From 9b34e6cc3bc2bf826c078c93c81b46f6c08da25f Mon Sep 17 00:00:00 2001 From: Zeng Zhaoming Date: Thu, 24 Feb 2011 02:08:21 +0800 Subject: [PATCH] ASoC: Add Freescale SGTL5000 codec support Add Freescale SGTL5000 codec support. Supported features: - line-in and mic input - headphone and line-out output - line-in bypass ADC and DAC to headphone - 16, 20, 24, 32 bit audio - 8 ~ 96k sample rates Signed-off-by: Zeng Zhaoming Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/sgtl5000.c | 1512 +++++++++++++++++++++++++++++++++++ sound/soc/codecs/sgtl5000.h | 402 ++++++++++ 4 files changed, 1921 insertions(+) create mode 100644 sound/soc/codecs/sgtl5000.c create mode 100644 sound/soc/codecs/sgtl5000.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index e239345a4d5d..c04da1871297 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -33,6 +33,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_MAX98088 if I2C select SND_SOC_MAX9877 if I2C select SND_SOC_PCM3008 + select SND_SOC_SGTL5000 if I2C select SND_SOC_SN95031 if INTEL_SCU_IPC select SND_SOC_SPDIF select SND_SOC_SSM2602 if I2C @@ -182,6 +183,10 @@ config SND_SOC_MAX98088 config SND_SOC_PCM3008 tristate +#Freescale sgtl5000 codec +config SND_SOC_SGTL5000 + tristate + config SND_SOC_SN95031 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index ae10507dd2e1..3bbb08c512d0 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -19,6 +19,7 @@ snd-soc-dmic-objs := dmic.o snd-soc-l3-objs := l3.o snd-soc-max98088-objs := max98088.o snd-soc-pcm3008-objs := pcm3008.o +snd-soc-sgtl5000-objs := sgtl5000.o snd-soc-alc5623-objs := alc5623.o snd-soc-sn95031-objs := sn95031.o snd-soc-spdif-objs := spdif_transciever.o @@ -103,6 +104,7 @@ obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o obj-$(CONFIG_SND_SOC_JZ4740_CODEC) += snd-soc-jz4740-codec.o obj-$(CONFIG_SND_SOC_MAX98088) += snd-soc-max98088.o obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o +obj-$(CONFIG_SND_SOC_SGTL5000) += snd-soc-sgtl5000.o obj-$(CONFIG_SND_SOC_SN95031) +=snd-soc-sn95031.o obj-$(CONFIG_SND_SOC_SPDIF) += snd-soc-spdif.o obj-$(CONFIG_SND_SOC_SSM2602) += snd-soc-ssm2602.o diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c new file mode 100644 index 000000000000..9eb206e852db --- /dev/null +++ b/sound/soc/codecs/sgtl5000.c @@ -0,0 +1,1512 @@ +/* + * sgtl5000.c -- SGTL5000 ALSA SoC Audio driver + * + * Copyright 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sgtl5000.h" + +#define SGTL5000_DAP_REG_OFFSET 0x0100 +#define SGTL5000_MAX_REG_OFFSET 0x013A + +/* default value of sgtl5000 registers except DAP */ +static const u16 sgtl5000_regs[SGTL5000_MAX_REG_OFFSET >> 1] = { + 0xa011, /* 0x0000, CHIP_ID. 11 stand for revison 17 */ + 0x0000, /* 0x0002, CHIP_DIG_POWER. */ + 0x0008, /* 0x0004, CHIP_CKL_CTRL */ + 0x0010, /* 0x0006, CHIP_I2S_CTRL */ + 0x0000, /* 0x0008, reserved */ + 0x0008, /* 0x000A, CHIP_SSS_CTRL */ + 0x0000, /* 0x000C, reserved */ + 0x020c, /* 0x000E, CHIP_ADCDAC_CTRL */ + 0x3c3c, /* 0x0010, CHIP_DAC_VOL */ + 0x0000, /* 0x0012, reserved */ + 0x015f, /* 0x0014, CHIP_PAD_STRENGTH */ + 0x0000, /* 0x0016, reserved */ + 0x0000, /* 0x0018, reserved */ + 0x0000, /* 0x001A, reserved */ + 0x0000, /* 0x001E, reserved */ + 0x0000, /* 0x0020, CHIP_ANA_ADC_CTRL */ + 0x1818, /* 0x0022, CHIP_ANA_HP_CTRL */ + 0x0111, /* 0x0024, CHIP_ANN_CTRL */ + 0x0000, /* 0x0026, CHIP_LINREG_CTRL */ + 0x0000, /* 0x0028, CHIP_REF_CTRL */ + 0x0000, /* 0x002A, CHIP_MIC_CTRL */ + 0x0000, /* 0x002C, CHIP_LINE_OUT_CTRL */ + 0x0404, /* 0x002E, CHIP_LINE_OUT_VOL */ + 0x7060, /* 0x0030, CHIP_ANA_POWER */ + 0x5000, /* 0x0032, CHIP_PLL_CTRL */ + 0x0000, /* 0x0034, CHIP_CLK_TOP_CTRL */ + 0x0000, /* 0x0036, CHIP_ANA_STATUS */ + 0x0000, /* 0x0038, reserved */ + 0x0000, /* 0x003A, CHIP_ANA_TEST2 */ + 0x0000, /* 0x003C, CHIP_SHORT_CTRL */ + 0x0000, /* reserved */ +}; + +/* default value of dap registers */ +static const u16 sgtl5000_dap_regs[] = { + 0x0000, /* 0x0100, DAP_CONTROL */ + 0x0000, /* 0x0102, DAP_PEQ */ + 0x0040, /* 0x0104, DAP_BASS_ENHANCE */ + 0x051f, /* 0x0106, DAP_BASS_ENHANCE_CTRL */ + 0x0000, /* 0x0108, DAP_AUDIO_EQ */ + 0x0040, /* 0x010A, DAP_SGTL_SURROUND */ + 0x0000, /* 0x010C, DAP_FILTER_COEF_ACCESS */ + 0x0000, /* 0x010E, DAP_COEF_WR_B0_MSB */ + 0x0000, /* 0x0110, DAP_COEF_WR_B0_LSB */ + 0x0000, /* 0x0112, reserved */ + 0x0000, /* 0x0114, reserved */ + 0x002f, /* 0x0116, DAP_AUDIO_EQ_BASS_BAND0 */ + 0x002f, /* 0x0118, DAP_AUDIO_EQ_BAND0 */ + 0x002f, /* 0x011A, DAP_AUDIO_EQ_BAND2 */ + 0x002f, /* 0x011C, DAP_AUDIO_EQ_BAND3 */ + 0x002f, /* 0x011E, DAP_AUDIO_EQ_TREBLE_BAND4 */ + 0x8000, /* 0x0120, DAP_MAIN_CHAN */ + 0x0000, /* 0x0122, DAP_MIX_CHAN */ + 0x0510, /* 0x0124, DAP_AVC_CTRL */ + 0x1473, /* 0x0126, DAP_AVC_THRESHOLD */ + 0x0028, /* 0x0128, DAP_AVC_ATTACK */ + 0x0050, /* 0x012A, DAP_AVC_DECAY */ + 0x0000, /* 0x012C, DAP_COEF_WR_B1_MSB */ + 0x0000, /* 0x012E, DAP_COEF_WR_B1_LSB */ + 0x0000, /* 0x0130, DAP_COEF_WR_B2_MSB */ + 0x0000, /* 0x0132, DAP_COEF_WR_B2_LSB */ + 0x0000, /* 0x0134, DAP_COEF_WR_A1_MSB */ + 0x0000, /* 0x0136, DAP_COEF_WR_A1_LSB */ + 0x0000, /* 0x0138, DAP_COEF_WR_A2_MSB */ + 0x0000, /* 0x013A, DAP_COEF_WR_A2_LSB */ +}; + +/* regulator supplies for sgtl5000, VDDD is an optional external supply */ +enum sgtl5000_regulator_supplies { + VDDA, + VDDIO, + VDDD, + SGTL5000_SUPPLY_NUM +}; + +/* vddd is optional supply */ +static const char *supply_names[SGTL5000_SUPPLY_NUM] = { + "VDDA", + "VDDIO", + "VDDD" +}; + +#define LDO_CONSUMER_NAME "VDDD_LDO" +#define LDO_VOLTAGE 1200000 + +static struct regulator_consumer_supply ldo_consumer[] = { + REGULATOR_SUPPLY(LDO_CONSUMER_NAME, NULL), +}; + +struct regulator_init_data ldo_init_data = { + .constraints = { + .min_uV = 850000, + .max_uV = 1600000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &ldo_consumer[0], +}; + +/* + * sgtl5000 internal ldo regulator, + * enabled when VDDD not provided + */ +struct ldo_regulator { + struct regulator_desc desc; + struct regulator_dev *dev; + int voltage; + void *codec_data; + bool enabled; +}; + +/* sgtl5000 private structure in codec */ +struct sgtl5000_priv { + int sysclk; /* sysclk rate */ + int master; /* i2s master or not */ + int fmt; /* i2s data format */ + struct regulator_bulk_data supplies[SGTL5000_SUPPLY_NUM]; + struct ldo_regulator *ldo; +}; + +/* + * mic_bias power on/off share the same register bits with + * output impedance of mic bias, when power on mic bias, we + * need reclaim it to impedance value. + * 0x0 = Powered off + * 0x1 = 2Kohm + * 0x2 = 4Kohm + * 0x3 = 8Kohm + */ +static int