side current shunt and power monitor with an I2C interface. The INA219 monitors both shunt drop and supply voltage, with programmable conversion times and filtering. +The INA220 is a high or low side current shunt and power monitor with an I2C +interface. The INA220 monitors both shunt drop and supply voltage. + The INA226 is a current shunt and power monitor with an I2C interface. The INA226 monitors both a shunt voltage drop and bus supply voltage. +The INA230 is a high or low side current shunt and power monitor with an I2C +interface. The INA230 monitors both a shunt voltage drop and bus supply voltage. + The shunt value in micro-ohms can be set via platform data. diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 41e311386e89..86adde90c1bb 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1145,11 +1145,11 @@ config SENSORS_AMC6821 will be called amc6821. config SENSORS_INA2XX - tristate "Texas Instruments INA219, INA226" + tristate "Texas Instruments INA219 and compatibles" depends on I2C && EXPERIMENTAL help - If you say yes here you get support for INA219 and INA226 power - monitor chips. + If you say yes here you get support for INA219, INA220, INA226, and + INA230 power monitor chips. The INA2xx driver is configured for the default configuration of the part as described in the datasheet. diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c index de8f2c6c6b66..70717d4a5e89 100644 --- a/drivers/hwmon/ina2xx.c +++ b/drivers/hwmon/ina2xx.c @@ -5,10 +5,18 @@ * Zero Drift Bi-Directional Current/Power Monitor with I2C Interface * Datasheet: http://www.ti.com/product/ina219 * + * INA220: + * Bi-Directional Current/Power Monitor with I2C Interface + * Datasheet: http://www.ti.com/product/ina220 + * * INA226: * Bi-Directional Current/Power Monitor with I2C Interface * Datasheet: http://www.ti.com/product/ina226 * + * INA230: + * Bi-directional Current/Power Monitor with I2C Interface + * Datasheet: http://www.ti.com/product/ina230 + * * Copyright (C) 2012 Lothar Felten * Thanks to Jan Volkering * @@ -277,7 +285,9 @@ static int ina2xx_remove(struct i2c_client *client) static const struct i2c_device_id ina2xx_id[] = { { "ina219", ina219 }, + { "ina220", ina219 }, { "ina226", ina226 }, + { "ina230", ina226 }, { } }; MODULE_DEVICE_TABLE(i2c, ina2xx_id); -- 2.39.5