From 8dedc88776319f06cca3f25e7ec543244015a800 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:18 +0530 Subject: [PATCH] tty: serial: mfd: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mfd.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index 4a82267af83f..d3db042f649e 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -386,7 +386,7 @@ static void serial_hsu_stop_tx(struct uart_port *port) /* This is always called in spinlock protected mode, so * modify timeout timer is safe here */ -void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts) +void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts, unsigned long *flags) { struct hsu_dma_buffer *dbuf = &up->rxbuf; struct hsu_dma_chan *chan = up->rxc; @@ -438,7 +438,9 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts) | (0x1 << 16) | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ ); + spin_unlock_irqrestore(&up->port.lock, *flags); tty_flip_buffer_push(tport); + spin_lock_irqsave(&up->port.lock, *flags); chan_writel(chan, HSU_CH_CR, 0x3); @@ -459,7 +461,8 @@ static void serial_hsu_stop_rx(struct uart_port *port) } } -static inline void receive_chars(struct uart_hsu_port *up, int *status) +static inline void receive_chars(struct uart_hsu_port *up, int *status, + unsigned long *flags) { unsigned int ch, flag; unsigned int max_count = 256; @@ -519,7 +522,10 @@ static inline void receive_chars(struct uart_hsu_port *up, int *status) ignore_char: *status = serial_in(up, UART_LSR); } while ((*status & UART_LSR_DR) && max_count--); + + spin_unlock_irqrestore(&up->port.lock, *flags); tty_flip_buffer_push(&up->port.state->port); + spin_lock_irqsave(&up->port.lock, *flags); } static void transmit_chars(struct uart_hsu_port *up) @@ -613,7 +619,7 @@ static irqreturn_t port_irq(int irq, void *dev_id) lsr = serial_in(up, UART_LSR); if (lsr & UART_LSR_DR) - receive_chars(up, &lsr); + receive_chars(up, &lsr, &flags); check_modem_status(up); /* lsr will be renewed during the receive_chars */ @@ -643,7 +649,7 @@ static inline void dma_chan_irq(struct hsu_dma_chan *chan) /* Rx channel */ if (chan->dirt == DMA_FROM_DEVICE) - hsu_dma_rx(up, int_sts); + hsu_dma_rx(up, int_sts, &flags); /* Tx channel */ if (chan->dirt == DMA_TO_DEVICE) { -- 2.39.5