mic_bias_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + switch (event) { + case SND_SOC_DAPM_POST_PMU: + /* change mic bias resistor to 4Kohm */ + snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL, + SGTL5000_BIAS_R_4k, SGTL5000_BIAS_R_4k); + break; + + case SND_SOC_DAPM_PRE_PMD: + /* + * SGTL5000_BIAS_R_8k as mask to clean the two bits + * of mic bias and output impedance + */ + snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL, + SGTL5000_BIAS_R_8k, 0); + break; + } + return 0; +} + +/* + * using codec assist to small pop, hp_powerup or lineout_powerup + * should stay setting until vag_powerup is fully ramped down, + * vag fully ramped down require 400ms. + */ +static int small_pop_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER, + SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP); + break; + + case SND_SOC_DAPM_PRE_PMD: + snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER, + SGTL5000_VAG_POWERUP, 0); + msleep(400); + break; + default: + break; + } + + return 0; +} + +/* input sources for ADC */ +static const char *adc_mux_text[] = { + "MIC_IN", "LINE_IN" +}; + +static const struct soc_enum adc_enum = +SOC_ENUM_SINGLE(SGTL5000_CHIP_ANA_CTRL, 2, 2, adc_mux_text); + +static const struct snd_kcontrol_new adc_mux = +SOC_DAPM_ENUM("Capture Mux", adc_enum); + +/* input sources for DAC */ +static const char *dac_mux_text[] = { + "DAC", "LINE_IN" +}; + +static const struct soc_enum dac_enum = +SOC_ENUM_SINGLE(SGTL5000_CHIP_ANA_CTRL, 6, 2, dac_mux_text); + +static const struct snd_kcontrol_new dac_mux = +SOC_DAPM_ENUM("Headphone Mux", dac_enum); + +static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = { + SND_SOC_DAPM_INPUT("LINE_IN"), + SND_SOC_DAPM_INPUT("MIC_IN"), + + SND_SOC_DAPM_OUTPUT("HP_OUT"), + SND_SOC_DAPM_OUTPUT("LINE_OUT"), + + SND_SOC_DAPM_MICBIAS_E("Mic Bias", SGTL5000_CHIP_MIC_CTRL, 8, 0, + mic_bias_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + + SND_SOC_DAPM_PGA_E("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0, + small_pop_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_PGA_E("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0, + small_pop_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + + SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux), + SND_SOC_DAPM_MUX("Headphone Mux", SND_SOC_NOPM, 0, 0, &dac_mux), + + /* aif for i2s input */ + SND_SOC_DAPM_AIF_IN("AIFIN", "Playback", + 0, SGTL5000_CHIP_DIG_POWER, + 0, 0), + + /* aif for i2s output */ + SND_SOC_DAPM_AIF_OUT("AIFOUT", "Capture", + 0, SGTL5000_CHIP_DIG_POWER, + 1, 0), + + SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0), + + SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0), +}; + +/* routes for sgtl5000 */ +static const struct snd_soc_dapm_route audio_map[] = { + {"Capture Mux", "LINE_IN", "LINE_IN"}, /* line_in --> adc_mux */ + {"Capture Mux", "MIC_IN", "MIC_IN"}, /* mic_in --> adc_mux */ + + {"ADC", NULL, "Capture Mux"}, /* adc_mux --> adc */ + {"AIFOUT", NULL, "ADC"}, /* adc --> i2s_out */ + + {"DAC", NULL, "AIFIN"}, /* i2s-->dac,skip audio mux */ + {"Headphone Mux", "DAC", "DAC"}, /* dac --> hp_mux */ + {"LO", NULL, "DAC"}, /* dac --> line_out */ + + {"Headphone Mux", "LINE_IN", "LINE_IN"},/* line_in --> hp_mux */ + {"HP", NULL, "Headphone Mux"}, /* hp_mux --> hp */ + + {"LINE_OUT", NULL, "LO"}, + {"HP_OUT", NULL, "HP"}, +}; + +/* custom function to fetch info of PCM playback volume */ +static int dac_info_volsw(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 0xfc - 0x3c; + return 0; +} + +/* + * custom function to get of PCM playback volume + * + * dac volume register + * 15-------------8-7--------------0 + * | R channel vol | L channel vol | + * ------------------------------- + * + * PCM volume with 0.5017 dB steps from 0 to -90 dB + * + * register values map to dB + * 0x3B and less = Reserved + * 0x3C = 0 dB + * 0x3D = -0.5 dB + * 0xF0 = -90 dB + * 0xFC and greater = Muted + * + * register value map to userspace value + * + * register value 0x3c(0dB) 0xf0(-90dB)0xfc + * ------------------------------ + * userspace value 0xc0 0 + */ +static int dac_get_volsw(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + int reg; + int l; + int r; + + reg = snd_soc_read(codec, SGTL5000_CHIP_DAC_VOL); + + /* get left channel volume */ + l = (reg & SGTL5000_DAC_VOL_LEFT_MASK) >> SGTL5000_DAC_VOL_LEFT_SHIFT; + + /* get right channel volume */ + r = (reg & SGTL5000_DAC_VOL_RIGHT_MASK) >> SGTL5000_DAC_VOL_RIGHT_SHIFT; + + /* make sure value fall in (0x3c,0xfc) */ + l = clamp(l, 0x3c, 0xfc); + r = clamp(r, 0x3c, 0xfc); + + /* invert it and map to userspace value */ + l = 0xfc - l; + r = 0xfc - r; + + ucontrol->value.integer.value[0] = l; + ucontrol->value.integer.value[1] = r; + + return 0; +} + +/* + * custom function to put of PCM playback volume + * + * dac volume register + * 15-------------8-7--------------0 + * | R channel vol | L channel vol | + * ------------------------------- + * + * PCM volume with 0.5017 dB steps from 0 to -90 dB + * + * register values map to dB + * 0x3B and less = Reserved + * 0x3C = 0 dB + * 0x3D = -0.5 dB + * 0xF0 = -90 dB + * 0xFC and greater = Muted + * + * userspace value map to register value + * + * userspace value 0xc0 0 + * ------------------------------ + * register value 0x3c(0dB) 0xf0(-90dB)0xfc + */ +static int dac_put_volsw(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + int reg; + int l; + int r; + + l = ucontrol->value.integer.value[0]; + r = ucontrol->value.integer.value[1]; + + /* make sure userspace volume fall in (0, 0xfc-0x3c) */ + l = clamp(l, 0, 0xfc - 0x3c); + r = clamp(r, 0, 0xfc - 0x3c); + + /* invert it, get the value can be set to register */ + l = 0xfc - l; + r = 0xfc - r; + + /* shift to get the register value */ + reg = l << SGTL5000_DAC_VOL_LEFT_SHIFT | + r << SGTL5000_DAC_VOL_RIGHT_SHIFT; + + snd_soc_write(codec, SGTL5000_CHIP_DAC_VOL, reg); + + return 0; +} + +static const DECLARE_TLV_DB_SCALE(capture_6db_attenuate, -600, 600, 0); + +/* tlv for mic gain, 0db 20db 30db 40db */ +static const unsigned int mic_gain_tlv[] = { + TLV_DB_RANGE_HEAD(4), + 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0), + 1, 3, TLV_DB_SCALE_ITEM(2000, 1000, 0), +}; + +/* tlv for hp volume, -51.5db to 12.0db, step .5db */ +static const DECLARE_TLV_DB_SCALE(headphone_volume, -5150, 50, 0); + +static const struct snd_kcontrol_new sgtl5000_snd_controls[] = { + /* SOC_DOUBLE_S8_TLV with invert */ + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "PCM Playback Volume", + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | + SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = dac_info_volsw, + .get = dac_get_volsw, + .put = dac_put_volsw, + }, + + SOC_DOUBLE("Capture Volume", SGTL5000_CHIP_ANA_ADC_CTRL, 0, 4, 0xf, 0), + SOC_SINGLE_TLV("Capture Attenuate Switch (-6dB)", + SGTL5000_CHIP_ANA_ADC_CTRL, + 8, 2, 0, capture_6db_attenuate), + SOC_SINGLE("Capture ZC Switch", SGTL5000_CHIP_ANA_CTRL, 1, 1, 0), + + SOC_DOUBLE_TLV("Headphone Playback Volume", + SGTL5000_CHIP_ANA_HP_CTRL, + 0, 8, + 0x7f, 1, + headphone_volume), + SOC_SINGLE("Headphone Playback ZC Switch", SGTL5000_CHIP_ANA_CTRL, + 5, 1, 0), + + SOC_SINGLE_TLV("Mic Volume", SGTL5000_CHIP_MIC_CTRL, + 0, 4, 0, mic_gain_tlv), +}; + +/* mute the codec used by alsa core */ +static int sgtl5000_digital_mute(struct snd_soc_dai *codec_dai, int mute) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 adcdac_ctrl = SGTL5000_DAC_MUTE_LEFT | SGTL5000_DAC_MUTE_RIGHT; + + snd_soc_update_bits(codec, SGTL5000_CHIP_ADCDAC_CTRL, + adcdac_ctrl, mute ? adcdac_ctrl : 0); + + return 0; +} + +/* set codec format */ +static int sgtl5000_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); + u16 i2sctl = 0; + + sgtl5000->master = 0; + /* + * i2s clock and frame master setting. + * ONLY support: + * - clock and frame slave, + * - clock and frame master + */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + break; + case SND_SOC_DAIFMT_CBM_CFM: + i2sctl |= SGTL5000_I2S_MASTER; + sgtl5000->master = 1; + break; + default: + return -EINVAL; + } + + /* setting i2s data format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_DSP_A: + i2sctl |= SGTL5000_I2S_MODE_PCM; + break; + case SND_SOC_DAIFMT_DSP_B: + i2sctl |= SGTL5000_I2S_MODE_PCM; + i2sctl |= SGTL5000_I2S_LRALIGN; + break; + case SND_SOC_DAIFMT_I2S: + i2sctl |= SGTL5000_I2S_MODE_I2S_LJ; + break; + case SND_SOC_DAIFMT_RIGHT_J: + i2sctl |= SGTL5000_I2S_MODE_RJ; + i2sctl |= SGTL5000_I2S_LRPOL; + break; + case SND_SOC_DAIFMT_LEFT_J: + i2sctl |= SGTL5000_I2S_MODE_I2S_LJ; + i2sctl |= SGTL5000_I2S_LRALIGN; + break; + default: + return -EINVAL; + } + + sgtl5000->fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK; + + /* Clock inversion */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + i2sctl |= SGTL5000_I2S_SCLK_INV; + break; + default: + return -EINVAL; + } + + snd_soc_write(codec, SGTL5000_CHIP_I2S_CTRL, i2sctl); + + return 0; +} + +/* set codec sysclk */ +static int sgtl5000_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); + + switch (clk_id) { + case SGTL5000_SYSCLK: + sgtl5000->sysclk = freq; + break; + default: + return -EINVAL; + } + + return 0; +} + +/* + * set clock according to i2s frame clock, + * sgtl5000 provide 2 clock sources. + * 1. sys_mclk. sample freq can only configure to + * 1/256, 1/384, 1/512 of sys_mclk. + * 2. pll. can derive any audio clocks. + * + * clock setting rules: + * 1. in slave mode, only sys_mclk can use. + * 2. as constraint by sys_mclk, sample freq should + * set to 32k, 44.1k and above. + * 3. using sys_mclk prefer to pll to save power. + */ +static int sgtl5000_set_clock(struct snd_soc_codec *codec, int frame_rate) +{ + struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); + int clk_ctl = 0; + int sys_fs; /* sample freq */ + + /* + * sample freq should be divided by frame clock, + * if frame clock lower than 44.1khz, sample feq should set to + * 32khz or 44.1khz. + */ + switch (frame_rate) { + case 8000: + case 16000: + sys_fs = 32000; + break; + case 11025: + case 22050: + sys_fs = 44100; + break; + default: + sys_fs = frame_rate; + break; + } + + /* set divided factor of frame clock */ + switch (sys_fs / frame_rate) { + case 4: + clk_ctl |= SGTL5000_RATE_MODE_DIV_4 << SGTL5000_RATE_MODE_SHIFT; + break; + case 2: + clk_ctl |= SGTL5000_RATE_MODE_DIV_2 << SGTL5000_RATE_MODE_SHIFT; + break; + case 1: + clk_ctl |= SGTL5000_RATE_MODE_DIV_1 << SGTL5000_RATE_MODE_SHIFT; + break; + default: + return -EINVAL; + } + + /* set the sys_fs according to frame rate */ + switch (sys_fs) { + case 32000: + clk_ctl |= SGTL5000_SYS_FS_32k << SGTL5000_SYS_FS_SHIFT; + break; + case 44100: + clk_ctl |= SGTL5000_SYS_FS_44_1k << SGTL5000_SYS_FS_SHIFT; + break; + case 48000: + clk_ctl |= SGTL5000_SYS_FS_48k << SGTL5000_SYS_FS_SHIFT; + break; + case 96000: + clk_ctl |= SGTL5000_SYS_FS_96k << SGTL5000_SYS_FS_SHIFT; + break; + default: + dev_err(codec->dev, "frame rate %d not supported\n", + frame_rate); + return -EINVAL; + } + + /* + * calculate the divider of mclk/sample_freq, + * factor of freq =96k can only be 256, since mclk in range (12m,27m) + */ + switch (sgtl5000->sysclk / sys_fs) { + case 256: + clk_ctl |= SGTL5000_MCLK_FREQ_256FS << + SGTL5000_MCLK_FREQ_SHIFT; + break; + case 384: + clk_ctl |= SGTL5000_MCLK_FREQ_384FS << + SGTL5000_MCLK_FREQ_SHIFT; + break; + case 512: + clk_ctl |= SGTL5000_MCLK_FREQ_512FS << + SGTL5000_MCLK_FREQ_SHIFT; + break; + default: + /* if mclk not satisify the divider, use pll */ + if (sgtl5000->master) { + clk_ctl |= SGTL5000_MCLK_FREQ_PLL << + SGTL5000_MCLK_FREQ_SHIFT; + } else { + dev_err(codec->dev, + "PLL not supported in slave mode\n"); + return -EINVAL; + } + } + + /* if using pll, please check manual 6.4.2 for detail */ + if ((clk_ctl & SGTL5000_MCLK_FREQ_MASK) == SGTL5000_MCLK_FREQ_PLL) { + u64 out, t; + int div2; + int pll_ctl; + unsigned int in, int_div, frac_div; + + if (sgtl5000->sysclk > 17000000) { + div2 = 1; + in = sgtl5000->sysclk / 2; + } else { + div2 = 0; + in = sgtl5000->sysclk; + } + if (sys_fs == 44100) + out = 180633600; + else + out = 196608000; + t = do_div(out, in); + int_div = out; + t *= 2048; + do_div(t, in); + frac_div = t; + pll_ctl = int_div << SGTL5000_PLL_INT_DIV_SHIFT | + frac_div << SGTL5000_PLL_FRAC_DIV_SHIFT; + + snd_soc_write(codec, SGTL5000_CHIP_PLL_CTRL, pll_ctl); + if (div2) + snd_soc_update_bits(codec, + SGTL5000_CHIP_CLK_TOP_CTRL, + SGTL5000_INPUT_FREQ_DIV2, + SGTL5000_INPUT_FREQ_DIV2); + else + snd_soc_update_bits(codec, + SGTL5000_CHIP_CLK_TOP_CTRL, + SGTL5000_INPUT_FREQ_DIV2, + 0); + + /* power up pll */ + snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, + SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP, + SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP); + } else { + /* power down pll */ + snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, + SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP, + 0); + } + + /* if using pll, clk_ctrl must be set after pll power up */ + snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL, clk_ctl); + + return 0; +} + +/* + * Set PCM DAI bit size and sample rate. + * input: params_rate, params_fmt + */ +static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_codec *codec = rtd->codec; + struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); + int channels = params_channels(params); + int i2s_ctl = 0; + int stereo; + int ret; + + /* sysclk should already set */ + if (!sgtl5000->sysclk) { + dev_err(codec->dev, "%s: set sysclk first!