From 9dc367bc4c76cc4c6595e9fab6a5a02523b537c6 Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Tue, 8 Nov 2011 09:54:25 +0000 Subject: [PATCH] Driver for GE PIO2 VME Card This patch implements a driver for the GE PIO2 VME Parallel I/O Card. This card is a 6U VME Card, implementing 32 solid-state relay switched IO lines, in 4 groups of 8. Each bank of IO lines is built to function as input, output or both depending on the variant of the card. Signed-off-by: Martyn Welch Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vme/devices/Kconfig | 12 + drivers/staging/vme/devices/Makefile | 3 + drivers/staging/vme/devices/vme_pio2.h | 249 ++++++++++ drivers/staging/vme/devices/vme_pio2_cntr.c | 71 +++ drivers/staging/vme/devices/vme_pio2_core.c | 524 ++++++++++++++++++++ drivers/staging/vme/devices/vme_pio2_gpio.c | 227 +++++++++ 6 files changed, 1086 insertions(+) create mode 100644 drivers/staging/vme/devices/vme_pio2.h create mode 100644 drivers/staging/vme/devices/vme_pio2_cntr.c create mode 100644 drivers/staging/vme/devices/vme_pio2_core.c create mode 100644 drivers/staging/vme/devices/vme_pio2_gpio.c diff --git a/drivers/staging/vme/devices/Kconfig b/drivers/staging/vme/devices/Kconfig index ca5ba89e2d8c..8f5d286071d1 100644 --- a/drivers/staging/vme/devices/Kconfig +++ b/drivers/staging/vme/devices/Kconfig @@ -6,3 +6,15 @@ config VME_USER If you say Y here you want to be able to access a limited number of VME windows in a manner at least semi-compatible with the interface provided with the original driver at http://vmelinux.org/. + +config VME_PIO2 + tristate "GE PIO2 VME" + help + Say Y here to include support for the GE PIO2. The PIO2 is a 6U VME + slave card, implementing 32 solid-state relay switched IO lines, in + 4 groups of 8. Each bank of IO lines is built to function as input, + output or both depending on the variant of the card. + + To compile this driver as a module, choose M here. The module will + be called vme_pio2. If unsure, say N. + diff --git a/drivers/staging/vme/devices/Makefile b/drivers/staging/vme/devices/Makefile index 459742a75283..172512cb5dbf 100644 --- a/drivers/staging/vme/devices/Makefile +++ b/drivers/staging/vme/devices/Makefile @@ -3,3 +3,6 @@ # obj-$(CONFIG_VME_USER) += vme_user.o + +vme_pio2-objs := vme_pio2_cntr.o vme_pio2_gpio.o vme_pio2_core.o +obj-$(CONFIG_VME_PIO2) += vme_pio2.o diff --git a/drivers/staging/vme/devices/vme_pio2.h b/drivers/staging/vme/devices/vme_pio2.h new file mode 100644 index 000000000000..3c5931364535 --- /dev/null +++ b/drivers/staging/vme/devices/vme_pio2.h @@ -0,0 +1,249 @@ +#ifndef _VME_PIO2_H_ +#define _VME_PIO2_H_ + +#define PIO2_CARDS_MAX 32 + +#define PIO2_VARIANT_LENGTH 5 + +#define PIO2_NUM_CHANNELS 32 +#define PIO2_NUM_IRQS 11 +#define PIO2_NUM_CNTRS 6 + +#define PIO2_REGS_SIZE 0x40 + +#define PIO2_REGS_DATA0 0x0 +#define PIO2_REGS_DATA1 0x1 +#define PIO2_REGS_DATA2 0x2 +#define PIO2_REGS_DATA3 0x3 + +static const int PIO2_REGS_DATA[4] = { PIO2_REGS_DATA0, PIO2_REGS_DATA1, + PIO2_REGS_DATA2, PIO2_REGS_DATA3 }; + +#define PIO2_REGS_INT_STAT0 0x8 +#define PIO2_REGS_INT_STAT1 0x9 +#define PIO2_REGS_INT_STAT2 0xa +#define PIO2_REGS_INT_STAT3 0xb + +static const int PIO2_REGS_INT_STAT[4] = { PIO2_REGS_INT_STAT0, + PIO2_REGS_INT_STAT1, + PIO2_REGS_INT_STAT2, + PIO2_REGS_INT_STAT3 }; + +#define PIO2_REGS_INT_STAT_CNTR 0xc +#define PIO2_REGS_INT_MASK0 0x10 +#define PIO2_REGS_INT_MASK1 0x11 +#define PIO2_REGS_INT_MASK2 0x12 +#define PIO2_REGS_INT_MASK3 0x13 +#define PIO2_REGS_INT_MASK4 0x14 +#define PIO2_REGS_INT_MASK5 0x15 +#define PIO2_REGS_INT_MASK6 0x16 +#define PIO2_REGS_INT_MASK7 0x17 + +static const int PIO2_REGS_INT_MASK[8] = { PIO2_REGS_INT_MASK0, + PIO2_REGS_INT_MASK1, + PIO2_REGS_INT_MASK2, + PIO2_REGS_INT_MASK3, + PIO2_REGS_INT_MASK4, + PIO2_REGS_INT_MASK5, + PIO2_REGS_INT_MASK6, + PIO2_REGS_INT_MASK7 }; + + + +#define PIO2_REGS_CTRL 0x18 +#define PIO2_REGS_VME_VECTOR 0x19 +#define PIO2_REGS_CNTR0 0x20 +#define PIO2_REGS_CNTR1 0x22 +#define PIO2_REGS_CNTR2 0x24 +#define PIO2_REGS_CTRL_WRD0 0x26 +#define PIO2_REGS_CNTR3 0x28 +#define PIO2_REGS_CNTR4 0x2a +#define PIO2_REGS_CNTR5 0x2c +#define PIO2_REGS_CTRL_WRD1 0x2e + +#define PIO2_REGS_ID 0x30 + + +/* PIO2_REGS_DATAx (0x0 - 0x3) */ + +static const int PIO2_CHANNEL_BANK[32] = { 0, 0, 0, 0, 0, 0, 0, 0, + 1, 1, 1, 1, 1, 1, 1, 1, + 2, 2, 2, 2, 2, 2, 2, 2, + 3, 3, 3, 3, 3, 3, 3, 3 }; + +#define PIO2_CHANNEL0_BIT (1 << 0) +#define PIO2_CHANNEL1_BIT (1 << 1) +#define PIO2_CHANNEL2_BIT (1 << 2) +#define PIO2_CHANNEL3_BIT (1 << 3) +#define PIO2_CHANNEL4_BIT (1 << 4) +#define PIO2_CHANNEL5_BIT (1 << 5) +#define PIO2_CHANNEL6_BIT (1 << 6) +#define PIO2_CHANNEL7_BIT (1 << 7) +#define PIO2_CHANNEL8_BIT (1 << 0) +#define PIO2_CHANNEL9_BIT (1 << 1) +#define PIO2_CHANNEL10_BIT (1 << 2) +#define PIO2_CHANNEL11_BIT (1 << 3) +#define PIO2_CHANNEL12_BIT (1 << 4) +#define PIO2_CHANNEL13_BIT (1 << 5) +#define PIO2_CHANNEL14_BIT (1 << 6) +#define PIO2_CHANNEL15_BIT (1 << 7) +#define PIO2_CHANNEL16_BIT (1 << 0) +#define PIO2_CHANNEL17_BIT (1 << 1) +#define PIO2_CHANNEL18_BIT (1 << 2) +#define PIO2_CHANNEL19_BIT (1 << 3) +#define PIO2_CHANNEL20_BIT (1 << 4) +#define PIO2_CHANNEL21_BIT (1 << 5) +#define PIO2_CHANNEL22_BIT (1 << 6) +#define PIO2_CHANNEL23_BIT (1 << 7) +#define PIO2_CHANNEL24_BIT (1 << 0) +#define PIO2_CHANNEL25_BIT (1 << 1) +#define PIO2_CHANNEL26_BIT (1 << 2) +#define PIO2_CHANNEL27_BIT (1 << 3) +#define PIO2_CHANNEL28_BIT (1 << 4) +#define PIO2_CHANNEL29_BIT (1 << 5) +#define PIO2_CHANNEL30_BIT (1 << 6) +#define PIO2_CHANNEL31_BIT (1 << 7) + +static const int PIO2_CHANNEL_BIT[32] = { PIO2_CHANNEL0_BIT, PIO2_CHANNEL1_BIT, + PIO2_CHANNEL2_BIT, PIO2_CHANNEL3_BIT, + PIO2_CHANNEL4_BIT, PIO2_CHANNEL5_BIT, + PIO2_CHANNEL6_BIT, PIO2_CHANNEL7_BIT, + PIO2_CHANNEL8_BIT, PIO2_CHANNEL9_BIT, + PIO2_CHANNEL10_BIT, PIO2_CHANNEL11_BIT, + PIO2_CHANNEL12_BIT, PIO2_CHANNEL13_BIT, + PIO2_CHANNEL14_BIT, PIO2_CHANNEL15_BIT, + PIO2_CHANNEL16_BIT, PIO2_CHANNEL17_BIT, + PIO2_CHANNEL18_BIT, PIO2_CHANNEL19_BIT, + PIO2_CHANNEL20_BIT, PIO2_CHANNEL21_BIT, + PIO2_CHANNEL22_BIT, PIO2_CHANNEL23_BIT, + PIO2_CHANNEL24_BIT, PIO2_CHANNEL25_BIT, + PIO2_CHANNEL26_BIT, PIO2_CHANNEL27_BIT, + PIO2_CHANNEL28_BIT, PIO2_CHANNEL29_BIT, + PIO2_CHANNEL30_BIT, PIO2_CHANNEL31_BIT + }; + +/* PIO2_REGS_INT_STAT_CNTR (0xc) */ +#define PIO2_COUNTER0 (1 << 0) +#define PIO2_COUNTER1 (1 << 1) +#define PIO2_COUNTER2 (1 << 2) +#define PIO2_COUNTER3 (1 << 3) +#define PIO2_COUNTER4 (1 << 4) +#define PIO2_COUNTER5 (1 << 5) + +static const int PIO2_COUNTER[6] = { PIO2_COUNTER0, PIO2_COUNTER1, + PIO2_COUNTER2, PIO2_COUNTER3, + PIO2_COUNTER4, PIO2_COUNTER5 }; + +/* PIO2_REGS_CTRL (0x18) */ +#define PIO2_VME_INT_MASK 0x7 +#define PIO2_LED (1 << 6) +#define PIO2_LOOP (1 << 7) + +/* PIO2_REGS_VME_VECTOR (0x19) */ +#define PIO2_VME_VECTOR_SPUR 0x0 +#define PIO2_VME_VECTOR_BANK0 0x1 +#define PIO2_VME_VECTOR_BANK1 0x2 +#define PIO2_VME_VECTOR_BANK2 0x3 +#define PIO2_VME_VECTOR_BANK3 0x4 +#define