From a05f92b70205df5927d767e9e0afecd2e5fde6d2 Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Tue, 12 Feb 2013 15:08:09 +0530 Subject: [PATCH] arm: omap: board-sdp3430: use sharp panel's gpio handling The omap3430sdp board file currently requests gpios required by the sharp_ls dpi panel, and provides platform_enable/disable callbacks to configure them. These tasks have been moved to the sharp_ls panel driver itself and shouldn't be done in the board files. Remove the gpio requests and the platform callbacks from the board file. Add the gpio information to panel_sharp_ls037v7dw01_data so that it's passed to the panel driver. Out of sharp panel's configurable pins, all apart from resb_gpio are managed by a CPLD on the display and set to a default value. Only the configurable pin is passed to platform data. The backlight GPIO doesn't go directly to the sharp panel, it is used to set up a voltage supply which goes to the LED+ pin of the panel, hence it isn't passed to panel as platform data, and configured in the board file itself. The backlight used to previously toggle through the platform_enable/disable callbacks, but now it is always on. This needs to be revisited. Signed-off-by: Archit Taneja Cc: Tony Lindgren --- arch/arm/mach-omap2/board-3430sdp.c | 42 +++++++++++++---------------- 1 file changed, 18 insertions(+), 24 deletions(-) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 2612eeaa5889..66cfcca0a707 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -108,34 +108,22 @@ static struct twl4030_keypad_data sdp3430_kp_data = { #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8 #define SDP3430_LCD_PANEL_ENABLE_GPIO 5 -static struct gpio sdp3430_dss_gpios[] __initdata = { - {SDP3430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "LCD reset" }, - {SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"}, -}; - static void __init sdp3430_display_init(void) { int r; - r = gpio_request_array(sdp3430_dss_gpios, - ARRAY_SIZE(sdp3430_dss_gpios)); + /* + * the backlight GPIO doesn't directly go to the panel, it enables + * an internal circuit on 3430sdp to create the signal V_BKL_28V, + * this is connected to LED+ pin of the sharp panel. This GPIO + * is left enabled in the board file, and not passed to the panel + * as platform_data. + */ + r = gpio_request_one(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, + GPIOF_OUT_INIT_HIGH, "LCD Backlight"); if (r) - printk(KERN_ERR "failed to get LCD control GPIOs\n"); - -} - -static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1); - gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1); - - return 0; -} + pr_err("failed to get LCD Backlight GPIO\n"); -static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0); - gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0); } static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev) @@ -147,14 +135,20 @@ static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev) { } +static struct panel_sharp_ls037v7dw01_data sdp3430_lcd_data = { + .resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO, + .ini_gpio = -1, + .mo_gpio = -1, + .lr_gpio = -1, + .ud_gpio = -1, +}; static struct omap_dss_device sdp3430_lcd_device = { .name = "lcd", .driver_name = "sharp_ls_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 16, - .platform_enable = sdp3430_panel_enable_lcd, - .platform_disable = sdp3430_panel_disable_lcd, + .data = &sdp3430_lcd_data, }; static struct tfp410_platform_data dvi_panel = { -- 2.39.5