\n", __func__); + return -EFAULT; + } + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + stereo = SGTL5000_DAC_STEREO; + else + stereo = SGTL5000_ADC_STEREO; + + /* set mono to save power */ + snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, stereo, + channels == 1 ? 0 : stereo); + + /* set codec clock base on lrclk */ + ret = sgtl5000_set_clock(codec, params_rate(params)); + if (ret) + return ret; + + /* set i2s data format */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J) + return -EINVAL; + i2s_ctl |= SGTL5000_I2S_DLEN_16 << SGTL5000_I2S_DLEN_SHIFT; + i2s_ctl |= SGTL5000_I2S_SCLKFREQ_32FS << + SGTL5000_I2S_SCLKFREQ_SHIFT; + break; + case SNDRV_PCM_FORMAT_S20_3LE: + i2s_ctl |= SGTL5000_I2S_DLEN_20 << SGTL5000_I2S_DLEN_SHIFT; + i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS << + SGTL5000_I2S_SCLKFREQ_SHIFT; + break; + case SNDRV_PCM_FORMAT_S24_LE: + i2s_ctl |= SGTL5000_I2S_DLEN_24 << SGTL5000_I2S_DLEN_SHIFT; + i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS << + SGTL5000_I2S_SCLKFREQ_SHIFT; + break; + case SNDRV_PCM_FORMAT_S32_LE: + if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J) + return -EINVAL; + i2s_ctl |= SGTL5000_I2S_DLEN_32 << SGTL5000_I2S_DLEN_SHIFT; + i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS << + SGTL5000_I2S_SCLKFREQ_SHIFT; + break; + default: + return -EINVAL; + } + + snd_soc_update_bits(codec, SGTL5000_CHIP_I2S_CTRL, i2s_ctl, i2s_ctl); + + return 0; +} + +static int ldo_regulator_is_enabled(struct regulator_dev *dev) +{ + struct ldo_regulator *ldo = rdev_get_drvdata(dev); + + return ldo->enabled; +} + +static int ldo_regulator_enable(struct regulator_dev *dev) +{ + struct ldo_regulator *ldo = rdev_get_drvdata(dev); + struct snd_soc_codec *codec = (struct snd_soc_codec *)ldo->codec_data; + int reg; + + if (ldo_regulator_is_enabled(dev)) + return 0; + + /* set regulator value firstly */ + reg = (1600 - ldo->voltage / 1000) / 50; + reg = clamp(reg, 0x0, 0xf); + + /* amend the voltage value, unit: uV */ + ldo->voltage = (1600 - reg * 50) * 1000; + + /* set voltage to register */ + snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL, + (0x1 << 4) - 1, reg); + + snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, + SGTL5000_LINEREG_D_POWERUP, + SGTL5000_LINEREG_D_POWERUP); + + /* when internal ldo enabled, simple digital power can be disabled */ + snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, + SGTL5000_LINREG_SIMPLE_POWERUP, + 0); + + ldo->enabled = 1; + return 0; +} + +static int ldo_regulator_disable(struct regulator_dev *dev) +{ + struct ldo_regulator *ldo = rdev_get_drvdata(dev); + struct snd_soc_codec *codec = (struct snd_soc_codec *)ldo->codec_data; + + snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, + SGTL5000_LINEREG_D_POWERUP, + 0); + + /* clear voltage info */ + snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL, + (0x1 << 4) - 1, 0); + + ldo->enabled = 0; + + return 0; +} + +static int ldo_regulator_get_voltage(struct regulator_dev *dev) +{ + struct ldo_regulator *ldo = rdev_get_drvdata(dev); + + return ldo->voltage; +} + +static struct regulator_ops ldo_regulator_ops = { + .is_enabled = ldo_regulator_is_enabled, + .enable = ldo_regulator_enable, + .disable = ldo_regulator_disable, + .get_voltage = ldo_regulator_get_voltage, +}; + +static int ldo_regulator_register(struct snd_soc_codec *codec, + struct regulator_init_data *init_data, + int voltage) +{ + struct ldo_regulator *ldo; + + ldo = kzalloc(sizeof(struct ldo_regulator), GFP_KERNEL); + + if (!ldo) { + dev_err(codec->dev, "failed to allocate ldo_regulator\n"); + return -ENOMEM; + } + + ldo->desc.name = kstrdup(dev_name(codec->dev), GFP_KERNEL); + if (!ldo->desc.name) { + kfree(ldo); + dev_err(codec->dev, "failed to allocate decs name memory\n"); + return -ENOMEM; + } + + ldo->desc.type = REGULATOR_VOLTAGE; + ldo->desc.owner = THIS_MODULE; + ldo->desc.ops = &ldo_regulator_ops; + ldo->desc.n_voltages = 1; + + ldo->codec_data = codec; + ldo->voltage = voltage; + + ldo->dev = regulator_register(&ldo->desc, codec->dev, + init_data, ldo); + if (IS_ERR(ldo->dev)) { + dev_err(codec->dev, "failed to register regulator\n"); + kfree(ldo->desc.name); + kfree(ldo); + + return PTR_ERR(ldo->dev); + } + + return 0; +} + +static int ldo_regulator_remove(struct snd_soc_codec *codec) +{ + struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); + struct ldo_regulator *ldo = sgtl5000->ldo; + + if (!ldo) + return 0; + + regulator_unregister(ldo->dev); + kfree(ldo->desc.name); + kfree(ldo); + + return 0; +} + +/* + * set dac bias + * common state changes: + * startup: + * off --> standby --> prepare --> on + * standby --> prepare --> on + * + * stop: + * on --> prepare --> standby + */ +static int sgtl5000_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + int ret; + struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); + + switch (level) { + case SND_SOC_BIAS_ON: + case SND_SOC_BIAS_PREPARE: + break; + case SND_SOC_BIAS_STANDBY: + if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { + ret = regulator_bulk_enable( + ARRAY_SIZE(sgtl5000->supplies), + sgtl5000->supplies); + if (ret) + return ret; + udelay(10); + } + + break; + case SND_SOC_BIAS_OFF: + regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies), + sgtl5000->supplies); + break; + } + + codec->dapm.bias_level = level; + return 0; +} + +#define SGTL5000_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S20_3LE |\ + SNDRV_PCM_FMTBIT_S24_LE |\ + SNDRV_PCM_FMTBIT_S32_LE) + +struct snd_soc_dai_ops sgtl5000_ops = { + .hw_params = sgtl5000_pcm_hw_params, + .digital_mute = sgtl5000_digital_mute, + .set_fmt = sgtl5000_set_dai_fmt, + .set_sysclk = sgtl5000_set_dai_sysclk, +}; + +static struct snd_soc_dai_driver sgtl5000_dai = { + .name = "sgtl5000", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + /* + * only support 8~48K + 96K, + * TODO modify hw_param to support more + */ + .