From 8dce1d4ccf7eada1b94bb69fabd388b965638db3 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Tue, 27 Mar 2012 15:40:20 -0400 Subject: [PATCH] arch/tile: use interrupt critical sections less In general we want to avoid ever touching memory while within an interrupt critical section, since the page fault path goes through a different path from the hypervisor when in an interrupt critical section, and we carefully decided with tilegx that we didn't need to support this path in the kernel. (On tilepro we did implement that path as part of supporting atomic instructions in software.) In practice we always need to touch the kernel stack, since that's where we store the interrupt state before releasing the critical section, but this change cleans up a few things. The IRQ_ENABLE macro is split up so that when we want to enable interrupts in a deferred way (e.g. for cpu_idle or for interrupt return) we can read the per-cpu enable mask before entering the critical section. The cache-migration code is changed to use interrupt masking instead of interrupt critical sections. And, the interrupt-entry code is changed so that we defer loading "tp" from per-cpu data until after we have released the interrupt critical section. Signed-off-by: Chris Metcalf --- arch/tile/include/asm/irqflags.h | 34 ++++++++++---- arch/tile/kernel/entry.S | 3 +- arch/tile/kernel/intvec_64.S | 78 ++++++++++++++++++-------------- arch/tile/mm/init.c | 4 ++ arch/tile/mm/migrate.h | 6 +++ arch/tile/mm/migrate_32.S | 36 ++++----------- arch/tile/mm/migrate_64.S | 34 +++----------- 7 files changed, 96 insertions(+), 99 deletions(-) diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h index 5db0ce54284d..b4e96fef2cf8 100644 --- a/arch/tile/include/asm/irqflags.h +++ b/arch/tile/include/asm/irqflags.h @@ -28,10 +28,10 @@ */ #if CHIP_HAS_AUX_PERF_COUNTERS() #define LINUX_MASKABLE_INTERRUPTS_HI \ - (~(INT_MASK_HI(INT_PERF_COUNT) | INT_MASK_HI(INT_AUX_PERF_COUNT))) + (~(INT_MASK_HI(INT_PERF_COUNT) | INT_MASK_HI(INT_AUX_PERF_COUNT))) #else #define LINUX_MASKABLE_INTERRUPTS_HI \ - (~(INT_MASK_HI(INT_PERF_COUNT))) + (~(INT_MASK_HI(INT_PERF_COUNT))) #endif #else @@ -90,6 +90,14 @@ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_0, (unsigned long)(__m)); \ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_1, (unsigned long)(__m>>32)); \ } while (0) +#define interrupt_mask_save_mask() \ + (__insn_mfspr(SPR_INTERRUPT_MASK_SET_K_0) | \ + (((unsigned long long)__insn_mfspr(SPR_INTERRUPT_MASK_SET_K_1))<<32)) +#define interrupt_mask_restore_mask(mask) do { \ + unsigned long long __m = (mask); \ + __insn_mtspr(SPR_INTERRUPT_MASK_K_0, (unsigned long)(__m)); \ + __insn_mtspr(SPR_INTERRUPT_MASK_K_1, (unsigned long)(__m>>32)); \ +} while (0) #else #define interrupt_mask_set(n) \ __insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (1UL << (n))) @@ -101,6 +109,10 @@ __insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (mask)) #define interrupt_mask_reset_mask(mask) \ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K, (mask)) +#define interrupt_mask_save_mask() \ + __insn_mfspr(SPR_INTERRUPT_MASK_K) +#define interrupt_mask_restore_mask(mask) \ + __insn_mtspr(SPR_INTERRUPT_MASK_K, (mask)) #endif /* @@ -122,7 +134,7 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask); /* Disable all interrupts, including NMIs. */ #define arch_local_irq_disable_all() \ - interrupt_mask_set_mask(-1UL) + interrupt_mask_set_mask(-1ULL) /* Re-enable all maskable interrupts. */ #define arch_local_irq_enable() \ @@ -179,7 +191,7 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask); #ifdef __tilegx__ #if INT_MEM_ERROR != 0 -# error Fix IRQ_DISABLED() macro +# error Fix IRQS_DISABLED() macro #endif /* Return 0 or 1 to indicate whether interrupts are currently disabled. */ @@ -207,9 +219,10 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask); mtspr SPR_INTERRUPT_MASK_SET_K, tmp /* Enable interrupts. */ -#define IRQ_ENABLE(tmp0, tmp1) \ +#define IRQ_ENABLE_LOAD(tmp0, tmp1) \ GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0); \ - ld tmp0, tmp0; \ + ld tmp0, tmp0 +#define IRQ_ENABLE_APPLY(tmp0, tmp1) \ mtspr SPR_INTERRUPT_MASK_RESET_K, tmp0 #else /* !