PIO2_VME_VECTOR_CNTR0 0x5 +#define PIO2_VME_VECTOR_CNTR1 0x6 +#define PIO2_VME_VECTOR_CNTR2 0x7 +#define PIO2_VME_VECTOR_CNTR3 0x8 +#define PIO2_VME_VECTOR_CNTR4 0x9 +#define PIO2_VME_VECTOR_CNTR5 0xa + +#define PIO2_VME_VECTOR_MASK 0xf0 + +static const int PIO2_VECTOR_BANK[4] = { PIO2_VME_VECTOR_BANK0, + PIO2_VME_VECTOR_BANK1, + PIO2_VME_VECTOR_BANK2, + PIO2_VME_VECTOR_BANK3 }; + +static const int PIO2_VECTOR_CNTR[6] = { PIO2_VME_VECTOR_CNTR0, + PIO2_VME_VECTOR_CNTR1, + PIO2_VME_VECTOR_CNTR2, + PIO2_VME_VECTOR_CNTR3, + PIO2_VME_VECTOR_CNTR4, + PIO2_VME_VECTOR_CNTR5 }; + +/* PIO2_REGS_CNTRx (0x20 - 0x24 & 0x28 - 0x2c) */ + +static const int PIO2_CNTR_DATA[6] = { PIO2_REGS_CNTR0, PIO2_REGS_CNTR1, + PIO2_REGS_CNTR2, PIO2_REGS_CNTR3, + PIO2_REGS_CNTR4, PIO2_REGS_CNTR5 }; + +/* PIO2_REGS_CTRL_WRDx (0x26 & 0x2e) */ + +static const int PIO2_CNTR_CTRL[6] = { PIO2_REGS_CTRL_WRD0, + PIO2_REGS_CTRL_WRD0, + PIO2_REGS_CTRL_WRD0, + PIO2_REGS_CTRL_WRD1, + PIO2_REGS_CTRL_WRD1, + PIO2_REGS_CTRL_WRD1 }; + +#define PIO2_CNTR_SC_DEV0 0 +#define PIO2_CNTR_SC_DEV1 (1 << 6) +#define PIO2_CNTR_SC_DEV2 (2 << 6) +#define PIO2_CNTR_SC_RDBACK (3 << 6) + +static const int PIO2_CNTR_SC_DEV[6] = { PIO2_CNTR_SC_DEV0, PIO2_CNTR_SC_DEV1, + PIO2_CNTR_SC_DEV2, PIO2_CNTR_SC_DEV0, + PIO2_CNTR_SC_DEV1, PIO2_CNTR_SC_DEV2 }; + +#define PIO2_CNTR_RW_LATCH 0 +#define PIO2_CNTR_RW_LSB (1 << 4) +#define PIO2_CNTR_RW_MSB (2 << 4) +#define PIO2_CNTR_RW_BOTH (3 << 4) + +#define PIO2_CNTR_MODE0 0 +#define PIO2_CNTR_MODE1 (1 << 1) +#define PIO2_CNTR_MODE2 (2 << 1) +#define PIO2_CNTR_MODE3 (3 << 1) +#define PIO2_CNTR_MODE4 (4 << 1) +#define PIO2_CNTR_MODE5 (5 << 1) + +#define PIO2_CNTR_BCD 1 + + + +enum pio2_bank_config { NOFIT, INPUT, OUTPUT, BOTH }; +enum pio2_int_config { NONE = 0, LOW2HIGH = 1, HIGH2LOW = 2, EITHER = 4 }; + +/* Bank configuration structure */ +struct pio2_io_bank { + enum pio2_bank_config config; + u8 value; + enum pio2_int_config irq[8]; +}; + +/* Counter configuration structure */ +struct pio2_cntr { + int mode; + int count; +}; + +struct pio2_card { + int id; + int bus; + long base; + int irq_vector; + int irq_level; + char variant[6]; + int led; + + struct vme_dev *vdev; + struct vme_resource *window; + + struct gpio_chip gc; + struct pio2_io_bank bank[4]; + + struct pio2_cntr cntr[6]; +}; + +int pio2_cntr_reset(struct pio2_card *); + +int pio2_gpio_reset(struct pio2_card *); +int __init pio2_gpio_init(struct pio2_card *); +void __exit pio2_gpio_exit(struct pio2_card *); + +#endif /* _VME_PIO2_H_ */ diff --git a/drivers/staging/vme/devices/vme_pio2_cntr.c b/drivers/staging/vme/devices/vme_pio2_cntr.c new file mode 100644 index 000000000000..08e0d59806ca --- /dev/null +++ b/drivers/staging/vme/devices/vme_pio2_cntr.c @@ -0,0 +1,71 @@ +/* + * GE PIO2 Counter Driver + * + * Author: Martyn Welch + * Copyright 2009 GE Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * The PIO-2 has 6 counters, currently this code just disables the interrupts + * and leaves them alone. + * + */ + +#include +#include +#include + +#include "../vme.h" +#include "vme_pio2.h" + +static int pio2_cntr_irq_set(struct pio2_card *card, int id) +{ + int retval; + u8 data; + + data = PIO2_CNTR_SC_DEV[id] | PIO2_CNTR_RW_BOTH | card->cntr[id].mode; + retval = vme_master_write(card->window, &data, 1, PIO2_CNTR_CTRL[id]); + if (retval < 0) + return retval; + + data = card->cntr[id].count & 0xFF; + retval = vme_master_write(card->window, &data, 1, PIO2_CNTR_DATA[id]); + if (retval < 0) + return