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000, + .formats = SGTL5000_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000, + .formats = SGTL5000_FORMATS, + }, + .ops = &sgtl5000_ops, + .symmetric_rates = 1, +}; + +static int sgtl5000_volatile_register(struct snd_soc_codec *codec, + unsigned int reg) +{ + switch (reg) { + case SGTL5000_CHIP_ID: + case SGTL5000_CHIP_ADCDAC_CTRL: + case SGTL5000_CHIP_ANA_STATUS: + return 1; + } + + return 0; +} + +#ifdef CONFIG_SUSPEND +static int sgtl5000_suspend(struct snd_soc_codec *codec, pm_message_t state) +{ + sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF); + + return 0; +} + +/* + * restore all sgtl5000 registers, + * since a big hole between dap and regular registers, + * we will restore them respectively. + */ +static int sgtl5000_restore_regs(struct snd_soc_codec *codec) +{ + u16 *cache = codec->reg_cache; + int i; + int regular_regs = SGTL5000_CHIP_SHORT_CTRL >> 1; + + /* restore regular registers */ + for (i = 0; i < regular_regs; i++) { + int reg = i << 1; + + /* this regs depends on the others */ + if (reg == SGTL5000_CHIP_ANA_POWER || + reg == SGTL5000_CHIP_CLK_CTRL || + reg == SGTL5000_CHIP_LINREG_CTRL || + reg == SGTL5000_CHIP_LINE_OUT_CTRL || + reg == SGTL5000_CHIP_CLK_CTRL) + continue; + + snd_soc_write(codec, reg, cache[i]); + } + + /* restore dap registers */ + for (i = SGTL5000_DAP_REG_OFFSET >> 1; + i < SGTL5000_MAX_REG_OFFSET >> 1; i++) { + int reg = i << 1; + + snd_soc_write(codec, reg, cache[i]); + } + + /* + * restore power and other regs according + * to set_power() and set_clock() + */ + snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL, + cache[SGTL5000_CHIP_LINREG_CTRL >> 1]); + + snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER, + cache[SGTL5000_CHIP_ANA_POWER >> 1]); + + snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL, + cache[SGTL5000_CHIP_CLK_CTRL >> 1]); + + snd_soc_write(codec, SGTL5000_CHIP_REF_CTRL, + cache[SGTL5000_CHIP_REF_CTRL >> 1]); + + snd_soc_write(codec, SGTL5000_CHIP_LINE_OUT_CTRL, + cache[SGTL5000_CHIP_LINE_OUT_CTRL >> 1]); + return 0; +} + +static int sgtl5000_resume(struct snd_soc_codec *codec) +{ + /* Bring the codec back up to standby to enable regulators */ + sgtl5000_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + /* Restore registers by cached in memory */ + sgtl5000_restore_regs(codec); + return 0; +} +#else +#define sgtl5000_suspend NULL +#define sgtl5000_resume NULL +#endif /* CONFIG_SUSPEND */ + +/* + * sgtl5000 has 3 internal power supplies: + * 1. VAG, normally set to vdda/2 + * 2. chargepump, set to different value + * according to voltage of vdda and vddio + * 3. line out VAG, normally set to vddio/2 + * + * and should be set according to: + * 1. vddd provided by external or not + * 2. vdda and vddio voltage value. > 3.1v or not + * 3. chip revision >=0x11 or not. If >=0x11, not use external vddd. + */ +static int sgtl5000_set_power_regs(struct snd_soc_codec *codec) +{ + int vddd; + int vdda; + int vddio; + u16 ana_pwr; + u16 lreg_ctrl; + int vag; + struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); + + vdda = regulator_get_voltage(sgtl5000->supplies[VDDA].consumer); + vddio = regulator_get_voltage(sgtl5000->supplies[VDDIO].consumer); + vddd = regulator_get_voltage(sgtl5000->supplies[VDDD].consumer); + + vdda = vdda / 1000; + vddio = vddio / 1000; + vddd = vddd / 1000; + + if (vdda <= 0 || vddio <= 0 || vddd < 0) { + dev_err(codec->dev, "regulator voltage not set correctly\n"); + + return -EINVAL; + } + + /* according to datasheet, maximum voltage of supplies */ + if (vdda > 3600 || vddio > 3600 || vddd > 1980) { + dev_err(codec->dev, + "exceed max voltage vdda %dmv vddio %dma vddd %dma\n", + vdda, vddio, vddd); + + return -EINVAL; + } + + /* reset value */ + ana_pwr = snd_soc_read(codec, SGTL5000_CHIP_ANA_POWER); + ana_pwr |= SGTL5000_DAC_STEREO | + SGTL5000_ADC_STEREO | + SGTL5000_REFTOP_POWERUP; + lreg_ctrl = snd_soc_read(codec, SGTL5000_CHIP_LINREG_CTRL); + + if (vddio < 3100 && vdda < 3100) { + /* enable internal oscillator used for charge pump */ + snd_soc_update_bits(codec, SGTL5000_CHIP_CLK_TOP_CTRL, + SGTL5000_INT_OSC_EN, + SGTL5000_INT_OSC_EN); + /* Enable VDDC charge pump */ + ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP; + } else if (vddio >= 3100 && vdda >= 3100) { + /* + * if vddio and vddd > 3.1v, + * charge pump should be clean before set ana_pwr + */ + snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, + SGTL5000_VDDC_CHRGPMP_POWERUP, 0); + + /* VDDC use VDDIO rail */ + lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD; + lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO << + SGTL5000_VDDC_MAN_ASSN_SHIFT; + } + + snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL, lreg_ctrl); + + snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER, ana_pwr); + + /* set voltage to register */ + snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL, + (0x1 << 4) - 1, 0x8); + + /* + * if vddd linear reg has been enabled, + * simple digital supply should be clear to get + * proper VDDD voltage. + */ + if (ana_pwr & SGTL5000_LINEREG_D_POWERUP) + snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, + SGTL5000_LINREG_SIMPLE_POWERUP, + 0); + else + snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, + SGTL5000_LINREG_SIMPLE_POWERUP | + SGTL5000_STARTUP_POWERUP, + 0); + + /* + * set ADC/DAC VAG to vdda / 2, + * should stay in range (0.8v, 1.575v) + */ + vag = vdda / 2; + if (vag <= SGTL5000_ANA_GND_BASE) + vag = 0; + else if (vag >= SGTL5000_ANA_GND_BASE + SGTL5000_ANA_GND_STP * + (SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT)) + vag = SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT; + else + vag = (vag - SGTL5000_ANA_GND_BASE) / SGTL5000_ANA_GND_STP; + + snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL, + vag << SGTL5000_ANA_GND_SHIFT, + vag << SGTL5000_ANA_GND_SHIFT); + + /* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */ + vag = vddio / 2; + if (vag <= SGTL5000_LINE_OUT_GND_BASE) + vag = 0; + else if (vag >= SGTL5000_LINE_OUT_GND_BASE + + SGTL5000_LINE_OUT_GND_STP * SGTL5000_LINE_OUT_GND_MAX) + vag = SGTL5000_LINE_OUT_GND_MAX; + else + vag = (vag - SGTL5000_LINE_OUT_GND_BASE) / + SGTL5000_LINE_OUT_GND_STP; + + snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_CTRL, + vag << SGTL5000_LINE_OUT_GND_SHIFT | + SGTL5000_LINE_OUT_CURRENT_360u << + SGTL5000_LINE_OUT_CURRENT_SHIFT, + vag << SGTL5000_LINE_OUT_GND_SHIFT | + SGTL5000_LINE_OUT_CURRENT_360u << + SGTL5000_LINE_OUT_CURRENT_SHIFT); + + return 0; +} + +static int sgtl5000_enable_regulators(struct snd_soc_codec *codec) +{ + u16 reg; + int ret; + int rev; + int i; + int external_vddd = 0; + struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); + + for (i = 0; i < ARRAY_SIZE(sgtl5000->supplies); i++) + sgtl5000->supplies[i].supply = supply_names[i]; + + ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(sgtl5000->supplies), + sgtl5000->supplies); + if (!ret) + external_vddd = 1; + else { + /* set internal ldo to 1.2v */ + int voltage = LDO_VOLTAGE; + + ret = ldo_regulator_register(codec, &ldo_init_data, voltage); + if (ret) { + dev_err(codec->dev, + "Failed to register vddd internal supplies: %d\n", + ret); + return ret; + } + + sgtl5000->supplies[VDDD].supply = LDO_CONSUMER_NAME; + + ret = regulator_bulk_get(codec->dev, + ARRAY_SIZE(sgtl5000->supplies), + sgtl5000->supplies); + + if (ret) { + ldo_regulator_remove(codec); + dev_err(codec->dev, + "Failed to request supplies: %d\n", ret); + + return ret; + } + } + + ret = regulator_bulk_enable(ARRAY_SIZE(sgtl5000->supplies), + sgtl5000->supplies); + if (ret) + goto err_regulator_free; + + /* wait for all power rails bring up */ + udelay(10); + + /* read chip information */ + reg = snd_soc_read(codec, SGTL5000_CHIP_ID); + if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) != + SGTL5000_PARTID_PART_ID) { + dev_err(codec->dev, + "Device with ID register %x is not a sgtl5000\n", reg); + ret = -ENODEV; + goto err_regulator_disable; + } + + rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT; + dev_info(codec->dev, "sgtl5000 revision %d\n", rev); + + /* + * workaround for revision 0x11 and later, + * roll back to use internal LDO + */ + if (external_vddd && rev >= 0x11) { + int voltage = LDO_VOLTAGE; + /* disable all regulator first */ + regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies), + sgtl5000->supplies); + /* free VDDD regulator */ + regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies), + sgtl5000->supplies); + + ret = ldo_regulator_register(codec, &ldo_init_data, voltage); + if (ret) + return ret; + + sgtl5000->supplies[VDDD].supply = LDO_CONSUMER_NAME; + + ret = regulator_bulk_get(codec->dev, + ARRAY_SIZE(sgtl5000->supplies), + sgtl5000->supplies); + if (ret) { + ldo_regulator_remove(codec); + dev_err(codec->dev, + "Failed to request supplies: %d\n", ret); + + return ret; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(sgtl5000->supplies), + sgtl5000->supplies); + if (ret) + goto err_regulator_free; + + /* wait for all power rails bring up */ + udelay(10); + } + + return 0; + +err_regulator_disable: + regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies), + sgtl5000->supplies); +err_regulator_free: + regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies), + sgtl5000->supplies); + if (external_vddd) + ldo_regulator_remove(codec); + return ret; + +} + +static int sgtl5000_probe(struct snd_soc_codec *codec) +{ + int ret; + struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); + + /* setup i2c data ops */ + ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_I2C); + if (ret < 0) { + dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); + return ret; + } + + ret = sgtl5000_enable_regulators(codec); + if (ret) + return ret; + + /* power up sgtl5000 */ + ret = sgtl5000_set_power_regs(codec); + if (ret) + goto err; + + /* enable small pop, introduce 400ms delay in turning off */ + snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL, + SGTL5000_SMALL_POP, + SGTL5000_SMALL_POP); + + /* disable short cut detector */ + snd_soc_write(codec, SGTL5000_CHIP_SHORT_CTRL, 0); + + /* + * set i2s as default input of sound switch + * TODO: add sound switch to control and dapm widge. + */ + snd_soc_write(codec, SGTL5000_CHIP_SSS_CTRL, + SGTL5000_DAC_SEL_I2S_IN << SGTL5000_DAC_SEL_SHIFT); + snd_soc_write(codec, SGTL5000_CHIP_DIG_POWER, + SGTL5000_ADC_EN | SGTL5000_DAC_EN); + + /* enable dac volume ramp by default */ + snd_soc_write(codec, SGTL5000_CHIP_ADCDAC_CTRL, + SGTL5000_DAC_VOL_RAMP_EN | + SGTL5000_DAC_MUTE_RIGHT | + SGTL5000_DAC_MUTE_LEFT); + + snd_soc_write(codec, SGTL5000_CHIP_PAD_STRENGTH, 0x015f); + + snd_soc_write(codec, SGTL5000_CHIP_ANA_CTRL, + SGTL5000_HP_ZCD_EN | + SGTL5000_ADC_ZCD_EN); + + snd_soc_write(codec, SGTL5000_CHIP_MIC_CTRL, 0); + + /* + * disable DAP + * TODO: + * Enable DAP in kcontrol and dapm. + */ + snd_soc_write(codec, SGTL5000_DAP_CTRL, 0); + + /* leading to standby state */ + ret = sgtl5000_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + if (ret) + goto err; + + snd_soc_add_controls(codec, sgtl5000_snd_controls, + ARRAY_SIZE(sgtl5000_snd_controls)); + + snd_soc_dapm_new_controls(&codec->dapm, sgtl5000_dapm_widgets, + ARRAY_SIZE(sgtl5000_dapm_widgets)); + + snd_soc_dapm_add_routes(&codec->dapm, audio_map, + ARRAY_SIZE(audio_map)); + + snd_soc_dapm_new_widgets(&codec->dapm); + + return 0; + +err: + regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies), + sgtl5000->supplies); + regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies), + sgtl5000->supplies); + ldo_regulator_remove(codec); + + return ret; +} + +static int sgtl5000_remove(struct snd_soc_codec *codec) +{ + struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); + + sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF); + + regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies), + sgtl5000->supplies); + regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies), + sgtl5000->supplies); + ldo_regulator_remove(codec); + + return 0; +} + +struct snd_soc_codec_driver sgtl5000_driver = { + .probe = sgtl5000_probe, + .remove = sgtl5000_remove, + .suspend = sgtl5000_suspend, + .resume = sgtl5000_resume, + .set_bias_level = sgtl5000_set_bias_level, + .reg_cache_size = ARRAY_SIZE(sgtl5000_regs), + .reg_word_size = sizeof(u16), + .reg_cache_step = 2, + .reg_cache_default = sgtl5000_regs, + .volatile_register = sgtl5000_volatile_register, +}; + +static __devinit int sgtl5000_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct sgtl5000_priv *sgtl5000; + int ret; + + sgtl5000 = kzalloc(sizeof(struct sgtl5000_priv), GFP_KERNEL); + if (!sgtl5000) + return -ENOMEM; + + /* + * copy DAP default values to default value array. + * sgtl5000 register space has a big hole, merge it + * at init phase makes life easy. + * FIXME: should we drop 'const' of sgtl5000_regs? + */ + memcpy((void *)(&sgtl5000_regs[0] + (SGTL5000_DAP_REG_OFFSET >> 1)), + sgtl5000_dap_regs, + SGTL5000_MAX_REG_OFFSET - SGTL5000_DAP_REG_OFFSET); + + i2c_set_clientdata(client, sgtl5000); + + ret = snd_soc_register_codec(&client->dev, + &sgtl5000_driver, &sgtl5000_dai, 1); + if (ret) { + dev_err(&client->dev, "Failed to register codec: %d\n", ret); + kfree(sgtl5000); + return ret; + } + + return 0; +} + +static __devexit int sgtl5000_i2c_remove(struct i2c_client *client) +{ + struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client); + + snd_soc_unregister_codec(&client->dev); + + kfree(sgtl5000); + return 