From a29de31b9ed37ebc905fe8580506b93f28701e67 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Wed, 19 Oct 2016 10:28:24 +0800 Subject: [PATCH] usb: mtu3: Super-Speed Peripheral mode support add super-speed funtion for peripheral mode Signed-off-by: Chunfeng Yun Signed-off-by: Greg Kroah-Hartman --- drivers/usb/mtu3/mtu3.h | 13 +- drivers/usb/mtu3/mtu3_core.c | 202 +++++++++++++++++++++++++---- drivers/usb/mtu3/mtu3_gadget.c | 45 +++++-- drivers/usb/mtu3/mtu3_gadget_ep0.c | 90 +++++++++++++ drivers/usb/mtu3/mtu3_hw_regs.h | 33 +++++ 5 files changed, 346 insertions(+), 37 deletions(-) diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h index ad1a1338bff1..41a04732a274 100644 --- a/drivers/usb/mtu3/mtu3.h +++ b/drivers/usb/mtu3/mtu3.h @@ -53,6 +53,7 @@ struct mtu3_request; #define USB_QMU_TQSAR(epnum) (U3D_TXQSAR1 + (((epnum) - 1) * 0x10)) #define USB_QMU_TQCPR(epnum) (U3D_TXQCPR1 + (((epnum) - 1) * 0x10)) +#define SSUSB_U3_CTRL(p) (U3D_SSUSB_U3_CTRL_0P + ((p) * 0x08)) #define SSUSB_U2_CTRL(p) (U3D_SSUSB_U2_CTRL_0P + ((p) * 0x08)) #define MTU3_DRIVER_NAME "mtu3" @@ -63,6 +64,7 @@ struct mtu3_request; #define MTU3_EP_WEDGE BIT(2) #define MTU3_EP_BUSY BIT(3) +#define MTU3_U3_IP_SLOT_DEFAULT 2 #define MTU3_U2_IP_SLOT_DEFAULT 1 /** @@ -87,6 +89,7 @@ enum mtu3_speed { MTU3_SPEED_INACTIVE = 0, MTU3_SPEED_FULL = 1, MTU3_SPEED_HIGH = 3, + MTU3_SPEED_SUPER = 4, }; /** @@ -190,6 +193,7 @@ struct mtu3_ep { struct list_head req_list; struct mtu3_gpd_ring gpd_ring; + const struct usb_ss_ep_comp_descriptor *comp_desc; const struct usb_endpoint_descriptor *desc; int flags; @@ -208,7 +212,8 @@ struct mtu3_request { /** * struct mtu3 - device driver instance data. - * @slot: MTU3_U2_IP_SLOT_DEFAULT for U2 IP + * @slot: MTU3_U2_IP_SLOT_DEFAULT for U2 IP only, + * MTU3_U3_IP_SLOT_DEFAULT for U3 IP * @may_wakeup: means device's remote wakeup is enabled * @is_self_powered: is reported in device status and the config descriptor * @ep0_req: dummy request used while handling standard USB requests @@ -242,12 +247,16 @@ struct mtu3 { struct usb_gadget_driver *gadget_driver; struct mtu3_request ep0_req; u8 setup_buf[EP0_RESPONSE_BUF]; + u32 max_speed; unsigned is_active:1; unsigned may_wakeup:1; unsigned is_self_powered:1; unsigned test_mode:1; unsigned softconnect:1; + unsigned u1_enable:1; + unsigned u2_enable:1; + unsigned is_u3_ip:1; u8 address; u8 test_mode_nr; @@ -324,7 +333,7 @@ void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set); void mtu3_ep0_setup(struct mtu3 *mtu); void mtu3_start(struct mtu3 *mtu); void mtu3_stop(struct mtu3 *mtu); -void mtu3_hs_softconn_set(struct mtu3 *mtu, bool enable); +void mtu3_dev_on_off(struct mtu3 *mtu, int is_on); int mtu3_gadget_setup(struct mtu3 *mtu); void mtu3_gadget_cleanup(struct mtu3 *mtu); diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c index 33d21dddb8a0..f9817ad53e3c 100644 --- a/drivers/usb/mtu3/mtu3_core.c +++ b/drivers/usb/mtu3/mtu3_core.c @@ -72,8 +72,20 @@ static void ep_fifo_free(struct mtu3_ep *mep) __func__, mep->fifo_seg_size, mep->fifo_size, start_bit); } +/* enable/disable U3D SS function */ +static inline void mtu3_ss_func_set(struct mtu3 *mtu, bool enable) +{ + /* If usb3_en==0, LTSSM will go to SS.Disable state */ + if (enable) + mtu3_setbits(mtu->mac_base, U3D_USB3_CONFIG, USB3_EN); + else + mtu3_clrbits(mtu->mac_base, U3D_USB3_CONFIG, USB3_EN); + + dev_dbg(mtu->dev, "USB3_EN = %d\n", !!enable); +} + /* set/clear U3D HS device soft connect */ -void mtu3_hs_softconn_set(struct mtu3 *mtu, bool enable) +static inline void mtu3_hs_softconn_set(struct mtu3 *mtu, bool enable) { if (enable) { mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT, @@ -92,6 +104,13 @@ static int mtu3_device_enable(struct mtu3 *mtu) u32 check_clk = 0; mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN); + + if (mtu->is_u3_ip) { + check_clk = SSUSB_U3_MAC_RST_B_STS; + mtu3_clrbits(ibase, SSUSB_U3_CTRL(0), + (SSUSB_U3_PORT_DIS | SSUSB_U3_PORT_PDN | + SSUSB_U3_PORT_HOST_SEL)); + } mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), (SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_HOST_SEL)); @@ -104,6 +123,10 @@ static void mtu3_device_disable(struct mtu3 *mtu) { void __iomem *ibase = mtu->ippc_base; + if (mtu->is_u3_ip) + mtu3_setbits(ibase, SSUSB_U3_CTRL(0), + (SSUSB_U3_PORT_DIS | SSUSB_U3_PORT_PDN)); + mtu3_setbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN); mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL); @@ -142,6 +165,9 @@ static void mtu3_intr_status_clear(struct mtu3 *mtu) /* Clear U2 USB common interrupts status */ mtu3_writel(mbase, U3D_COMMON_USB_INTR, ~0x0); + /* Clear U3 LTSSM interrupts status */ + mtu3_writel(mbase, U3D_LTSSM_INTR, ~0x0); + /* Clear speed change interrupt status */ mtu3_writel(mbase, U3D_DEV_LINK_INTR, ~0x0); } @@ -153,13 +179,20 @@ static void mtu3_intr_enable(struct mtu3 *mtu) u32 value; /*Enable level 1 interrupts (BMU, QMU, MAC3, DMA, MAC2, EPCTL) */ - value = BMU_INTR | QMU_INTR | MAC2_INTR | EP_CTRL_INTR; + value = BMU_INTR | QMU_INTR | MAC3_INTR | MAC2_INTR | EP_CTRL_INTR; mtu3_writel(mbase, U3D_LV1IESR, value); /* Enable U2 common USB interrupts */ value = SUSPEND_INTR | RESUME_INTR | RESET_INTR; mtu3_writel(mbase, U3D_COMMON_USB_INTR_ENABLE, value); + if (mtu->is_u3_ip) { + /* Enable U3 LTSSM interrupts */ + value = HOT_RST_INTR | WARM_RST_INTR | VBUS_RISE_INTR | + VBUS_FALL_INTR | ENTER_U3_INTR | EXIT_U3_INTR; + mtu3_writel(mbase, U3D_LTSSM_INTR_ENABLE, value); + } + /* Enable QMU interrupts. */ value = TXQ_CSERR_INT | TXQ_LENERR_INT | RXQ_CSERR_INT | RXQ_LENERR_INT | RXQ_ZLPERR_INT; @@ -205,6 +238,17 @@ void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set) set ? "SEND STALL" : "CLEAR STALL, with EP RESET"); } +void mtu3_dev_on_off(struct