From 8f7fa3c8014cc6a892e5bd0e31dc772989935ec3 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 25 Jun 2012 11:06:54 -0300 Subject: [PATCH] Revert "[media] radio-aimslab: Use LM7000 driver" This reverts commit bece083a6b2b242c7ab74117640396e1bd851e49. As requested by Hans Verkuil: > You accidentally merged the wrong first version of the lm7000 patch series. > > These are the correct second version patches: > > http://patchwork.linuxtv.org/patch/11689/ > http://patchwork.linuxtv.org/patch/11690/ > http://patchwork.linuxtv.org/patch/11691/ > > The second version is much simpler and doesn't require the creation of a whole > new driver. Requested-by: Hans Verkuil Cc: Ondrej Zary Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/Kconfig | 3 -- drivers/media/radio/radio-aimslab.c | 78 +++++++++++++++++------------ 2 files changed, 45 insertions(+), 36 deletions(-) diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index abdf43c05720..5bcce129d718 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -193,14 +193,11 @@ config RADIO_CADET config RADIO_LM7000 tristate - depends on RADIO_RTRACK - default RADIO_RTRACK config RADIO_RTRACK tristate "AIMSlab RadioTrack (aka RadioReveal) support" depends on ISA && VIDEO_V4L2 select RADIO_ISA - select RADIO_LM7000 ---help--- Choose Y here if you have one of these FM radio cards, and then fill in the port address below. diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c index 48b72d89dffe..98e0c8c20312 100644 --- a/drivers/media/radio/radio-aimslab.c +++ b/drivers/media/radio/radio-aimslab.c @@ -37,7 +37,6 @@ #include #include #include "radio-isa.h" -#include "lm7000.h" MODULE_AUTHOR("M. Kirkwood"); MODULE_DESCRIPTION("A driver for the RadioTrack/RadioReveal radio card."); @@ -62,53 +61,66 @@ MODULE_PARM_DESC(radio_nr, "Radio device numbers"); struct rtrack { struct radio_isa_card isa; int curvol; - struct lm7000 lm; }; -#define AIMS_BIT_TUN_CE (1 << 0) -#define AIMS_BIT_TUN_CLK (1 << 1) -#define AIMS_BIT_TUN_DATA (1 << 2) -#define AIMS_BIT_VOL_CE (1 << 3) -#define AIMS_BIT_TUN_STRQ (1 << 4) -/* bit 5 is not connected */ -#define AIMS_BIT_VOL_UP (1 << 6) /* active low */ -#define AIMS_BIT_VOL_DN (1 << 7) /* active low */ - -void rtrack_set_pins(struct lm7000 *lm, u8 pins) +static struct radio_isa_card *rtrack_alloc(void) { - struct rtrack *rt = container_of(lm, struct rtrack, lm); - u8 bits = AIMS_BIT_VOL_DN | AIMS_BIT_VOL_UP | AIMS_BIT_TUN_STRQ; + struct rtrack *rt = kzalloc(sizeof(struct rtrack), GFP_KERNEL); - if (!v4l2_ctrl_g_ctrl(rt->isa.mute)) - bits |= AIMS_BIT_VOL_CE; + if (rt) + rt->curvol = 0xff; + return rt ? &rt->isa : NULL; +} - if (pins & LM7000_DATA) - bits |= AIMS_BIT_TUN_DATA; - if (pins & LM7000_CLK) - bits |= AIMS_BIT_TUN_CLK; - if (pins & LM7000_CE) - bits |= AIMS_BIT_TUN_CE; +/* The 128+64 on these outb's is to keep the volume stable while tuning. + * Without them, the volume _will_ creep up with each frequency change + * and bit 4 (+16) is to keep the signal strength meter enabled. + */ - outb_p(bits, rt->isa.io); +static void send_0_byte(struct radio_isa_card *isa, int on) +{ + outb_p(128+64+16+on+1, isa->io); /* wr-enable + data low */ + outb_p(128+64+16+on+2+1, isa->io); /* clock */ + msleep(1); } -static struct radio_isa_card *rtrack_alloc(void) +static void send_1_byte(struct radio_isa_card *isa, int on) { - struct rtrack *rt = kzalloc(sizeof(struct rtrack), GFP_KERNEL); - - if (rt) { - rt->curvol = 0xff; - rt->lm.set_pins = rtrack_set_pins; - } - return rt ? &rt->isa : NULL; + outb_p(128+64+16+on+4+1, isa->io); /* wr-enable+data high */ + outb_p(128+64+16+on+4+2+1, isa->io); /* clock */ + msleep(1); } static int rtrack_s_frequency(struct radio_isa_card *isa, u32 freq) { - struct rtrack *rt = container_of(isa, struct rtrack, isa); + int on = v4l2_ctrl_g_ctrl(isa->mute) ? 0 : 8; + int i; + + freq += 171200; /* Add 10.7 MHz IF */ + freq /= 800; /* Convert to 50 kHz units */ + + send_0_byte(isa, on); /* 0: LSB of frequency */ + + for (i = 0; i < 13; i++) /* : frequency bits (1-13) */ + if (freq & (1 << i)) + send_1_byte(isa, on); + else + send_0_byte(isa, on); + + send_0_byte(isa, on); /* 14: test bit - always 0 */ + send_0_byte(isa, on); /* 15: test bit - always 0 */ + + send_0_byte(isa, on); /* 16: band data 0 - always 0 */ + send_0_byte(isa, on); /* 17: band data 1 - always 0 */ + send_0_byte(isa, on); /* 18: band data 2 - always 0 */ + send_0_byte(isa, on); /* 19: time base - always 0 */ - lm7000_set_freq(&rt->lm, freq); + send_0_byte(isa, on); /* 20: spacing (0 = 25 kHz) */ + send_1_byte(isa, on); /* 21: spacing (1 = 25 kHz) */ + send_0_byte(isa, on); /* 22: spacing (0 = 25 kHz) */ + send_1_byte(isa, on); /* 23: AM/FM (FM = 1, always) */ + outb(0xd0 + on, isa->io); /* volume steady + sigstr */ return 0; } -- 2.39.5