0; +} + +static const struct i2c_device_id sgtl5000_id[] = { + {"sgtl5000", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, sgtl5000_id); + +static struct i2c_driver sgtl5000_i2c_driver = { + .driver = { + .name = "sgtl5000", + .owner = THIS_MODULE, + }, + .probe = sgtl5000_i2c_probe, + .remove = __devexit_p(sgtl5000_i2c_remove), + .id_table = sgtl5000_id, +}; + +static int __init sgtl5000_modinit(void) +{ + return i2c_add_driver(&sgtl5000_i2c_driver); +} +module_init(sgtl5000_modinit); + +static void __exit sgtl5000_exit(void) +{ + i2c_del_driver(&sgtl5000_i2c_driver); +} +module_exit(sgtl5000_exit); + +MODULE_DESCRIPTION("Freescale SGTL5000 ALSA SoC Codec Driver"); +MODULE_AUTHOR("Zeng Zhaoming "); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/sgtl5000.h b/sound/soc/codecs/sgtl5000.h new file mode 100644 index 000000000000..c29312ab8016 --- /dev/null +++ b/sound/soc/codecs/sgtl5000.h @@ -0,0 +1,402 @@ +/* + * sgtl5000.h - SGTL5000 audio codec interface + * + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _SGTL5000_H +#define _SGTL5000_H + +#include + +/* + * Register values. + */ +#define SGTL5000_CHIP_ID 0x0000 +#define SGTL5000_CHIP_DIG_POWER 0x0002 +#define SGTL5000_CHIP_CLK_CTRL 0x0004 +#define SGTL5000_CHIP_I2S_CTRL 0x0006 +#define SGTL5000_CHIP_SSS_CTRL 0x000a +#define SGTL5000_CHIP_ADCDAC_CTRL 0x000e +#define SGTL5000_CHIP_DAC_VOL 0x0010 +#define SGTL5000_CHIP_PAD_STRENGTH 0x0014 +#define SGTL5000_CHIP_ANA_ADC_CTRL 0x0020 +#define SGTL5000_CHIP_ANA_HP_CTRL 0x0022 +#define SGTL5000_CHIP_ANA_CTRL 0x0024 +#define SGTL5000_CHIP_LINREG_CTRL 0x0026 +#define SGTL5000_CHIP_REF_CTRL 0x0028 +#define SGTL5000_CHIP_MIC_CTRL 0x002a +#define SGTL5000_CHIP_LINE_OUT_CTRL 0x002c +#define SGTL5000_CHIP_LINE_OUT_VOL 0x002e +#define SGTL5000_CHIP_ANA_POWER 0x0030 +#define SGTL5000_CHIP_PLL_CTRL 0x0032 +#define SGTL5000_CHIP_CLK_TOP_CTRL 0x0034 +#define SGTL5000_CHIP_ANA_STATUS 0x0036 +#define SGTL5000_CHIP_SHORT_CTRL 0x003c +#define SGTL5000_CHIP_ANA_TEST2 0x003a +#define SGTL5000_DAP_CTRL 0x0100 +#define SGTL5000_DAP_PEQ 0x0102 +#define SGTL5000_DAP_BASS_ENHANCE 0x0104 +#define SGTL5000_DAP_BASS_ENHANCE_CTRL 0x0106 +#define SGTL5000_DAP_AUDIO_EQ 0x0108 +#define SGTL5000_DAP_SURROUND 0x010a +#define SGTL5000_DAP_FLT_COEF_ACCESS 0x010c +#define SGTL5000_DAP_COEF_WR_B0_MSB 0x010e +#define SGTL5000_DAP_COEF_WR_B0_LSB 0x0110 +#define SGTL5000_DAP_EQ_BASS_BAND0 0x0116 +#define SGTL5000_DAP_EQ_BASS_BAND1 0x0118 +#define SGTL5000_DAP_EQ_BASS_BAND2 0x011a +#define SGTL5000_DAP_EQ_BASS_BAND3 0x011c +#define SGTL5000_DAP_EQ_BASS_BAND4 0x011e +#define SGTL5000_DAP_MAIN_CHAN 0x0120 +#define SGTL5000_DAP_MIX_CHAN 0x0122 +#define SGTL5000_DAP_AVC_CTRL 0x0124 +#define SGTL5000_DAP_AVC_THRESHOLD 0x0126 +#define SGTL5000_DAP_AVC_ATTACK 0x0128 +#define SGTL5000_DAP_AVC_DECAY 0x012a +#define SGTL5000_DAP_COEF_WR_B1_MSB 0x012c +#define SGTL5000_DAP_COEF_WR_B1_LSB 0x012e +#define SGTL5000_DAP_COEF_WR_B2_MSB 0x0130 +#define SGTL5000_DAP_COEF_WR_B2_LSB 0x0132 +#define SGTL5000_DAP_COEF_WR_A1_MSB 0x0134 +#define SGTL5000_DAP_COEF_WR_A1_LSB 0x0136 +#define SGTL5000_DAP_COEF_WR_A2_MSB 0x0138 +#define SGTL5000_DAP_COEF_WR_A2_LSB 0x013a + +/* + * Field Definitions. + */ + +/* + * SGTL5000_CHIP_ID + */ +#define SGTL5000_PARTID_MASK 0xff00 +#define SGTL5000_PARTID_SHIFT 8 +#define SGTL5000_PARTID_WIDTH 8 +#define SGTL5000_PARTID_PART_ID 0xa0 +#define SGTL5000_REVID_MASK 0x00ff +#define SGTL5000_REVID_SHIFT 0 +#define SGTL5000_REVID_WIDTH 8 + +/* + * SGTL5000_CHIP_DIG_POWER + */ +#define SGTL5000_ADC_EN 0x0040 +#define SGTL5000_DAC_EN 0x0020 +#define SGTL5000_DAP_POWERUP 0x0010 +#define SGTL5000_I2S_OUT_POWERUP 0x0002 +#define SGTL5000_I2S_IN_POWERUP 0x0001 + +/* + * SGTL5000_CHIP_CLK_CTRL + */ +#define SGTL5000_RATE_MODE_MASK 0x0030 +#define SGTL5000_RATE_MODE_SHIFT 4 +#define SGTL5000_RATE_MODE_WIDTH 2 +#define SGTL5000_RATE_MODE_DIV_1 0 +#define SGTL5000_RATE_MODE_DIV_2 1 +#define SGTL5000_RATE_MODE_DIV_4 2 +#define SGTL5000_RATE_MODE_DIV_6 3 +#define SGTL5000_SYS_FS_MASK 0x000c +#define SGTL5000_SYS_FS_SHIFT 2 +#define SGTL5000_SYS_FS_WIDTH 2 +#define SGTL5000_SYS_FS_32k 0x0 +#define SGTL5000_SYS_FS_44_1k 0x1 +#define SGTL5000_SYS_FS_48k 0x2 +#define SGTL5000_SYS_FS_96k 0x3 +#define SGTL5000_MCLK_FREQ_MASK 0x0003 +#define SGTL5000_MCLK_FREQ_SHIFT 0 +#define SGTL5000_MCLK_FREQ_WIDTH 2 +#define SGTL5000_MCLK_FREQ_256FS 0x0 +#define SGTL5000_MCLK_FREQ_384FS 0x1 +#define SGTL5000_MCLK_FREQ_512FS 0x2 +#define SGTL5000_MCLK_FREQ_PLL 0x3 + +/* + * SGTL5000_CHIP_I2S_CTRL + */ +#define SGTL5000_I2S_SCLKFREQ_MASK 0x0100 +#define SGTL5000_I2S_SCLKFREQ_SHIFT 8 +#define SGTL5000_I2S_SCLKFREQ_WIDTH 1 +#define SGTL5000_I2S_SCLKFREQ_64FS 0x0 +#define SGTL5000_I2S_SCLKFREQ_32FS 0x1 /* Not for RJ mode */ +#define SGTL5000_I2S_MASTER 0x0080 +#define SGTL5000_I2S_SCLK_INV 0x0040 +#define SGTL5000_I2S_DLEN_MASK 0x0030 +#define SGTL5000_I2S_DLEN_SHIFT 4 +#define SGTL5000_I2S_DLEN_WIDTH 2 +#define SGTL5000_I2S_DLEN_32 0x0 +#define SGTL5000_I2S_DLEN_24 0x1 +#define SGTL5000_I2S_DLEN_20 0x2 +#define SGTL5000_I2S_DLEN_16 0x3 +#define SGTL5000_I2S_MODE_MASK 0x000c +#define SGTL5000_I2S_MODE_SHIFT 2 +#define SGTL5000_I2S_MODE_WIDTH 2 +#define SGTL5000_I2S_MODE_I2S_LJ 0x0 +#define SGTL5000_I2S_MODE_RJ 0x1 +#define SGTL5000_I2S_MODE_PCM 0x2 +#define SGTL5000_I2S_LRALIGN 0x0002 +#define SGTL5000_I2S_LRPOL 0x0001 /* set for which mode */ + +/* + * SGTL5000_CHIP_SSS_CTRL + */ +#define SGTL5000_DAP_MIX_LRSWAP 0x4000 +#define SGTL5000_DAP_LRSWAP 0x2000 +#define SGTL5000_DAC_LRSWAP 0x1000 +#define SGTL5000_I2S_OUT_LRSWAP 0x0400 +#define SGTL5000_DAP_MIX_SEL_MASK 0x0300 +#define SGTL5000_DAP_MIX_SEL_SHIFT 8 +#define SGTL5000_DAP_MIX_SEL_WIDTH 2 +#define SGTL5000_DAP_MIX_SEL_ADC 0x0 +#define SGTL5000_DAP_MIX_SEL_I2S_IN 0x1 +#define SGTL5000_DAP_SEL_MASK 0x00c0 +#define SGTL5000_DAP_SEL_SHIFT 6 +#define SGTL5000_DAP_SEL_WIDTH 2 +#define SGTL5000_DAP_SEL_ADC 0x0 +#define SGTL5000_DAP_SEL_I2S_IN 0x1 +#define SGTL5000_DAC_SEL_MASK 0x0030 +#define SGTL5000_DAC_SEL_SHIFT 4 +#define SGTL5000_DAC_SEL_WIDTH 2 +#define SGTL5000_DAC_SEL_ADC 0x0 +#define SGTL5000_DAC_SEL_I2S_IN 0x1 +#define SGTL5000_DAC_SEL_DAP 0x3 +#define SGTL5000_I2S_OUT_SEL_MASK 0x0003 +#define SGTL5000_I2S_OUT_SEL_SHIFT 0 +#define SGTL5000_I2S_OUT_SEL_WIDTH 2 +#define SGTL5000_I2S_OUT_SEL_ADC 0x0 +#define SGTL5000_I2S_OUT_SEL_I2S_IN 0x1 +#define SGTL5000_I2S_OUT_SEL_DAP 0x3 + +/* + * SGTL5000_CHIP_ADCDAC_CTRL + */ +#define SGTL5000_VOL_BUSY_DAC_RIGHT 0x2000 +#define SGTL5000_VOL_BUSY_DAC_LEFT 0x1000 +#define SGTL5000_DAC_VOL_RAMP_EN 