mtu3 *mtu, int is_on) +{ + if (mtu->is_u3_ip && (mtu->max_speed == USB_SPEED_SUPER)) + mtu3_ss_func_set(mtu, is_on); + else + mtu3_hs_softconn_set(mtu, is_on); + + dev_info(mtu->dev, "gadget (%s) pullup D%s\n", + usb_speed_string(mtu->max_speed), is_on ? "+" : "-"); +} + void mtu3_start(struct mtu3 *mtu) { void __iomem *mbase = mtu->mac_base; @@ -214,13 +258,21 @@ void mtu3_start(struct mtu3 *mtu) mtu3_clrbits(mtu->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN); + /* + * When disable U2 port, USB2_CSR's register will be reset to + * default value after re-enable it again(HS is enabled by default). + * So if force mac to work as FS, disable HS function. + */ + if (mtu->max_speed == USB_SPEED_FULL) + mtu3_clrbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE); + /* Initialize the default interrupts */ mtu3_intr_enable(mtu); mtu->is_active = 1; if (mtu->softconnect) - mtu3_hs_softconn_set(mtu, 1); + mtu3_dev_on_off(mtu, 1); } void mtu3_stop(struct mtu3 *mtu) @@ -231,7 +283,7 @@ void mtu3_stop(struct mtu3 *mtu) mtu3_intr_status_clear(mtu); if (mtu->softconnect) - mtu3_hs_softconn_set(mtu, 0); + mtu3_dev_on_off(mtu, 0); mtu->is_active = 0; mtu3_setbits(mtu->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN); @@ -362,7 +414,10 @@ void mtu3_deconfig_ep(struct mtu3 *mtu, struct mtu3_ep *mep) } /* - * 1. when supports only HS, the fifo is shared for all EPs, and + * Two scenarios: + * 1. when device IP supports SS, the fifo of EP0, TX EPs, RX EPs + * are separated; + * 2. when supports only HS, the fifo is shared for all EPs, and * the capability registers of @EPNTXFFSZ or @EPNRXFFSZ indicate * the total fifo size of non-ep0, and ep0's is fixed to 64B, * so the total fifo size is 64B + @EPNTXFFSZ; @@ -376,18 +431,33 @@ static void get_ep_fifo_config(struct mtu3 *mtu) struct mtu3_fifo_info *rx_fifo; u32 fifosize; - fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNTXFFSZ); - tx_fifo = &mtu->tx_fifo; - tx_fifo->base = MTU3_U2_IP_EP0_FIFO_SIZE; - tx_fifo->limit = (fifosize / MTU3_EP_FIFO_UNIT) >> 1; - bitmap_zero(tx_fifo->bitmap, MTU3_FIFO_BIT_SIZE); - - rx_fifo = &mtu->rx_fifo; - rx_fifo->base = - tx_fifo->base + tx_fifo->limit * MTU3_EP_FIFO_UNIT; - rx_fifo->limit = tx_fifo->limit; - bitmap_zero(rx_fifo->bitmap, MTU3_FIFO_BIT_SIZE); - mtu->slot = MTU3_U2_IP_SLOT_DEFAULT; + if (mtu->is_u3_ip) { + fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNTXFFSZ); + tx_fifo = &mtu->tx_fifo; + tx_fifo->base = 0; + tx_fifo->limit = fifosize / MTU3_EP_FIFO_UNIT; + bitmap_zero(tx_fifo->bitmap, MTU3_FIFO_BIT_SIZE); + + fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNRXFFSZ); + rx_fifo = &mtu->rx_fifo; + rx_fifo->base = 0; + rx_fifo->limit = fifosize / MTU3_EP_FIFO_UNIT; + bitmap_zero(rx_fifo->bitmap, MTU3_FIFO_BIT_SIZE); + mtu->slot = MTU3_U3_IP_SLOT_DEFAULT; + } else { + fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNTXFFSZ); + tx_fifo = &mtu->tx_fifo; + tx_fifo->base = MTU3_U2_IP_EP0_FIFO_SIZE; + tx_fifo->limit = (fifosize / MTU3_EP_FIFO_UNIT) >> 1; + bitmap_zero(tx_fifo->bitmap, MTU3_FIFO_BIT_SIZE); + + rx_fifo = &mtu->rx_fifo; + rx_fifo->base = + tx_fifo->base + tx_fifo->limit * MTU3_EP_FIFO_UNIT; + rx_fifo->limit = tx_fifo->limit; + bitmap_zero(rx_fifo->bitmap, MTU3_FIFO_BIT_SIZE); + mtu->slot = MTU3_U2_IP_SLOT_DEFAULT; + } dev_dbg(mtu->dev, "%s, TX: base-%d, limit-%d; RX: base-%d, limit-%d\n", __func__, tx_fifo->base, tx_fifo->limit, @@ -416,17 +486,21 @@ static int mtu3_mem_alloc(struct mtu3 *mtu) void __iomem *mbase = mtu->mac_base; struct mtu3_ep *ep_array; int in_ep_num, out_ep_num; - u32 cap_epinfo; + u32 cap_epinfo, cap_dev; int ret; int i; mtu->hw_version = mtu3_readl(mtu->ippc_base, U3D_SSUSB_HW_ID); + cap_dev = mtu3_readl(mtu->ippc_base, U3D_SSUSB_IP_DEV_CAP); + mtu->is_u3_ip = !!SSUSB_IP_DEV_U3_PORT_NUM(cap_dev); + cap_epinfo = mtu3_readl(mbase, U3D_CAP_EPINFO); in_ep_num = CAP_TX_EP_NUM(cap_epinfo); out_ep_num = CAP_RX_EP_NUM(cap_epinfo); - dev_info(mtu->dev, "IP version 0x%x\n", mtu->hw_version); + dev_info(mtu->dev, "IP version 0x%x(%s IP)\n", mtu->hw_version, + mtu->is_u3_ip ? "U3" : "U2"); dev_info(mtu->dev, "fifosz/epnum: Tx=%#x/%d, Rx=%#x/%d\n", mtu3_readl(mbase, U3D_CAP_EPNTXFFSZ), in_ep_num, mtu3_readl(mbase, U3D_CAP_EPNRXFFSZ), out_ep_num); @@ -469,6 +543,27 @@ static void mtu3_mem_free(struct mtu3 *mtu) kfree(mtu->ep_array); } +static void mtu3_set_speed(struct mtu3 *mtu) +{ + void __iomem *mbase = mtu->mac_base; + + if (!mtu->is_u3_ip && (mtu->max_speed > USB_SPEED_HIGH)) + mtu->max_speed = USB_SPEED_HIGH; + + if (mtu->max_speed == USB_SPEED_FULL) { + /* disable U3 SS function */ + mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN); + /* disable HS function */ + mtu3_clrbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE); + } else if (mtu->max_speed == USB_SPEED_HIGH) { + mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN); + /* HS/FS detected by HW */ + mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE); + } + dev_info(mtu->dev, "max_speed: %s\n", + usb_speed_string(mtu->max_speed)); +} + static void mtu3_regs_init(struct mtu3 *mtu) { @@ -478,9 +573,16 @@ static void mtu3_regs_init(struct mtu3 *mtu) mtu3_intr_disable(mtu); mtu3_intr_status_clear(mtu); - mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN); - /* HS/FS detected by HW */ - mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE); + if (mtu->is_u3_ip) { + /* disable LGO_U1/U2 by default */ + mtu3_clrbits(mbase, U3D_LINK_POWER_CONTROL, + SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE | + SW_U1_REQUEST_ENABLE | SW_U2_REQUEST_ENABLE); + /* device responses to u3_exit from host automatically */ + mtu3_clrbits(mbase, U3D_LTSSM_CTRL, SOFT_U3_EXIT_EN); + } + + mtu3_set_speed(mtu); /* delay about 0.1us from detecting reset