retval; + + data = (card->cntr[id].count >> 8) & 0xFF; + retval = vme_master_write(card->window, &data, 1, PIO2_CNTR_DATA[id]); + if (retval < 0) + return retval; + + return 0; +} + +int pio2_cntr_reset(struct pio2_card *card) +{ + int i, retval = 0; + u8 reg; + + /* Clear down all timers */ + for (i = 0; i < 6; i++) { + card->cntr[i].mode = PIO2_CNTR_MODE5; + card->cntr[i].count = 0; + retval = pio2_cntr_irq_set(card, i); + if (retval < 0) + return retval; + } + + /* Ensure all counter interrupts are cleared */ + do { + retval = vme_master_read(card->window, ®, 1, + PIO2_REGS_INT_STAT_CNTR); + if (retval < 0) + return retval; + } while (reg != 0); + + return retval; +} + diff --git a/drivers/staging/vme/devices/vme_pio2_core.c b/drivers/staging/vme/devices/vme_pio2_core.c new file mode 100644 index 000000000000..9fedc442a779 --- /dev/null +++ b/drivers/staging/vme/devices/vme_pio2_core.c @@ -0,0 +1,524 @@ +/* + * GE PIO2 6U VME I/O Driver + * + * Author: Martyn Welch + * Copyright 2009 GE Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../vme.h" +#include "vme_pio2.h" + + +static const char driver_name[] = "pio2"; + +static int bus[PIO2_CARDS_MAX]; +static int bus_num; +static long base[PIO2_CARDS_MAX]; +static int base_num; +static int vector[PIO2_CARDS_MAX]; +static int vector_num; +static int level[PIO2_CARDS_MAX]; +static int level_num; +static const char *variant[PIO2_CARDS_MAX]; +static int variant_num; + +static int loopback; + +static int pio2_match(struct vme_dev *); +static int __devinit pio2_probe(struct vme_dev *); +static int __devexit pio2_remove(struct vme_dev *); + +static int pio2_get_led(struct pio2_card *card) +{ + /* Can't read hardware, state saved in structure */ + return card->led; +} + +static int pio2_set_led(struct pio2_card *card, int state) +{ + u8 reg; + int retval; + + reg = card->irq_level; + + /* Register state inverse of led state */ + if (!state) + reg |= PIO2_LED; + + if (loopback) + reg |= PIO2_LOOP; + + retval = vme_master_write(card->window, ®, 1, PIO2_REGS_CTRL); + if (retval < 0) + return retval; + + card->led = state ? 1 : 0; + + return 0; +} + +static void pio2_int(int level, int vector, void *ptr) +{ + int vec, i, channel, retval; + u8 reg; + struct pio2_card *card = ptr; + + vec = vector & ~PIO2_VME_VECTOR_MASK; + + switch (vec) { + case 0: + dev_warn(&card->vdev->dev, "Spurious Interrupt\n"); + break; + case 1: + case 2: + case 3: + case 4: + /* Channels 0 to 7 */ + retval = vme_master_read(card->window, ®, 1, + PIO2_REGS_INT_STAT[vec - 1]); + if (retval < 0) { + dev_err(&card->vdev->dev, + "Unable to read IRQ status register\n"); + return; + } + for (i = 0; i < 8; i++) { + channel = ((vec - 1) * 8) + i; + if (reg & PIO2_CHANNEL_BIT[channel]) + dev_info(&card->vdev->dev, + "Interrupt on I/O channel %d\n", + channel); + } + break; + case 5: + case 6: + case 7: + case 8: + case 9: + case 10: + /* Counters are dealt with by their own handler */ + dev_err(&card->vdev->dev, + "Counter interrupt\n"); + break; + } +} + + +/* + * We return whether this has been successful - this is used in the probe to + * ensure we have a valid card. + */ +static int pio2_reset_card(struct pio2_card *card) +{ + int retval = 0; + u8 data = 0; + + /* Clear main register*/ + retval = vme_master_write(card->window, &data, 1, PIO2_REGS_CTRL); + if (retval < 0) + return retval; + + /* Clear VME vector */ + retval = vme_master_write(card->window, &data, 1, PIO2_REGS_VME_VECTOR); + if (retval < 0) + return