From a00ae34ac8bc8a5897d9b6b9b685c39b955b14b9 Mon Sep 17 00:00:00 2001 From: Ira Snyder Date: Thu, 3 Mar 2011 07:55:01 +0000 Subject: [PATCH] fsldma: make halt behave nicely on all supported controllers The original dma_halt() function set the CA (channel abort) bit on both the 83xx and 85xx controllers. This is incorrect on the 83xx, where this bit means TEM (transfer error mask) instead. The 83xx doesn't support channel abort, so we only do this operation on 85xx. Signed-off-by: Ira W. Snyder Signed-off-by: Dan Williams --- drivers/dma/fsldma.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index d300de456c90..8670a5012122 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -221,13 +221,26 @@ static void dma_halt(struct fsldma_chan *chan) u32 mode; int i; + /* read the mode register */ mode = DMA_IN(chan, &chan->regs->mr, 32); - mode |= FSL_DMA_MR_CA; - DMA_OUT(chan, &chan->regs->mr, mode, 32); - mode &= ~(FSL_DMA_MR_CS | FSL_DMA_MR_EMS_EN | FSL_DMA_MR_CA); + /* + * The 85xx controller supports channel abort, which will stop + * the current transfer. On 83xx, this bit is the transfer error + * mask bit, which should not be changed. + */ + if ((chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) { + mode |= FSL_DMA_MR_CA; + DMA_OUT(chan, &chan->regs->mr, mode, 32); + + mode &= ~FSL_DMA_MR_CA; + } + + /* stop the DMA controller */ + mode &= ~(FSL_DMA_MR_CS | FSL_DMA_MR_EMS_EN); DMA_OUT(chan, &chan->regs->mr, mode, 32); + /* wait for the DMA controller to become idle */ for (i = 0; i < 100; i++) { if (dma_is_idle(chan)) return; -- 2.39.5