to send chirp-K */ mtu3_clrbits(mbase, U3D_LINK_RESET_INFO, WTCHRP_MSK); @@ -530,6 +632,10 @@ static irqreturn_t mtu3_link_isr(struct mtu3 *mtu) mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, LPM_BESL_STALL | LPM_BESLD_STALL); break; + case MTU3_SPEED_SUPER: + udev_speed = USB_SPEED_SUPER; + maxpkt = 512; + break; default: udev_speed = USB_SPEED_UNKNOWN; break; @@ -548,6 +654,34 @@ static irqreturn_t mtu3_link_isr(struct mtu3 *mtu) return IRQ_HANDLED; } +static irqreturn_t mtu3_u3_ltssm_isr(struct mtu3 *mtu) +{ + void __iomem *mbase = mtu->mac_base; + u32 ltssm; + + ltssm = mtu3_readl(mbase, U3D_LTSSM_INTR); + ltssm &= mtu3_readl(mbase, U3D_LTSSM_INTR_ENABLE); + mtu3_writel(mbase, U3D_LTSSM_INTR, ltssm); /* W1C */ + dev_dbg(mtu->dev, "=== LTSSM[%x] ===\n", ltssm); + + if (ltssm & (HOT_RST_INTR | WARM_RST_INTR)) + mtu3_gadget_reset(mtu); + + if (ltssm & VBUS_FALL_INTR) + mtu3_ss_func_set(mtu, false); + + if (ltssm & VBUS_RISE_INTR) + mtu3_ss_func_set(mtu, true); + + if (ltssm & EXIT_U3_INTR) + mtu3_gadget_resume(mtu); + + if (ltssm & ENTER_U3_INTR) + mtu3_gadget_suspend(mtu); + + return IRQ_HANDLED; +} + static irqreturn_t mtu3_u2_common_isr(struct mtu3 *mtu) { void __iomem *mbase = mtu->mac_base; @@ -588,6 +722,9 @@ irqreturn_t mtu3_irq(int irq, void *data) if (level1 & MAC2_INTR) mtu3_u2_common_isr(mtu); + if (level1 & MAC3_INTR) + mtu3_u3_ltssm_isr(mtu); + if (level1 & BMU_INTR) mtu3_ep0_isr(mtu); @@ -633,6 +770,27 @@ int ssusb_gadget_init(struct mtu3 *mtu) struct device *dev = mtu->dev; int ret; + mtu->max_speed = usb_get_maximum_speed(dev); + + /* check the max_speed parameter */ + switch (mtu->max_speed) { + case USB_SPEED_FULL: + case USB_SPEED_HIGH: + case USB_SPEED_SUPER: + break; + default: + dev_err(dev, "invalid max_speed: %s\n", + usb_speed_string(mtu->max_speed)); + /* fall through */ + case USB_SPEED_UNKNOWN: + /* default as SS */ + mtu->max_speed = USB_SPEED_SUPER; + break; + } + + dev_dbg(dev, "mac_base=0x%p, ippc_base=0x%p\n", + mtu->mac_base, mtu->ippc_base); + ret = mtu3_hw_init(mtu); if (ret) { dev_err(dev, "mtu3 hw init failed:%d\n", ret); diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c index 0e25e0f9e605..84f3fe169928 100644 --- a/drivers/usb/mtu3/mtu3_gadget.c +++ b/drivers/usb/mtu3/mtu3_gadget.c @@ -73,6 +73,7 @@ static void nuke(struct mtu3_ep *mep, const int status) static int mtu3_ep_enable(struct mtu3_ep *mep) { const struct usb_endpoint_descriptor *desc; + const struct usb_ss_ep_comp_descriptor *comp_desc; struct mtu3 *mtu = mep->mtu; u32 interval = 0; u32 mult = 0; @@ -81,11 +82,24 @@ static int mtu3_ep_enable(struct mtu3_ep *mep) int ret; desc = mep->desc; + comp_desc = mep->comp_desc; mep->type = usb_endpoint_type(desc); max_packet = usb_endpoint_maxp(desc); mep->maxp = max_packet & GENMASK(10, 0); switch (mtu->g.speed) { + case USB_SPEED_SUPER: + if (usb_endpoint_xfer_int(desc) || + usb_endpoint_xfer_isoc(desc)) { + interval = desc->bInterval; + interval = clamp_val(interval, 1, 16) - 1; + if (usb_endpoint_xfer_isoc(desc) && comp_desc) + mult = comp_desc->bmAttributes; + } + if (comp_desc) + burst = comp_desc->bMaxBurst; + + break; case USB_SPEED_HIGH: if (usb_endpoint_xfer_isoc(desc) || usb_endpoint_xfer_int(desc)) { @@ -103,6 +117,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep) mep->ep.maxpacket = mep->maxp; mep->ep.desc = desc; + mep->ep.comp_desc = comp_desc; /* slot mainly affects bulk/isoc transfer, so ignore int */ mep->slot = usb_endpoint_xfer_int(desc) ? 0 : mtu->slot; @@ -135,6 +150,7 @@ static int mtu3_ep_disable(struct mtu3_ep *mep) mep->desc = NULL; mep->ep.desc = NULL; + mep->comp_desc = NULL; mep->type = 0; mep->flags = 0; @@ -178,6 +194,7 @@ static int mtu3_gadget_ep_enable(struct usb_ep *ep, spin_lock_irqsave(&mtu->lock, flags); mep->desc = desc; + mep->comp_desc = ep->comp_desc; ret = mtu3_ep_enable(mep); if (ret) @@ -439,13 +456,15 @@ static int mtu3_gadget_wakeup(struct usb_gadget *gadget) return -EOPNOTSUPP; spin_lock_irqsave(&mtu->lock, flags); - - mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME); - spin_unlock_irqrestore(&mtu->lock, flags); - usleep_range(10000, 11000); - spin_lock_irqsave(&mtu->lock, flags); - mtu3_clrbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME); - + if (mtu->g.speed == USB_SPEED_SUPER) { + mtu3_setbits(mtu->mac_base, U3D_LINK_POWER_CONTROL, UX_EXIT); + } else { + mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME); + spin_unlock_irqrestore(&mtu->lock, flags); + usleep_range(10000, 11000); + spin_lock_irqsave(&mtu->lock, flags); + mtu3_clrbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME); + } spin_unlock_irqrestore(&mtu->lock, flags); return 0; } @@ -476,7 +495,7 @@ static int mtu3_gadget_pullup(struct usb_gadget *gadget, int is_on) mtu->softconnect = is_on; } else if (is_on != mtu->softconnect) { mtu->softconnect = is_on; - mtu3_hs_softconn_set(mtu, is_on); + mtu3_dev_on_off(mtu, is_on); } spin_unlock_irqrestore(&mtu->lock, flags); @@ -524,7 +543,7 @@ static void stop_activity(struct mtu3 *mtu) /* deactivate the hardware */ if (mtu->softconnect) { mtu->softconnect = 0; - mtu3_hs_softconn_set(mtu, 0); + mtu3_dev_on_off(mtu, 0); } /* @@ -587,14 +606,14 @@ static void init_hw_ep(struct mtu3 *mtu, struct mtu3_ep *mep, mep->ep.name = mep->name; INIT_LIST_HEAD(&mep->ep.ep_list); - /* initialize maxpacket as HS */ + /* initialize maxpacket as SS */ if (!epnum) { - usb_ep_set_maxpacket_limit(&mep->ep, 64); + usb_ep_set_maxpacket_limit(&mep->ep, 512); mep->ep.caps.type_control = true; mep->ep.ops = &mtu3_ep0_ops; mtu->g.ep0 = &mep->ep; } else { - usb_ep_set_maxpacket_limit(&mep->ep, 512); + usb_ep_set_maxpacket_limit(&mep->ep, 1024); mep->ep.caps.type_iso = true; mep->ep.caps.type_bulk = true; mep->ep.caps.type_int = true; @@ -637,7 +656,7 @@ int mtu3_gadget_setup(struct mtu3 *mtu) int ret; mtu->g.ops = &mtu3_gadget_ops; - mtu->g.max_speed = USB_SPEED_HIGH; + mtu->g.max_speed = mtu->max_speed; mtu->g.speed = USB_SPEED_UNKNOWN; mtu->g.sg_supported = 0; mtu->g.name = MTU3_DRIVER_NAME; diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c index 4e2c2babad20..2d7427b48775 100644 --- a/drivers/usb/mtu3/mtu3_gadget_ep0.c +++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c @@ -161,6 +161,41 @@ static int ep0_queue(struct mtu3_ep *mep0, struct mtu3_request *mreq); static void ep0_dummy_complete(struct usb_ep *ep, struct usb_request *req) {} +static void ep0_set_sel_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct mtu3_request *mreq; + struct mtu3 *mtu; + struct usb_set_sel_req sel; + + memcpy(&sel, req->buf, sizeof(sel)); + + mreq = to_mtu3_request(req); + mtu = mreq->mtu; + dev_dbg(mtu->dev, "u1sel:%d, u1pel:%d, u2sel:%d, u2pel:%d\n", + sel.u1_sel, sel.u1_pel, sel.u2_sel, sel.u2_pel); +} + +/* queue data stage to handle 6 byte SET_SEL request */ +static int ep0_set_sel(struct mtu3 *mtu, struct usb_ctrlrequest *setup) +{ + int ret; + u16 length = le16_to_cpu(setup->wLength); + + if (unlikely(length != 6)) { + dev_err(mtu->dev, "%s wrong wLength:%d\n", + __func__, length); + return -EINVAL; + } + + mtu->ep0_req.mep = mtu->ep0; + mtu->ep0_req.request.length = 6; + mtu->ep0_req.request.buf = mtu->setup_buf; + mtu->ep0_req.request.complete = ep0_set_sel_complete; + ret = ep0_queue(mtu->ep0, &mtu->ep0_req); + + return ret < 0 ? ret : 1; +} + static int ep0_get_status(struct mtu3 *mtu, const struct usb_ctrlrequest *setup) { @@ -174,6 +209,15 @@ ep0_get_status(struct mtu3 *mtu, const struct usb_ctrlrequest *setup) case USB_RECIP_DEVICE: result[0] = mtu->is_self_powered << USB_DEVICE_SELF_POWERED; result[0] |= mtu->may_wakeup << USB_DEVICE_REMOTE_WAKEUP; + /* superspeed only */ + if (mtu->g.speed == USB_SPEED_SUPER) { + result[0] |= mtu->u1_enable << USB_DEV_STAT_U1_ENABLED; + result[0] |= mtu->u2_enable << USB_DEV_STAT_U2_ENABLED; + } + + dev_dbg(mtu->dev, "%s result=%x, U1=%x, U2=%x\n", __func__, + result[0], mtu->u1_enable, mtu->u2_enable); + break; case USB_RECIP_INTERFACE: break; @@ -265,7 +309,9 @@ out: static int ep0_handle_feature_dev(struct mtu3 *mtu, struct usb_ctrlrequest *setup, bool set) { + void __iomem *mbase = mtu->mac_base; int handled = -EINVAL; + u32 lpc; switch (le16_to_cpu(setup->wValue)) { case USB_DEVICE_REMOTE_WAKEUP: @@ -279,6 +325,36 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu, handled = handle_test_mode(mtu, setup); break; + case USB_DEVICE_U1_ENABLE: + if (mtu->g.speed != USB_SPEED_SUPER || + mtu->g.state != USB_STATE_CONFIGURED) + break; + + lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL); + if (set) + lpc |= SW_U1_ACCEPT_ENABLE; + else + lpc &= ~SW_U1_ACCEPT_ENABLE; + mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc); + + mtu->u1_enable = !!set; + handled = 1; + break; + case USB_DEVICE_U2_ENABLE: + if (mtu->g.speed != USB_SPEED_SUPER || + mtu->g.state != USB_STATE_CONFIGURED) + break; + + lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL); + if (set) + lpc |= SW_U2_ACCEPT_ENABLE; + else + lpc &= ~SW_U2_ACCEPT_ENABLE; + mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc); + + mtu->u2_enable = !!set; + handled = 1; + break; default: handled = -EINVAL; break; @@ -303,6 +379,17 @@ static int ep0_handle_feature(struct mtu3 *mtu, case USB_RECIP_DEVICE: handled = ep0_handle_feature_dev(mtu, setup, set); break; + case USB_RECIP_INTERFACE: + /* superspeed only */ + if ((value == USB_INTRF_FUNC_SUSPEND) + && (mtu->g.speed == USB_SPEED_SUPER)) { + /* + * forward the request because function drivers + * should handle it + */ + handled = 0; + } + break; case USB_RECIP_ENDPOINT: epnum = index & USB_ENDPOINT_NUMBER_MASK; if (epnum == 0 || epnum >= mtu->num_eps || @@ -390,6 +477,9 @@ static int handle_standard_request(struct mtu3 *mtu, case USB_REQ_GET_STATUS: handled = ep0_get_status(mtu, setup); break; + case USB_REQ_SET_SEL: + handled = ep0_set_sel(mtu, setup); + break; case USB_REQ_SET_ISOCH_DELAY: handled = 1; break; diff --git a/drivers/usb/mtu3/mtu3_hw_regs.h b/drivers/usb/mtu3/mtu3_hw_regs.h index 08c83c5f6109..212367295276 100644 --- a/drivers/usb/mtu3/mtu3_hw_regs.h +++ b/drivers/usb/mtu3/mtu3_hw_regs.h @@ -260,13 +260,46 @@ /*---------------- SSUSB_USB3_MAC_CSR REGISTER DEFINITION ----------------*/ +#define U3D_LTSSM_CTRL (SSUSB_USB3_MAC_CSR_BASE + 0x0010) #define U3D_USB3_CONFIG (SSUSB_USB3_MAC_CSR_BASE + 0x001C) +#define U3D_LTSSM_INTR_ENABLE (SSUSB_USB3_MAC_CSR_BASE + 0x013C) +#define U3D_LTSSM_INTR (SSUSB_USB3_MAC_CSR_BASE + 0x0140) + /*---------------- SSUSB_USB3_MAC_CSR FIELD DEFINITION ----------------*/ +/* U3D_LTSSM_CTRL */ +#define FORCE_POLLING_FAIL BIT(4) +#define FORCE_RXDETECT_FAIL BIT(3) +#define SOFT_U3_EXIT_EN BIT(2) +#define COMPLIANCE_EN BIT(1) +#define U1_GO_U2_EN BIT(0) + /* U3D_USB3_CONFIG */ #define USB3_EN BIT(0) +/* U3D_LTSSM_INTR_ENABLE */ +/* U3D_LTSSM_INTR */ +#define U3_RESUME_INTR BIT(18) +#define U3_LFPS_TMOUT_INTR BIT(17) +#define VBUS_FALL_INTR BIT(16) +#define VBUS_RISE_INTR BIT(15) +#define RXDET_SUCCESS_INTR BIT(14) +#define EXIT_U3_INTR BIT(13) +#define EXIT_U2_INTR BIT(12) +#define EXIT_U1_INTR BIT(11) +#define ENTER_U3_INTR BIT(10) +#define ENTER_U2_INTR BIT(9) +#define ENTER_U1_INTR BIT(8) +#define ENTER_U0_INTR BIT(7) +#define RECOVERY_INTR BIT(6) +#define WARM_RST_INTR BIT(5) +#define HOT_RST_INTR BIT(4) +#define LOOPBACK_INTR BIT(3) +#define COMPLIANCE_INTR BIT(2) +#define SS_DISABLE_INTR BIT(1) +#define SS_INACTIVE_INTR BIT(0) + /*---------------- SSUSB_USB3_SYS_CSR REGISTER DEFINITION ----------------*/ #define U3D_LINK_UX_INACT_TIMER (SSUSB_USB3_SYS_CSR_BASE + 0x020C) -- 2.39.5