__tilegx__ */ @@ -253,17 +266,22 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask); mtspr SPR_INTERRUPT_MASK_SET_K_1, tmp /* Enable interrupts. */ -#define IRQ_ENABLE(tmp0, tmp1) \ +#define IRQ_ENABLE_LOAD(tmp0, tmp1) \ GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0); \ { \ lw tmp0, tmp0; \ addi tmp1, tmp0, 4 \ }; \ - lw tmp1, tmp1; \ + lw tmp1, tmp1 +#define IRQ_ENABLE_APPLY(tmp0, tmp1) \ mtspr SPR_INTERRUPT_MASK_RESET_K_0, tmp0; \ mtspr SPR_INTERRUPT_MASK_RESET_K_1, tmp1 #endif +#define IRQ_ENABLE(tmp0, tmp1) \ + IRQ_ENABLE_LOAD(tmp0, tmp1); \ + IRQ_ENABLE_APPLY(tmp0, tmp1) + /* * Do the CPU's IRQ-state tracing from assembly code. We call a * C function, but almost everywhere we do, we don't mind clobbering diff --git a/arch/tile/kernel/entry.S b/arch/tile/kernel/entry.S index ec91568df880..133c4b56a99e 100644 --- a/arch/tile/kernel/entry.S +++ b/arch/tile/kernel/entry.S @@ -100,8 +100,9 @@ STD_ENTRY(smp_nap) */ STD_ENTRY(_cpu_idle) movei r1, 1 + IRQ_ENABLE_LOAD(r2, r3) mtspr INTERRUPT_CRITICAL_SECTION, r1 - IRQ_ENABLE(r2, r3) /* unmask, but still with ICS set */ + IRQ_ENABLE_APPLY(r2, r3) /* unmask, but still with ICS set */ mtspr INTERRUPT_CRITICAL_SECTION, zero .global _cpu_idle_nap _cpu_idle_nap: diff --git a/arch/tile/kernel/intvec_64.S b/arch/tile/kernel/intvec_64.S index 49d9d6621682..4ef4c0a721d3 100644 --- a/arch/tile/kernel/intvec_64.S +++ b/arch/tile/kernel/intvec_64.S @@ -220,7 +220,9 @@ intvec_\vecname: * This routine saves just the first four registers, plus the * stack context so we can do proper backtracing right away, * and defers to handle_interrupt to save the rest. - * The backtracer needs pc, ex1, lr, sp, r52, and faultnum. + * The backtracer needs pc, ex1, lr, sp, r52, and faultnum, + * and needs sp set to its final location at the bottom of + * the stack frame. */ addli r0, r0, PTREGS_OFFSET_LR - (PTREGS_SIZE + KSTK_PTREGS_GAP) wh64 r0 /* cache line 7 */ @@ -450,23 +452,6 @@ intvec_\vecname: push_reg r5, r52 st r52, r4 - /* Load tp with our per-cpu offset. */ -#ifdef CONFIG_SMP - { - mfspr r20, SPR_SYSTEM_SAVE_K_0 - moveli r21, hw2_last(__per_cpu_offset) - } - { - shl16insli r21, r21, hw1(__per_cpu_offset) - bfextu r20, r20, 0, LOG2_THREAD_SIZE-1 - } - shl16insli r21, r21, hw0(__per_cpu_offset) - shl3add r20, r20, r21 - ld tp, r20 -#else - move tp, zero -#endif - /* * If we will be returning to the kernel, we will need to * reset the interrupt masks to the state they had before. @@ -489,6 +474,44 @@ intvec_\vecname: .endif st r21, r32 + /* + * we've captured enough state to the stack (including in + * particular our EX_CONTEXT state) that we can now release + * the interrupt critical section and replace it with our + * standard "interrupts disabled" mask value. This allows + * synchronous interrupts (and profile interrupts) to punch + * through from this point onwards. + * + * It's important that no code before this point touch memory + * other than our own stack (to keep the invariant that this + * is all that gets touched under ICS), and that no code after + * this point reference any interrupt-specific SPR, in particular + * the EX_CONTEXT_K_ values. + */ + .ifc \function,handle_nmi + IRQ_DISABLE_ALL(r20) + .else + IRQ_DISABLE(r20, r21) + .endif + mtspr INTERRUPT_CRITICAL_SECTION, zero + + /* Load tp with our per-cpu offset. */ +#ifdef CONFIG_SMP + { + mfspr r20, SPR_SYSTEM_SAVE_K_0 + moveli r21, hw2_last(__per_cpu_offset) + } + { + shl16insli r21, r21, hw1(__per_cpu_offset) + bfextu r20, r20, 0, LOG2_THREAD_SIZE-1 + } + shl16insli r21, r21, hw0(__per_cpu_offset) + shl3add r20, r20, r21 + ld tp, r20 +#else + move tp, zero +#endif + #ifdef __COLLECT_LINKER_FEEDBACK__ /* * Notify the feedback routines that we were in the @@ -512,21 +535,6 @@ intvec_\vecname: FEEDBACK_ENTER(\function) #endif - /* - * we've captured enough state to the stack (including in - * particular our EX_CONTEXT state) that we can now release - * the interrupt critical section and replace it with our - * standard "interrupts disabled" mask value. This allows - * synchronous interrupts (and profile interrupts) to punch - * through from this point onwards. - */ - .ifc \function,handle_nmi - IRQ_DISABLE_ALL(r20) - .else - IRQ_DISABLE(r20, r21) - .endif - mtspr INTERRUPT_CRITICAL_SECTION, zero - /* * Prepare the first 256 stack bytes to be rapidly accessible * without having to fetch the background data. @@ -723,9 +731,10 @@ STD_ENTRY(interrupt_return) beqzt r30, .Lrestore_regs j 3f 2: TRACE_IRQS_ON + IRQ_ENABLE_LOAD(r20, r21) movei r0, 1 mtspr INTERRUPT_CRITICAL_SECTION, r0 - IRQ_ENABLE(r20, r21) + IRQ_ENABLE_APPLY(r20, r21) beqzt r30, .Lrestore_regs 3: @@ -742,7 +751,6 @@ STD_ENTRY(interrupt_return) * that will save some cycles if this turns out to be a syscall. */ .Lrestore_regs: - FEEDBACK_REENTER(interrupt_return) /* called from elsewhere */ /* * Rotate so we have one high bit and one low bit to test. diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c index 6a9d20ddc34f..1e4633520b35 100644 --- a/arch/tile/mm/init.c +++ b/arch/tile/mm/init.c @@ -444,6 +444,7 @@ static pgd_t pgtables[PTRS_PER_PGD] */ static void __init kernel_physical_mapping_init(pgd_t *pgd_base) { + unsigned long long irqmask; unsigned long address, pfn; pmd_t *pmd; pte_t *pte; @@ -633,10 +634,13 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base) * - install pgtables[] as the real page table * - flush the TLB so the new page table takes effect */ + irqmask = interrupt_mask_save_mask(); + interrupt_mask_set_mask(-1ULL); rc = flush_and_install_context(__pa(pgtables), init_pgprot((unsigned long)pgtables), __get_cpu_var(current_asid), cpumask_bits(my_cpu_mask)); + interrupt_mask_restore_mask(irqmask); BUG_ON(rc != 0); /* Copy the page table back to the normal swapper_pg_dir. */ diff --git a/arch/tile/mm/migrate.h b/arch/tile/mm/migrate.h index cd45a0837fa6..91683d97917e 100644 --- a/arch/tile/mm/migrate.h +++ b/arch/tile/mm/migrate.h @@ -24,6 +24,9 @@ /* * This function is used as a helper when setting up the initial * page table (swapper_pg_dir). + * + * You must mask ALL interrupts prior to invoking this code, since + * you can't legally touch the stack during the cache flush. */ extern int flush_and_install_context(HV_PhysAddr page_table, HV_PTE access, HV_ASID asid, @@ -39,6 +42,9 @@ extern int flush_and_install_context(HV_PhysAddr page_table, HV_PTE access, * * Note that any non-NULL pointers must not point to the page that * is handled by the stack_pte itself. + * + * You must mask ALL interrupts prior to invoking this code, since + * you can't legally touch the stack during the cache flush. */ extern int homecache_migrate_stack_and_flush(pte_t stack_pte, unsigned long va, size_t length, pte_t *stack_ptep, diff --git a/arch/tile/mm/migrate_32.S b/arch/tile/mm/migrate_32.S index ac01a7cdf77f..5305814bf187 100644 --- a/arch/tile/mm/migrate_32.S +++ b/arch/tile/mm/migrate_32.S @@ -40,8 +40,7 @@ #define FRAME_R32 16 #define FRAME_R33 20 #define FRAME_R34 24 -#define FRAME_R35 28 -#define FRAME_SIZE 32 +#define FRAME_SIZE 28 @@ -66,12 +65,11 @@ #define r_my_cpumask r5 /* Locals (callee-save); must not be more than FRAME_xxx above. */ -#define r_save_ics r30 -#define r_context_lo r31 -#define r_context_hi r32 -#define r_access_lo r33 -#define r_access_hi r34 -#define r_asid r35 +#define r_context_lo r30 +#define r_context_hi r31 +#define r_access_lo r32 +#define r_access_hi r33 +#define r_asid r34 STD_ENTRY(flush_and_install_context) /* @@ -104,11 +102,7 @@ STD_ENTRY(flush_and_install_context) sw r_tmp, r33 addi r_tmp, sp, FRAME_R34 } - { - sw r_tmp, r34 - addi r_tmp, sp, FRAME_R35 - } - sw r_tmp, r35 + sw r_tmp, r34 /* Move some arguments to callee-save registers. */ { @@ -121,13 +115,6 @@ STD_ENTRY(flush_and_install_context) } move r_asid, r_asid_in - /* Disable interrupts, since we can't use our stack. */ - { - mfspr r_save_ics, INTERRUPT_CRITICAL_SECTION - movei r_tmp, 1 - } - mtspr INTERRUPT_CRITICAL_SECTION, r_tmp - /* First, flush our L2 cache. */ { move r0, zero /* cache_pa */ @@ -163,7 +150,7 @@ STD_ENTRY(flush_and_install_context) } { move r4, r_asid - movei r5, HV_CTX_DIRECTIO + moveli r5, HV_CTX_DIRECTIO | CTX_PAGE_FLAG } jal hv_install_context bnz r0, .Ldone @@ -175,9 +162,6 @@ STD_ENTRY(flush_and_install_context) } .Ldone: - /* Reset interrupts back how they were before. */ - mtspr INTERRUPT_CRITICAL_SECTION, r_save_ics - /* Restore the callee-saved registers and return. */ addli lr, sp, FRAME_SIZE { @@ -202,10 +186,6 @@ STD_ENTRY(flush_and_install_context) } { lw r34, r_tmp - addli r_tmp, sp, FRAME_R35 - } - { - lw r35, r_tmp addi sp, sp, FRAME_SIZE } jrp lr diff --git a/arch/tile/mm/migrate_64.S b/arch/tile/mm/migrate_64.S index e76fea688beb..1d15b10833d1 100644 --- a/arch/tile/mm/migrate_64.S +++ b/arch/tile/mm/migrate_64.S @@ -38,8 +38,7 @@ #define FRAME_R30 16 #define FRAME_R31 24 #define FRAME_R32 32 -#define FRAME_R33 40 -#define FRAME_SIZE 48 +#define FRAME_SIZE 40 @@ -60,10 +59,9 @@ #define r_my_cpumask r3 /* Locals (callee-save); must not be more than FRAME_xxx above. */ -#define r_save_ics r30 -#define r_context r31 -#define r_access r32 -#define r_asid r33 +#define r_context r30 +#define r_access r31 +#define r_asid r32 /* * Caller-save locals and frame constants are the same as @@ -93,11 +91,7 @@ STD_ENTRY(flush_and_install_context) st r_tmp, r31 addi r_tmp, sp, FRAME_R32 } - { - st r_tmp, r32 - addi r_tmp, sp, FRAME_R33 - } - st r_tmp, r33 + st r_tmp, r32 /* Move some arguments to callee-save registers. */ { @@ -106,13 +100,6 @@ STD_ENTRY(flush_and_install_context) } move r_asid, r_asid_in - /* Disable interrupts, since we can't use our stack. */ - { - mfspr r_save_ics, INTERRUPT_CRITICAL_SECTION - movei r_tmp, 1 - } - mtspr INTERRUPT_CRITICAL_SECTION, r_tmp - /* First, flush our L2 cache. */ { move r0, zero /* cache_pa */ @@ -147,7 +134,7 @@ STD_ENTRY(flush_and_install_context) } { move r2, r_asid - movei r3, HV_CTX_DIRECTIO + moveli r3, HV_CTX_DIRECTIO | CTX_PAGE_FLAG } jal hv_install_context bnez r0, 1f @@ -158,10 +145,7 @@ STD_ENTRY(flush_and_install_context) jal hv_flush_all } -1: /* Reset interrupts back how they were before. */ - mtspr INTERRUPT_CRITICAL_SECTION, r_save_ics - - /* Restore the callee-saved registers and return. */ +1: /* Restore the callee-saved registers and return. */ addli lr, sp, FRAME_SIZE { ld lr, lr @@ -177,10 +161,6 @@ STD_ENTRY(flush_and_install_context) } { ld r32, r_tmp - addli r_tmp, sp, FRAME_R33 - } - { - ld r33, r_tmp addi sp, sp, FRAME_SIZE } jrp lr -- 2.39.5