From 919e78a6b890bdcce8ca0fa699bd361c6f24dc94 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 26 Aug 2011 09:52:38 +0000 Subject: [PATCH] ixgbe: Make better use of memory allocations in one-buffer mode w/ RSC This patch improves the memory utilization with RSC when in one-buffer mode. This is accomplished by making the default buffer sizes match up with the standard memory allocation sizes minus 1K for shared info and padding overhead. By doing this CPU utilization when doing large receives can be reduced by as much as 8%. Signed-off-by: Alexander Duyck Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe.h | 11 +++-- .../net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 2 +- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 41 ++++++++++++------- 3 files changed, 35 insertions(+), 19 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 209286c04f0c..2c9fdf8ef5f1 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -72,10 +72,13 @@ /* Supported Rx Buffer Sizes */ #define IXGBE_RXBUFFER_512 512 /* Used for packet split */ -#define IXGBE_RXBUFFER_2048 2048 -#define IXGBE_RXBUFFER_4096 4096 -#define IXGBE_RXBUFFER_8192 8192 -#define IXGBE_MAX_RXBUFFER 16384 /* largest size for a single descriptor */ +#define IXGBE_RXBUFFER_2K 2048 +#define IXGBE_RXBUFFER_3K 3072 +#define IXGBE_RXBUFFER_4K 4096 +#define IXGBE_RXBUFFER_7K 7168 +#define IXGBE_RXBUFFER_8K 8192 +#define IXGBE_RXBUFFER_15K 15360 +#define IXGBE_MAX_RXBUFFER 16384 /* largest size for a single descriptor */ /* * NOTE: netdev_alloc_skb reserves up to 64 bytes, NET_IP_ALIGN mans we diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index b8410bcaa898..46f4ecf1bba3 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -1539,7 +1539,7 @@ static int ixgbe_setup_desc_rings(struct ixgbe_adapter *adapter) rx_ring->dev = &adapter->pdev->dev; rx_ring->netdev = adapter->netdev; rx_ring->reg_idx = adapter->rx_ring[0]->reg_idx; - rx_ring->rx_buf_len = IXGBE_RXBUFFER_2048; + rx_ring->rx_buf_len = IXGBE_RXBUFFER_2K; rx_ring->numa_node = adapter->node; err = ixgbe_setup_rx_resources(rx_ring); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index ce59dc642c6f..a4103efde363 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -499,7 +499,7 @@ rx_ring_summary: rx_ring->rx_buf_len, true); if (rx_ring->rx_buf_len - < IXGBE_RXBUFFER_2048) + < IXGBE_RXBUFFER_2K) print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 16, 1, phys_to_virt( @@ -2644,9 +2644,9 @@ static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter, rscctrl |= IXGBE_RSCCTL_MAXDESC_1; #endif } else { - if (rx_buf_len < IXGBE_RXBUFFER_4096) + if (rx_buf_len < IXGBE_RXBUFFER_4K) rscctrl |= IXGBE_RSCCTL_MAXDESC_16; - else if (rx_buf_len < IXGBE_RXBUFFER_8192) + else if (rx_buf_len < IXGBE_RXBUFFER_8K) rscctrl |= IXGBE_RSCCTL_MAXDESC_8; else rscctrl |= IXGBE_RSCCTL_MAXDESC_4; @@ -2879,17 +2879,6 @@ static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter) if (hw->mac.type == ixgbe_mac_82599EB) adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED; - /* Set the RX buffer length according to the mode */ - if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { - rx_buf_len = IXGBE_RX_HDR_SIZE; - } else { - if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) && - (netdev->mtu <= ETH_DATA_LEN)) - rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE; - else - rx_buf_len = ALIGN(max_frame + VLAN_HLEN, 1024); - } - #ifdef IXGBE_FCOE /* adjust max frame to be able to do baby jumbo for FCoE */ if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) && @@ -2905,6 +2894,30 @@ static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter) IXGBE_WRITE_REG(hw, IXGBE_MHADD, mhadd); } + /* MHADD will allow an extra 4 bytes past for vlan tagged frames */ + max_frame += VLAN_HLEN; + + /* Set the RX buffer length according to the mode */ + if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { + rx_buf_len = IXGBE_RX_HDR_SIZE; + } else { + if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) && + (netdev->mtu <= ETH_DATA_LEN)) + rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE; + /* + * Make best use of allocation by using all but 1K of a + * power of 2 allocation that will be used for skb->head. + */ + else if (max_frame <= IXGBE_RXBUFFER_3K) + rx_buf_len = IXGBE_RXBUFFER_3K; + else if (max_frame <= IXGBE_RXBUFFER_7K) + rx_buf_len = IXGBE_RXBUFFER_7K; + else if (max_frame <= IXGBE_RXBUFFER_15K) + rx_buf_len = IXGBE_RXBUFFER_15K; + else + rx_buf_len = IXGBE_MAX_RXBUFFER; + } + hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); /* set jumbo enable since MHADD.MFS is keeping size locked at max_frame */ hlreg0 |= IXGBE_HLREG0_JUMBOEN; -- 2.39.5