retval; + + /* Reset GPIO */ + retval = pio2_gpio_reset(card); + if (retval < 0) + return retval; + + /* Reset counters */ + retval = pio2_cntr_reset(card); + if (retval < 0) + return retval; + + return 0; +} + +static struct vme_driver pio2_driver = { + .name = driver_name, + .match = pio2_match, + .probe = pio2_probe, + .remove = __devexit_p(pio2_remove), +}; + + +static int __init pio2_init(void) +{ + int retval = 0; + + if (bus_num == 0) { + printk(KERN_ERR "%s: No cards, skipping registration\n", + driver_name); + goto err_nocard; + } + + if (bus_num > PIO2_CARDS_MAX) { + printk(KERN_ERR + "%s: Driver only able to handle %d PIO2 Cards\n", + driver_name, PIO2_CARDS_MAX); + bus_num = PIO2_CARDS_MAX; + } + + /* Register the PIO2 driver */ + retval = vme_register_driver(&pio2_driver, bus_num); + if (retval != 0) + goto err_reg; + + return retval; + +err_reg: +err_nocard: + return retval; +} + +static int pio2_match(struct vme_dev *vdev) +{ + + if (vdev->num >= bus_num) { + dev_err(&vdev->dev, + "The enumeration of the VMEbus to which the board is connected must be specified"); + return 0; + } + + if (vdev->num >= base_num) { + dev_err(&vdev->dev, + "The VME address for the cards registers must be specified"); + return 0; + } + + if (vdev->num >= vector_num) { + dev_err(&vdev->dev, + "The IRQ vector used by the card must be specified"); + return 0; + } + + if (vdev->num >= level_num) { + dev_err(&vdev->dev, + "The IRQ level used by the card must be specified"); + return 0; + } + + if (vdev->num >= variant_num) { + dev_err(&vdev->dev, "The variant of the card must be specified"); + return 0; + } + + return 1; +} + +static int __devinit pio2_probe(struct vme_dev *vdev) +{ + struct pio2_card *card; + int retval; + int i; + u8 reg; + int vec; + + card = kzalloc(sizeof(struct pio2_card), GFP_KERNEL); + if (card == NULL) { + dev_err(&vdev->dev, "Unable to allocate card structure\n"); + retval = -ENOMEM; + goto err_struct; + } + + card->id = vdev->num; + card->bus = bus[card->id]; + card->base = base[card->id]; + card->irq_vector = vector[card->id]; + card->irq_level = level[card->id] & PIO2_VME_INT_MASK; + strncpy(card->variant, variant[card->id], PIO2_VARIANT_LENGTH); + card->vdev = vdev; + + for (i = 0; i < PIO2_VARIANT_LENGTH; i++) { + + if (isdigit(card->variant[i]) == 0) { + dev_err(&card->vdev->dev, "Variant invalid\n"); + retval = -EINVAL; + goto err_variant; + } + } + + /* + * Bottom 4 bits of VME interrupt vector used to determine source, + * provided vector should only use upper 4 bits. + */ + if (card->irq_vector & ~PIO2_VME_VECTOR_MASK) { + dev_err(&card->vdev->dev, + "Invalid VME IRQ Vector, vector must not use lower 4 bits\n"); + retval = -EINVAL; + goto err_vector; + } + + /* + * There is no way to determine the build variant or whether each bank + * is input, output or both at run time. The inputs are also inverted + * if configured as both. + * + * We pass in the board variant and use that to determine the + * configuration of the banks. + */ + for (i = 1; i < PIO2_VARIANT_LENGTH; i++) { + switch (card->variant[i]) { + case '0': + card->bank[i-1].config = NOFIT; + break; + case '1': + case '2': + case '3': + case '4': + card->bank[i-1].config = INPUT; + break; + case '5': + card->bank[i-1].config = OUTPUT; + break; + case '6': + case '7': + case '8': + case '9': + card->bank[i-1].config = BOTH; + break; + } + } + + /* Get a master window and position over regs */ + card->window = vme_master_request(vdev, VME_A24, VME_SCT, VME_D16); + if (card->window == NULL) { + dev_err(&card->vdev->dev, + "Unable to assign VME master resource\n"); + retval = -EIO; + goto err_window; + } + + retval = vme_master_set(card->window, 1, card->base, 0x10000, VME_A24, + (VME_SCT | VME_USER | VME_DATA), VME_D16); + if (retval) { + dev_err(&card->vdev->dev, + "Unable to configure VME master resource\n"); + goto err_set; + } + + /* + * There is also no obvious register which we can probe to determine + * whether the provided base is valid. If we can read the "ID Register" + * offset and the reset function doesn't error, assume we have a valid + * location. + */ + retval = vme_master_read(card->window, ®, 1, PIO2_REGS_ID); + if (retval < 0) { + dev_err(&card->vdev->dev, "Unable to read from device\n"); + goto err_read; + } + + dev_dbg(&card->vdev->dev, "ID Register:%x\n", reg); + + /* + * Ensure all the I/O is cleared. We can't read back the states, so + * this is the only method we have to ensure that the I/O is in a known + * state. + */ + retval = pio2_reset_card(card); + if (retval) { + dev_err(&card->vdev->dev, + "Failed to reset card, is location valid?"); + retval = -ENODEV; + goto err_reset; + } + + /* Configure VME Interrupts */ + reg = card->irq_level; + if (pio2_get_led(card)) + reg |= PIO2_LED; + if (loopback) + reg |= PIO2_LOOP; + retval = vme_master_write(card->window, ®, 1, PIO2_REGS_CTRL); + if (retval < 0) + return retval; + + /* Set VME vector */ + retval = vme_master_write(card->window, &card->irq_vector, 1, + PIO2_REGS_VME_VECTOR); + if (retval < 0) + return retval; + + /* Attach spurious interrupt handler. */ + vec = card->irq_vector | PIO2_VME_VECTOR_SPUR; + + retval = vme_irq_request(vdev, card->irq_level, vec, + &pio2_int, (void *)card); + if (retval < 0) { + dev_err(&card->vdev->dev, + "Unable to attach VME interrupt vector0x%x, level 0x%x\n", + vec, card->irq_level); + goto err_irq; + } + + /* Attach GPIO interrupt handlers. */ + for (i = 0; i < 4; i++) { + vec = card->irq_vector | PIO2_VECTOR_BANK[i]; + + retval = vme_irq_request(vdev, card->irq_level, vec, + &pio2_int, (void *)card); + if (retval < 0) { + dev_err(&card->vdev->dev, + "Unable to attach VME interrupt vector0x%x, level 0x%x\n", + vec, card->irq_level); + goto err_gpio_irq; + } + } + + /* Attach counter interrupt handlers. */ + for (i = 0; i < 6; i++) { + vec = card->irq_vector | PIO2_VECTOR_CNTR[i]; + + retval = vme_irq_request(vdev, card->irq_level, vec, + &pio2_int, (void *)card); + if (retval < 0) { + dev_err(&card->vdev->dev, + "Unable to attach VME interrupt vector0x%x, level 0x%x\n", + vec, card->irq_level); + goto err_cntr_irq; + } + } + + /* Register IO */ + retval = pio2_gpio_init(card); + if (retval < 0) { + dev_err(&card->vdev->dev, + "Unable to register with GPIO framework\n"); + goto err_gpio; + } + + /* Set LED - This also sets interrupt level */ + retval = pio2_set_led(card, 0); + if (retval < 0) { + dev_err(&card->vdev->dev, "Unable to set LED\n"); + goto err_led; + } + + dev_set_drvdata(&card->vdev->dev, card); + + dev_info(&card->vdev->dev, + "PIO2 (variant %s) configured at 0x%lx\n", card->variant, + card->base); + + return 0; + +err_led: + pio2_gpio_exit(card); +err_gpio: + i = 6; +err_cntr_irq: + while (i > 0) { + i--; + vec = card->irq_vector | PIO2_VECTOR_CNTR[i]; + vme_irq_free(vdev, card->irq_level, vec); + } + + i = 4; +err_gpio_irq: + while (i > 0) { + i--; + vec = card->irq_vector | PIO2_VECTOR_BANK[i]; + vme_irq_free(vdev, card->irq_level, vec); + } + + vec = (card->irq_vector & PIO2_VME_VECTOR_MASK) | PIO2_VME_VECTOR_SPUR; + vme_irq_free(vdev, card->irq_level, vec); +err_irq: + pio2_reset_card(card); +err_reset: +err_read: + vme_master_set(card->window, 0, 0, 0, VME_A16, 0, VME_D16); +err_set: + vme_master_free(card->window); +err_window: +err_vector: +err_variant: + kfree(card); +err_struct: + return retval; +} + +static int __devexit pio2_remove(struct vme_dev *vdev) +{ + int vec; + int i; + + struct pio2_card *card = dev_get_drvdata(&vdev->dev); + + pio2_gpio_exit(card); + + for (i = 0; i < 6; i++) { + vec = card->irq_vector | PIO2_VECTOR_CNTR[i]; + vme_irq_free(vdev, card->irq_level, vec); + } + + for (i = 0; i < 4; i++) { + vec = card->irq_vector | PIO2_VECTOR_BANK[i]; + vme_irq_free(vdev, card->irq_level, vec); + } + + vec = (card->irq_vector & PIO2_VME_VECTOR_MASK) | PIO2_VME_VECTOR_SPUR; + vme_irq_free(vdev, card->irq_level, vec); + + pio2_reset_card(card); + + vme_master_set(card->window, 0, 0, 0, VME_A16, 0, VME_D16); + + vme_master_free(card->window); + + kfree(card); + + return 0; +} + +static void __exit pio2_exit(void) +{ + vme_unregister_driver(&pio2_driver); +} + + +/* These are required for each board */ +MODULE_PARM_DESC(bus, "Enumeration of VMEbus to which the board is connected"); +module_param_array(bus, int, &bus_num, S_IRUGO); + +MODULE_PARM_DESC(base, "Base VME address for PIO2 Registers"); +module_param_array(base, long, &base_num, S_IRUGO); + +MODULE_PARM_DESC(vector, "VME IRQ Vector (Lower 4 bits masked)"); +module_param_array(vector, int, &vector_num, S_IRUGO); + +MODULE_PARM_DESC(level, "VME IRQ Level"); +module_param_array(level, int, &level_num, S_IRUGO); + +MODULE_PARM_DESC(variant, "Last 4 characters of PIO2 board variant"); +module_param_array(variant, charp, &variant_num, S_IRUGO); + +/* This is for debugging */ +MODULE_PARM_DESC(loopback, "Enable loopback mode on all cards"); +module_param(loopback, bool, S_IRUGO); + +MODULE_DESCRIPTION("GE PIO2 6U VME I/O Driver"); +MODULE_AUTHOR("Martyn Welch + * Copyright 2009 GE Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../vme.h" +#include "vme_pio2.h" + +static const char driver_name[] = "pio2_gpio"; + +static struct pio2_card *gpio_to_pio2_card(struct gpio_chip *chip) +{ + return container_of(chip, struct pio2_card, gc); +} + +static int pio2_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + u8 reg; + int retval; + struct pio2_card *card = gpio_to_pio2_card(chip); + + if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == OUTPUT) | + (card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) { + + dev_err(&card->vdev->dev, "Channel not available as input\n"); + return 0; + } + + retval = vme_master_read(card->window, ®, 1, + PIO2_REGS_DATA[PIO2_CHANNEL_BANK[offset]]); + if (retval < 0) { + dev_err(&card->vdev->dev, "Unable to read from GPIO\n"); + return 0; + } + + /* + * Remember, input on channels configured as both input and output + * are inverted! + */ + if (reg & PIO2_CHANNEL_BIT[offset]) { + if (card->bank[PIO2_CHANNEL_BANK[offset]].config != BOTH) + return 0; + else + return 1; + } else { + if (card->bank[PIO2_CHANNEL_BANK[offset]].config != BOTH) + return 1; + else + return 0; + } +} + +static void pio2_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + u8 reg; + int retval; + struct pio2_card *card = gpio_to_pio2_card(chip); + + if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == INPUT) | + (card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) { + + dev_err(&card->vdev->dev, "Channel