From 8fbe91e7918af8adfad45828ae8acfc2f01cb6a5 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 16 Sep 2016 07:47:08 -0300 Subject: [PATCH] [media] videodev2.h: checkpatch cleanup Format comments according to what checkpatch wants. No other changes. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/videodev2.h | 50 ++++++++++++++++++++-------------- 1 file changed, 30 insertions(+), 20 deletions(-) diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 4364ce6b0aa6..7d3e2e9673af 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -1303,33 +1303,43 @@ struct v4l2_bt_timings { /* Flags */ -/* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary - GTF' curve (GTF). In both cases the horizontal and/or vertical blanking - intervals are reduced, allowing a higher resolution over the same - bandwidth. This is a read-only flag. */ +/* + * CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary + * GTF' curve (GTF). In both cases the horizontal and/or vertical blanking + * intervals are reduced, allowing a higher resolution over the same + * bandwidth. This is a read-only flag. + */ #define V4L2_DV_FL_REDUCED_BLANKING (1 << 0) -/* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple - of six. These formats can be optionally played at 1 / 1.001 speed. - This is a read-only flag. */ +/* + * CEA-861 specific: set for CEA-861 formats with a framerate of a multiple + * of six. These formats can be optionally played at 1 / 1.001 speed. + * This is a read-only flag. + */ #define V4L2_DV_FL_CAN_REDUCE_FPS (1 << 1) -/* CEA-861 specific: only valid for video transmitters, the flag is cleared - by receivers. - If the framerate of the format is a multiple of six, then the pixelclock - used to set up the transmitter is divided by 1.001 to make it compatible - with 60 Hz based standards such as NTSC and PAL-M that use a framerate of - 29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate - such frequencies, then the flag will also be cleared. */ +/* + * CEA-861 specific: only valid for video transmitters, the flag is cleared + * by receivers. + * If the framerate of the format is a multiple of six, then the pixelclock + * used to set up the transmitter is divided by 1.001 to make it compatible + * with 60 Hz based standards such as NTSC and PAL-M that use a framerate of + * 29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate + * such frequencies, then the flag will also be cleared. + */ #define V4L2_DV_FL_REDUCED_FPS (1 << 2) -/* Specific to interlaced formats: if set, then field 1 is really one half-line - longer and field 2 is really one half-line shorter, so each field has - exactly the same number of half-lines. Whether half-lines can be detected - or used depends on the hardware. */ +/* + * Specific to interlaced formats: if set, then field 1 is really one half-line + * longer and field 2 is really one half-line shorter, so each field has + * exactly the same number of half-lines. Whether half-lines can be detected + * or used depends on the hardware. + */ #define V4L2_DV_FL_HALF_LINE (1 << 3) -/* If set, then this is a Consumer Electronics (CE) video format. Such formats +/* + * If set, then this is a Consumer Electronics (CE) video format. Such formats * differ from other formats (commonly called IT formats) in that if RGB * encoding is used then by default the RGB values use limited range (i.e. * use the range 16-235) as opposed to 0-255. All formats defined in CEA-861 - * except for the 640x480 format are CE formats. */ + * except for the 640x480 format are CE formats. + */ #define V4L2_DV_FL_IS_CE_VIDEO (1 << 4) /* Some formats like SMPTE-125M have an interlaced signal with a odd * total height. For these formats, if this flag is set, the first -- 2.39.5