From 93e537a10f2c8c0f2e74409b6cb473fc221758fa Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 28 Mar 2012 23:11:26 +0200 Subject: [PATCH] drm/i915: split LVDS update code out of i9xx_crtc_mode_set Just to make things clearer and reduce the size of this monstrosity. v2: make sure 8xx PLL update function calls update_lvds too (Daniel) Signed-off-by: Jesse Barnes danvet: fixed patch ordering to avoid breaking bisect. Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 106 +++++++++++++++------------ 1 file changed, 58 insertions(+), 48 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index a7c2ddc96f0e..d6a394fdeb26 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5134,6 +5134,62 @@ static void i9xx_update_pll_dividers(struct drm_crtc *crtc, } } +static void intel_update_lvds(struct drm_crtc *crtc, intel_clock_t *clock, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + u32 temp, lvds_sync = 0; + + temp = I915_READ(LVDS); + temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; + if (pipe == 1) { + temp |= LVDS_PIPEB_SELECT; + } else { + temp &= ~LVDS_PIPEB_SELECT; + } + /* set the corresponsding LVDS_BORDER bit */ + temp |= dev_priv->lvds_border_bits; + /* Set the B0-B3 data pairs corresponding to whether we're going to + * set the DPLLs for dual-channel mode or not. + */ + if (clock->p2 == 7) + temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; + else + temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); + + /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) + * appropriately here, but we need to look more thoroughly into how + * panels behave in the two modes. + */ + /* set the dithering flag on LVDS as needed */ + if (INTEL_INFO(dev)->gen >= 4) { + if (dev_priv->lvds_dither) + temp |= LVDS_ENABLE_DITHER; + else + temp &= ~LVDS_ENABLE_DITHER; + } + if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) + lvds_sync |= LVDS_HSYNC_POLARITY; + if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) + lvds_sync |= LVDS_VSYNC_POLARITY; + if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY)) + != lvds_sync) { + char flags[2] = "-+"; + DRM_INFO("Changing LVDS panel from " + "(%chsync, %cvsync) to (%chsync, %cvsync)\n", + flags[!(temp & LVDS_HSYNC_POLARITY)], + flags[!(temp & LVDS_VSYNC_POLARITY)], + flags[!(lvds_sync & LVDS_HSYNC_POLARITY)], + flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]); + temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); + temp |= lvds_sync; + } + I915_WRITE(LVDS, temp); +} + static int i9xx_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, @@ -5155,7 +5211,6 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, const intel_limit_t *limit; int ret; u32 temp; - u32 lvds_sync = 0; list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { if (encoder->base.crtc != crtc) @@ -5341,53 +5396,8 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, * This is an exception to the general rule that mode_set doesn't turn * things on. */ - if (is_lvds) { - temp = I915_READ(LVDS); - temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; - if (pipe == 1) { - temp |= LVDS_PIPEB_SELECT; - } else { - temp &= ~LVDS_PIPEB_SELECT; - } - /* set the corresponsding LVDS_BORDER bit */ - temp |= dev_priv->lvds_border_bits; - /* Set the B0-B3 data pairs corresponding to whether we're going to - * set the DPLLs for dual-channel mode or not. - */ - if (clock.p2 == 7) - temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; - else - temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); - - /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) - * appropriately here, but we need to look more thoroughly into how - * panels behave in the two modes. - */ - /* set the dithering flag on LVDS as needed */ - if (INTEL_INFO(dev)->gen >= 4) { - if (dev_priv->lvds_dither) - temp |= LVDS_ENABLE_DITHER; - else - temp &= ~LVDS_ENABLE_DITHER; - } - if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) - lvds_sync |= LVDS_HSYNC_POLARITY; - if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) - lvds_sync |= LVDS_VSYNC_POLARITY; - if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY)) - != lvds_sync) { - char flags[2] = "-+"; - DRM_INFO("Changing LVDS panel from " - "(%chsync, %cvsync) to (%chsync, %cvsync)\n", - flags[!(temp & LVDS_HSYNC_POLARITY)], - flags[!(temp & LVDS_VSYNC_POLARITY)], - flags[!(lvds_sync & LVDS_HSYNC_POLARITY)], - flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]); - temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); - temp |= lvds_sync; - } - I915_WRITE(LVDS, temp); - } + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) + intel_update_lvds(crtc, &clock, adjusted_mode); if (is_dp) { intel_dp_set_m_n(crtc, mode, adjusted_mode); -- 2.39.5