From 91555ce9012557b2d621d7b0b6ec694218a2a9bc Mon Sep 17 00:00:00 2001 From: =?utf8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 24 Feb 2015 11:17:05 +0100 Subject: [PATCH] serial: imx: Fix clearing of receiver overrun flag MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit The writeable bits in the USR2 register are all "write 1 to clear" so only write the bits that actually should be cleared. Fixes: f1f836e4209e ("serial: imx: Add Rx Fifo overrun error message") Signed-off-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index ca00b3f1520f..0f2afae25f6e 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -818,7 +818,7 @@ static irqreturn_t imx_int(int irq, void *dev_id) if (sts2 & USR2_ORE) { dev_err(sport->port.dev, "Rx FIFO overrun\n"); sport->port.icount.overrun++; - writel(sts2 | USR2_ORE, sport->port.membase + USR2); + writel(USR2_ORE, sport->port.membase + USR2); } return IRQ_HANDLED; @@ -1181,10 +1181,12 @@ static int imx_startup(struct uart_port *port) imx_uart_dma_init(sport); spin_lock_irqsave(&sport->port.lock, flags); + /* * Finally, clear and enable interrupts */ writel(USR1_RTSD, sport->port.membase + USR1); + writel(USR2_ORE, sport->port.membase + USR2); if (sport->dma_is_inited && !sport->dma_is_enabled) imx_enable_dma(sport); @@ -1199,10 +1201,6 @@ static int imx_startup(struct uart_port *port) writel(temp, sport->port.membase + UCR1); - /* Clear any pending ORE flag before enabling interrupt */ - temp = readl(sport->port.membase + USR2); - writel(temp | USR2_ORE, sport->port.membase + USR2); - temp = readl(sport->port.membase + UCR4); temp |= UCR4_OREN; writel(temp, sport->port.membase + UCR4); -- 2.39.5