0x0200 +#define SGTL5000_DAC_VOL_RAMP_EXPO 0x0100 +#define SGTL5000_DAC_MUTE_RIGHT 0x0008 +#define SGTL5000_DAC_MUTE_LEFT 0x0004 +#define SGTL5000_ADC_HPF_FREEZE 0x0002 +#define SGTL5000_ADC_HPF_BYPASS 0x0001 + +/* + * SGTL5000_CHIP_DAC_VOL + */ +#define SGTL5000_DAC_VOL_RIGHT_MASK 0xff00 +#define SGTL5000_DAC_VOL_RIGHT_SHIFT 8 +#define SGTL5000_DAC_VOL_RIGHT_WIDTH 8 +#define SGTL5000_DAC_VOL_LEFT_MASK 0x00ff +#define SGTL5000_DAC_VOL_LEFT_SHIFT 0 +#define SGTL5000_DAC_VOL_LEFT_WIDTH 8 + +/* + * SGTL5000_CHIP_PAD_STRENGTH + */ +#define SGTL5000_PAD_I2S_LRCLK_MASK 0x0300 +#define SGTL5000_PAD_I2S_LRCLK_SHIFT 8 +#define SGTL5000_PAD_I2S_LRCLK_WIDTH 2 +#define SGTL5000_PAD_I2S_SCLK_MASK 0x00c0 +#define SGTL5000_PAD_I2S_SCLK_SHIFT 6 +#define SGTL5000_PAD_I2S_SCLK_WIDTH 2 +#define SGTL5000_PAD_I2S_DOUT_MASK 0x0030 +#define SGTL5000_PAD_I2S_DOUT_SHIFT 4 +#define SGTL5000_PAD_I2S_DOUT_WIDTH 2 +#define SGTL5000_PAD_I2C_SDA_MASK 0x000c +#define SGTL5000_PAD_I2C_SDA_SHIFT 2 +#define SGTL5000_PAD_I2C_SDA_WIDTH 2 +#define SGTL5000_PAD_I2C_SCL_MASK 0x0003 +#define SGTL5000_PAD_I2C_SCL_SHIFT 0 +#define SGTL5000_PAD_I2C_SCL_WIDTH 2 + +/* + * SGTL5000_CHIP_ANA_ADC_CTRL + */ +#define SGTL5000_ADC_VOL_M6DB 0x0100 +#define SGTL5000_ADC_VOL_RIGHT_MASK 0x00f0 +#define SGTL5000_ADC_VOL_RIGHT_SHIFT 4 +#define SGTL5000_ADC_VOL_RIGHT_WIDTH 4 +#define SGTL5000_ADC_VOL_LEFT_MASK 0x000f +#define SGTL5000_ADC_VOL_LEFT_SHIFT 0 +#define SGTL5000_ADC_VOL_LEFT_WIDTH 4 + +/* + * SGTL5000_CHIP_ANA_HP_CTRL + */ +#define SGTL5000_HP_VOL_RIGHT_MASK 0x7f00 +#define SGTL5000_HP_VOL_RIGHT_SHIFT 8 +#define SGTL5000_HP_VOL_RIGHT_WIDTH 7 +#define SGTL5000_HP_VOL_LEFT_MASK 0x007f +#define SGTL5000_HP_VOL_LEFT_SHIFT 0 +#define SGTL5000_HP_VOL_LEFT_WIDTH 7 + +/* + * SGTL5000_CHIP_ANA_CTRL + */ +#define SGTL5000_LINE_OUT_MUTE 0x0100 +#define SGTL5000_HP_SEL_MASK 0x0040 +#define SGTL5000_HP_SEL_SHIFT 6 +#define SGTL5000_HP_SEL_WIDTH 1 +#define SGTL5000_HP_SEL_DAC 0x0 +#define SGTL5000_HP_SEL_LINE_IN 0x1 +#define SGTL5000_HP_ZCD_EN 0x0020 +#define SGTL5000_HP_MUTE 0x0010 +#define SGTL5000_ADC_SEL_MASK 0x0004 +#define SGTL5000_ADC_SEL_SHIFT 2 +#define SGTL5000_ADC_SEL_WIDTH 1 +#define SGTL5000_ADC_SEL_MIC 0x0 +#define SGTL5000_ADC_SEL_LINE_IN 0x1 +#define SGTL5000_ADC_ZCD_EN 0x0002 +#define SGTL5000_ADC_MUTE 0x0001 + +/* + * SGTL5000_CHIP_LINREG_CTRL + */ +#define SGTL5000_VDDC_MAN_ASSN_MASK 0x0040 +#define SGTL5000_VDDC_MAN_ASSN_SHIFT 6 +#define SGTL5000_VDDC_MAN_ASSN_WIDTH 1 +#define SGTL5000_VDDC_MAN_ASSN_VDDA 0x0 +#define SGTL5000_VDDC_MAN_ASSN_VDDIO 0x1 +#define SGTL5000_VDDC_ASSN_OVRD 0x0020 +#define SGTL5000_LINREG_VDDD_MASK 0x000f +#define SGTL5000_LINREG_VDDD_SHIFT 0 +#define SGTL5000_LINREG_VDDD_WIDTH 4 + +/* + * SGTL5000_CHIP_REF_CTRL + */ +#define SGTL5000_ANA_GND_MASK 0x01f0 +#define SGTL5000_ANA_GND_SHIFT 4 +#define SGTL5000_ANA_GND_WIDTH 5 +#define SGTL5000_ANA_GND_BASE 800 /* mv */ +#define SGTL5000_ANA_GND_STP 25 /*mv */ +#define SGTL5000_BIAS_CTRL_MASK 0x000e +#define SGTL5000_BIAS_CTRL_SHIFT 1 +#define SGTL5000_BIAS_CTRL_WIDTH 3 +#define SGTL5000_SMALL_POP 0x0001 + +/* + * SGTL5000_CHIP_MIC_CTRL + */ +#define SGTL5000_BIAS_R_MASK 0x0200 +#define SGTL5000_BIAS_R_SHIFT 8 +#define SGTL5000_BIAS_R_WIDTH 2 +#define SGTL5000_BIAS_R_off 0x0 +#define SGTL5000_BIAS_R_2K 0x1 +#define SGTL5000_BIAS_R_4k 0x2 +#define SGTL5000_BIAS_R_8k 0x3 +#define SGTL5000_BIAS_VOLT_MASK 0x0070 +#define SGTL5000_BIAS_VOLT_SHIFT 4 +#define SGTL5000_BIAS_VOLT_WIDTH 3 +#define SGTL5000_MIC_GAIN_MASK 0x0003 +#define SGTL5000_MIC_GAIN_SHIFT 0 +#define SGTL5000_MIC_GAIN_WIDTH 2 + +/* + * SGTL5000_CHIP_LINE_OUT_CTRL + */ +#define SGTL5000_LINE_OUT_CURRENT_MASK 0x0f00 +#define SGTL5000_LINE_OUT_CURRENT_SHIFT 8 +#define SGTL5000_LINE_OUT_CURRENT_WIDTH 4 +#define SGTL5000_LINE_OUT_CURRENT_180u 0x0 +#define SGTL5000_LINE_OUT_CURRENT_270u 0x1 +#define SGTL5000_LINE_OUT_CURRENT_360u 0x3 +#define SGTL5000_LINE_OUT_CURRENT_450u 0x7 +#define SGTL5000_LINE_OUT_CURRENT_540u 0xf +#define SGTL5000_LINE_OUT_GND_MASK 0x003f +#define SGTL5000_LINE_OUT_GND_SHIFT 0 +#define SGTL5000_LINE_OUT_GND_WIDTH 6 +#define SGTL5000_LINE_OUT_GND_BASE 800 /* mv */ +#define SGTL5000_LINE_OUT_GND_STP 25 +#define SGTL5000_LINE_OUT_GND_MAX 0x23 + +/* + * SGTL5000_CHIP_LINE_OUT_VOL + */ +#define SGTL5000_LINE_OUT_VOL_RIGHT_MASK 0x1f00 +#define SGTL5000_LINE_OUT_VOL_RIGHT_SHIFT 8 +#define SGTL5000_LINE_OUT_VOL_RIGHT_WIDTH 5 +#define SGTL5000_LINE_OUT_VOL_LEFT_MASK 0x001f +#define SGTL5000_LINE_OUT_VOL_LEFT_SHIFT 0 +#define SGTL5000_LINE_OUT_VOL_LEFT_WIDTH 5 + +/* + * SGTL5000_CHIP_ANA_POWER + */ +#define SGTL5000_DAC_STEREO 0x4000 +#define SGTL5000_LINREG_SIMPLE_POWERUP 0x2000 +#define SGTL5000_STARTUP_POWERUP 0x1000 +#define SGTL5000_VDDC_CHRGPMP_POWERUP 0x0800 +#define SGTL5000_PLL_POWERUP 0x0400 +#define SGTL5000_LINEREG_D_POWERUP 0x0200 +#define SGTL5000_VCOAMP_POWERUP 0x0100 +#define SGTL5000_VAG_POWERUP 0x0080 +#define SGTL5000_ADC_STEREO 0x0040 +#define SGTL5000_REFTOP_POWERUP 0x0020 +#define SGTL5000_HP_POWERUP 0x0010 +#define SGTL5000_DAC_POWERUP 0x0008 +#define SGTL5000_CAPLESS_HP_POWERUP 0x0004 +#define SGTL5000_ADC_POWERUP 0x0002 +#define SGTL5000_LINE_OUT_POWERUP 0x0001 + +/* + * SGTL5000_CHIP_PLL_CTRL + */ +#define SGTL5000_PLL_INT_DIV_MASK 0xf800 +#define SGTL5000_PLL_INT_DIV_SHIFT 11 +#define SGTL5000_PLL_INT_DIV_WIDTH 5 +#define SGTL5000_PLL_FRAC_DIV_MASK 0x0700 +#define SGTL5000_PLL_FRAC_DIV_SHIFT 0 +#define SGTL5000_PLL_FRAC_DIV_WIDTH 11 + +/* + * SGTL5000_CHIP_CLK_TOP_CTRL + */ +#define SGTL5000_INT_OSC_EN 0x0800 +#define SGTL5000_INPUT_FREQ_DIV2 0x0008 + +/* + * SGTL5000_CHIP_ANA_STATUS + */ +#define SGTL5000_HP_LRSHORT 0x0200 +#define SGTL5000_CAPLESS_SHORT 0x0100 +#define SGTL5000_PLL_LOCKED 0x0010 + +/* + * SGTL5000_CHIP_SHORT_CTRL + */ +#define SGTL5000_LVLADJR_MASK 0x7000 +#define SGTL5000_LVLADJR_SHIFT 12 +#define SGTL5000_LVLADJR_WIDTH 3 +#define SGTL5000_LVLADJL_MASK 0x0700 +#define SGTL5000_LVLADJL_SHIFT 8 +#define SGTL5000_LVLADJL_WIDTH 3 +#define SGTL5000_LVLADJC_MASK 0x0070 +#define SGTL5000_LVLADJC_SHIFT 4 +#define SGTL5000_LVLADJC_WIDTH 3 +#define SGTL5000_LR_SHORT_MOD_MASK 0x000c +#define SGTL5000_LR_SHORT_MOD_SHIFT 2 +#define SGTL5000_LR_SHORT_MOD_WIDTH 2 +#define SGTL5000_CM_SHORT_MOD_MASK 0x0003 +#define SGTL5000_CM_SHORT_MOD_SHIFT 0 +#define SGTL5000_CM_SHORT_MOD_WIDTH 2 + +/* + *SGTL5000_CHIP_ANA_TEST2 + */ +#define SGTL5000_MONO_DAC 0x1000 + +/* + * SGTL5000_DAP_CTRL + */ +#define SGTL5000_DAP_MIX_EN 0x0010 +#define SGTL5000_DAP_EN 0x0001 + +#define SGTL5000_SYSCLK 0x00 +#define SGTL5000_LRCLK 0x01 + +#endif -- 2.39.5