not availabe as output\n"); + return; + } + + if (value) + reg = card->bank[PIO2_CHANNEL_BANK[offset]].value | + PIO2_CHANNEL_BIT[offset]; + else + reg = card->bank[PIO2_CHANNEL_BANK[offset]].value & + ~PIO2_CHANNEL_BIT[offset]; + + retval = vme_master_write(card->window, ®, 1, + PIO2_REGS_DATA[PIO2_CHANNEL_BANK[offset]]); + if (retval < 0) { + dev_err(&card->vdev->dev, "Unable to write to GPIO\n"); + return; + } + + card->bank[PIO2_CHANNEL_BANK[offset]].value = reg; +} + +/* Directionality configured at board build - send appropriate response */ +static int pio2_gpio_dir_in(struct gpio_chip *chip, unsigned offset) +{ + int data; + struct pio2_card *card = gpio_to_pio2_card(chip); + + if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == OUTPUT) | + (card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) { + dev_err(&card->vdev->dev, + "Channel directionality not configurable at runtine\n"); + + data = -EINVAL; + } else { + data = 0; + } + + return data; +} + +/* Directionality configured at board build - send appropriate response */ +static int pio2_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int value) +{ + int data; + struct pio2_card *card = gpio_to_pio2_card(chip); + + if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == INPUT) | + (card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) { + dev_err(&card->vdev->dev, + "Channel directionality not configurable at runtine\n"); + + data = -EINVAL; + } else { + data = 0; + } + + return data; +} + +/* + * We return whether this has been successful - this is used in the probe to + * ensure we have a valid card. + */ +int pio2_gpio_reset(struct pio2_card *card) +{ + int retval = 0; + int i, j; + + u8 data = 0; + + /* Zero output registers */ + for (i = 0; i < 4; i++) { + retval = vme_master_write(card->window, &data, 1, + PIO2_REGS_DATA[i]); + if (retval < 0) + return retval; + card->bank[i].value = 0; + } + + /* Set input interrupt masks */ + for (i = 0; i < 8; i++) { + retval = vme_master_write(card->window, &data, 1, + PIO2_REGS_INT_MASK[i]); + if (retval < 0) + return retval; + + for (j = 0; j < 8; j++) + card->bank[i].irq[j] = NONE; + } + + /* Ensure all I/O interrupts are cleared */ + for (i = 0; i < 4; i++) { + do { + retval = vme_master_read(card->window, &data, 1, + PIO2_REGS_INT_STAT[i]); + if (retval < 0) + return retval; + } while (data != 0); + } + + return 0; +} + +int __init pio2_gpio_init(struct pio2_card *card) +{ + int retval = 0; + char *label; + + label = kmalloc(PIO2_NUM_CHANNELS, GFP_KERNEL); + if (label == NULL) { + dev_err(&card->vdev->dev, "Unable to allocate GPIO label\n"); + return -ENOMEM; + } + + sprintf(label, "%s@%s", driver_name, dev_name(&card->vdev->dev)); + card->gc.label = label; + + card->gc.ngpio = PIO2_NUM_CHANNELS; + /* Dynamic allocation of base */ + card->gc.base = -1; + /* Setup pointers to chip functions */ + card->gc.direction_input = pio2_gpio_dir_in; + card->gc.direction_output = pio2_gpio_dir_out; + card->gc.get = pio2_gpio_get; + card->gc.set = pio2_gpio_set; + + /* This function adds a memory mapped GPIO chip */ + retval = gpiochip_add(&(card->gc)); + if (retval) { + dev_err(&card->vdev->dev, "Unable to register GPIO\n"); + kfree(card->gc.label); + } + + return retval; +}; + +void __exit pio2_gpio_exit(struct pio2_card *card) +{ + const char *label = card->gc.label; + + if (gpiochip_remove(&(card->gc))) + dev_err(&card->vdev->dev, "Failed to remove GPIO"); + + kfree(label); +} + -- 2.39.5