From 96c78e2b7733f1e0e4170ecead34ff2b11ce0bd1 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Wed, 23 Dec 2015 15:05:41 +0100 Subject: [PATCH] ARM: dts: armada-38x: use usb-nop-xceiv PHY for the xhci nodes on Armada 388 GP Using the usb-nop-xceiv PHY for the xhci nodes allows a better representation of the hardware but also a better handling of the regulator. By linking the regulator to the PHY there is no more need to use the regulator-always-on property, then it allows a better power management. The remaining usb node uses the ehci-orion driver which can't be used with the usb-nop-xceiv PHY and must keeps the direct link to the regulator with the regulator-always-on property. Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-388-gp.dts | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index ac3c9445ce57..51943598d858 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -229,13 +229,13 @@ /* CON5 */ usb3@f0000 { - vcc-supply = <®_usb2_1_vbus>; + usb-phy = <&usb2_1_phy>; status = "okay"; }; /* CON7 */ usb3@f8000 { - vcc-supply = <®_usb3_vbus>; + usb-phy = <&usb3_phy>; status = "okay"; }; }; @@ -273,13 +273,22 @@ }; }; + usb2_1_phy: usb2_1_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_usb2_1_vbus>; + }; + + usb3_phy: usb3_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_usb3_vbus>; + }; + reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; regulator-name = "usb3-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - regulator-always-on; gpio = <&expander1 15 GPIO_ACTIVE_HIGH>; }; @@ -299,7 +308,6 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - regulator-always-on; gpio = <&expander0 4 GPIO_ACTIVE_HIGH>; }; -- 2.39.5