From 9fee607f0b29adabd72265a847b8e421dff10d66 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Wed, 4 Jan 2012 01:32:49 -0800 Subject: [PATCH] [SCSI] isci: oem parameter format v1.3 (cable select) v1.3 allows the attenuation of the attached cables to be specified to the driver in terms of 'short', 'medium', and 'long' (see probe_roms.h). These settings (per phy) are retrieved from the platform oem-parameters (BIOS rom) or via a module parameter override. Reviewed-by: Jiangbi Liu Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/isci/host.c | 43 +++++++++++++++++++++++++++++++--- drivers/scsi/isci/host.h | 18 ++++++++++++++ drivers/scsi/isci/init.c | 16 +++++++++++++ drivers/scsi/isci/isci.h | 1 + drivers/scsi/isci/probe_roms.h | 38 ++++++++++++++++++++++++++++-- 5 files changed, 111 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index ed1441c8957..9a52b984620 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1666,6 +1666,9 @@ static void sci_controller_set_default_config_parameters(struct isci_host *ihost /* Default to no SSC operation. */ ihost->oem_parameters.controller.do_enable_ssc = false; + /* Default to short cables on all phys. */ + ihost->oem_parameters.controller.cable_selection_mask = 0; + /* Initialize all of the port parameter information to narrow ports. */ for (index = 0; index < SCI_MAX_PORTS; index++) { ihost->oem_parameters.ports[index].phy_mask = 0; @@ -1953,12 +1956,46 @@ void sci_controller_power_control_queue_remove(struct isci_host *ihost, static int is_long_cable(int phy, unsigned char selection_byte) { - return 0; + return !!(selection_byte & (1 << phy)); } static int is_medium_cable(int phy, unsigned char selection_byte) { - return 0; + return !!(selection_byte & (1 << (phy + 4))); +} + +static enum cable_selections decode_selection_byte( + int phy, + unsigned char selection_byte) +{ + return ((selection_byte & (1 << phy)) ? 1 : 0) + + (selection_byte & (1 << (phy + 4)) ? 2 : 0); +} + +static unsigned char *to_cable_select(struct isci_host *ihost) +{ + if (is_cable_select_overridden()) + return ((unsigned char *)&cable_selection_override) + + ihost->id; + else + return &ihost->oem_parameters.controller.cable_selection_mask; +} + +enum cable_selections decode_cable_selection(struct isci_host *ihost, int phy) +{ + return decode_selection_byte(phy, *to_cable_select(ihost)); +} + +char *lookup_cable_names(enum cable_selections selection) +{ + static char *cable_names[] = { + [short_cable] = "short", + [long_cable] = "long", + [medium_cable] = "medium", + [undefined_cable] = "" /* bit 0==1 */ + }; + return (selection <= undefined_cable) ? cable_names[selection] + : cable_names[undefined_cable]; } #define AFE_REGISTER_WRITE_DELAY 10 @@ -1967,10 +2004,10 @@ static void sci_controller_afe_initialization(struct isci_host *ihost) { struct scu_afe_registers __iomem *afe = &ihost->scu_registers->afe; const struct sci_oem_params *oem = &ihost->oem_parameters; - unsigned char cable_selection_mask = 0; struct pci_dev *pdev = ihost->pdev; u32 afe_status; u32 phy_id; + unsigned char cable_selection_mask = *to_cable_select(ihost); /* Clear DFX Status registers */ writel(0x0081000f, &afe->afe_dfx_master_control0); diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 4573075a6b9..5477f0fa823 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -447,6 +447,24 @@ static inline bool is_c1(struct pci_dev *pdev) return false; } +enum cable_selections { + short_cable = 0, + long_cable = 1, + medium_cable = 2, + undefined_cable = 3 +}; + +#define CABLE_OVERRIDE_DISABLED (0x10000) + +static inline int is_cable_select_overridden(void) +{ + return cable_selection_override < CABLE_OVERRIDE_DISABLED; +} + +enum cable_selections decode_cable_selection(struct isci_host *ihost, int phy); +void validate_cable_selections(struct isci_host *ihost); +char *lookup_cable_names(enum cable_selections); + /* set hw control for 'activity', even though active enclosures seem to drive * the activity led on their own. Skip setting FSENG control on 'status' due * to unexpected operation and 'error' due to not being a supported automatic diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 8a34fd92e42..1047108ba4d 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -122,6 +122,14 @@ unsigned char max_concurr_spinup; module_param(max_concurr_spinup, byte, 0); MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup"); +uint cable_selection_override = CABLE_OVERRIDE_DISABLED; +module_param(cable_selection_override, uint, 0); + +MODULE_PARM_DESC(cable_selection_override, + "This field indicates length of the SAS/SATA cable between " + "host and device. If any bits > 15 are set (default) " + "indicates \"use platform defaults\""); + static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev); @@ -412,6 +420,14 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) return NULL; isci_host->shost = shost; + dev_info(&pdev->dev, "%sSCU controller %d: phy 3-0 cables: " + "{%s, %s, %s, %s}\n", + (is_cable_select_overridden() ? "* " : ""), isci_host->id, + lookup_cable_names(decode_cable_selection(isci_host, 3)), + lookup_cable_names(decode_cable_selection(isci_host, 2)), + lookup_cable_names(decode_cable_selection(isci_host, 1)), + lookup_cable_names(decode_cable_selection(isci_host, 0))); + err = isci_host_init(isci_host); if (err) goto err_shost; diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 8efeb6b0832..234ab46fce3 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -480,6 +480,7 @@ extern u16 ssp_inactive_to; extern u16 stp_inactive_to; extern unsigned char phy_gen; extern unsigned char max_concurr_spinup; +extern uint cable_selection_override; irqreturn_t isci_msix_isr(int vec, void *data); irqreturn_t isci_intx_isr(int vec, void *data); diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h index 42dd05414f3..bb0e9d4d97c 100644 --- a/drivers/scsi/isci/probe_roms.h +++ b/drivers/scsi/isci/probe_roms.h @@ -193,7 +193,8 @@ struct isci_oem_hdr { #define ISCI_ROM_VER_1_0 0x10 #define ISCI_ROM_VER_1_1 0x11 -#define ISCI_ROM_VER_LATEST ISCI_ROM_VER_1_1 +#define ISCI_ROM_VER_1_3 0x13 +#define ISCI_ROM_VER_LATEST ISCI_ROM_VER_1_3 /* Allowed PORT configuration modes APC Automatic PORT configuration mode is * defined by the OEM configuration parameters providing no PHY_MASK parameters @@ -270,7 +271,40 @@ struct sci_oem_params { }; uint8_t do_enable_ssc; }; - uint8_t reserved; + /* + * This field indicates length of the SAS/SATA cable between + * host and device. + * This field is used make relationship between analog + * parameters of the phy in the silicon and length of the cable. + * Supported cable attenuation levels: + * "short"- up to 3m, "medium"-3m to 6m, and "long"- more than + * 6m. + * + * This is bit mask field: + * + * BIT: (MSB) 7 6 5 4 + * ASSIGNMENT: - Medium cable + * length assignment + * BIT: 3 2 1 0 (LSB) + * ASSIGNMENT: - Long cable length + * assignment + * + * BITS 7-4 are set when the cable length is assigned to medium + * BITS 3-0 are set when the cable length is assigned to long + * + * The BIT positions are clear when the cable length is + * assigned to short. + * + * Setting the bits for both long and medium cable length is + * undefined. + * + * A value of 0x84 would assign + * phy3 - medium + * phy2 - long + * phy1 - short + * phy0 - short + */ + uint8_t cable_selection_mask; } controller; struct { -- 2.39.5