From a9a3a2739a44fc05dcaba0d4d36e52dc444c294f Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Tue, 15 Feb 2011 15:32:53 -0600 Subject: [PATCH] [SCSI] hpsa: make hpsa.hpsa_simple_mode=1 module parameter actually work It's not enough to simple avoid putting the board into performant mode, as we have to set up the interrupts differently, etc. When I originally tested this module parameter, I tested it incorrectly without realizing it, and the driver was running in performant mode the whole time unbeknownst to me. Signed-off-by: Stephen M. Cameron Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 37 +++++++++++++++++++++++-------------- drivers/scsi/hpsa.h | 1 + 2 files changed, 24 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 0f40de2a33de..66ccacfffd51 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -1186,7 +1186,7 @@ static int hpsa_scsi_detect(struct ctlr_info *h) sh->sg_tablesize = h->maxsgentries; h->scsi_host = sh; sh->hostdata[0] = (unsigned long) h; - sh->irq = h->intr[PERF_MODE_INT]; + sh->irq = h->intr[h->intr_mode]; sh->unique_id = sh->irq; error = scsi_add_host(sh, &h->pdev->dev); if (error) @@ -2902,10 +2902,14 @@ static inline u32 hpsa_tag_to_index(u32 tag) return tag >> DIRECT_LOOKUP_SHIFT; } -static inline u32 hpsa_tag_discard_error_bits(u32 tag) + +static inline u32 hpsa_tag_discard_error_bits(struct ctlr_info *h, u32 tag) { -#define HPSA_ERROR_BITS 0x03 - return tag & ~HPSA_ERROR_BITS; +#define HPSA_PERF_ERROR_BITS ((1 << DIRECT_LOOKUP_SHIFT) - 1) +#define HPSA_SIMPLE_ERROR_BITS 0x03 + if (unlikely(h->transMethod != CFGTBL_Trans_Performant)) + return tag & ~HPSA_SIMPLE_ERROR_BITS; + return tag & ~HPSA_PERF_ERROR_BITS; } /* process completion of an indexed ("direct lookup") command */ @@ -2930,7 +2934,7 @@ static inline u32 process_nonindexed_cmd(struct ctlr_info *h, u32 tag; struct CommandList *c = NULL; - tag = hpsa_tag_discard_error_bits(raw_tag); + tag = hpsa_tag_discard_error_bits(h, raw_tag); list_for_each_entry(c, &h->cmpQ, list) { if ((c->busaddr & 0xFFFFFFE0) == (tag & 0xFFFFFFE0)) { finish_cmd(c, raw_tag); @@ -2981,7 +2985,10 @@ static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id) return IRQ_HANDLED; } -/* Send a message CDB to the firmware. */ +/* Send a message CDB to the firmware. Careful, this only works + * in simple mode, not performant mode due to the tag lookup. + * We only ever use this immediately after a controller reset. + */ static __devinit int hpsa_message(struct pci_dev *pdev, unsigned char opcode, unsigned char type) { @@ -3047,7 +3054,7 @@ static __devinit int hpsa_message(struct pci_dev *pdev, unsigned char opcode, for (i = 0; i < HPSA_MSG_SEND_RETRY_LIMIT; i++) { tag = readl(vaddr + SA5_REPLY_PORT_OFFSET); - if (hpsa_tag_discard_error_bits(tag) == paddr32) + if ((tag & ~HPSA_SIMPLE_ERROR_BITS) == paddr32) break; msleep(HPSA_MSG_SEND_RETRY_INTERVAL_MSECS); } @@ -3379,7 +3386,7 @@ static void __devinit hpsa_interrupt_mode(struct ctlr_info *h) default_int_mode: #endif /* CONFIG_PCI_MSI */ /* if we get here we're going to use the default interrupt mode */ - h->intr[PERF_MODE_INT] = h->pdev->irq; + h->intr[h->intr_mode] = h->pdev->irq; } static int __devinit hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id) @@ -3760,6 +3767,8 @@ static int __devinit hpsa_init_one(struct pci_dev *pdev, h->pdev = pdev; h->busy_initializing = 1; + h->intr_mode = hpsa_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT; + printk(KERN_WARNING "hpsa_simple_mode is %d\n", hpsa_simple_mode); INIT_LIST_HEAD(&h->cmpQ); INIT_LIST_HEAD(&h->reqQ); spin_lock_init(&h->lock); @@ -3790,20 +3799,20 @@ static int __devinit hpsa_init_one(struct pci_dev *pdev, h->access.set_intr_mask(h, HPSA_INTR_OFF); if (h->msix_vector || h->msi_vector) - rc = request_irq(h->intr[PERF_MODE_INT], do_hpsa_intr_msi, + rc = request_irq(h->intr[h->intr_mode], do_hpsa_intr_msi, IRQF_DISABLED, h->devname, h); else - rc = request_irq(h->intr[PERF_MODE_INT], do_hpsa_intr_intx, + rc = request_irq(h->intr[h->intr_mode], do_hpsa_intr_intx, IRQF_DISABLED, h->devname, h); if (rc) { dev_err(&pdev->dev, "unable to get irq %d for %s\n", - h->intr[PERF_MODE_INT], h->devname); + h->intr[h->intr_mode], h->devname); goto clean2; } dev_info(&pdev->dev, "%s: <0x%x> at IRQ %d%s using DAC\n", h->devname, pdev->device, - h->intr[PERF_MODE_INT], dac ? "" : " not"); + h->intr[h->intr_mode], dac ? "" : " not"); h->cmd_pool_bits = kmalloc(((h->nr_cmds + BITS_PER_LONG - @@ -3854,7 +3863,7 @@ clean4: h->nr_cmds * sizeof(struct ErrorInfo), h->errinfo_pool, h->errinfo_pool_dhandle); - free_irq(h->intr[PERF_MODE_INT], h); + free_irq(h->intr[h->intr_mode], h); clean2: clean1: h->busy_initializing = 0; @@ -3898,7 +3907,7 @@ static void hpsa_shutdown(struct pci_dev *pdev) */ hpsa_flush_cache(h); h->access.set_intr_mask(h, HPSA_INTR_OFF); - free_irq(h->intr[PERF_MODE_INT], h); + free_irq(h->intr[h->intr_mode], h); #ifdef CONFIG_PCI_MSI if (h->msix_vector) pci_disable_msix(h->pdev); diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h index e89819342364..621a1530054a 100644 --- a/drivers/scsi/hpsa.h +++ b/drivers/scsi/hpsa.h @@ -72,6 +72,7 @@ struct ctlr_info { unsigned int intr[4]; unsigned int msix_vector; unsigned int msi_vector; + int intr_mode; /* either PERF_MODE_INT or SIMPLE_MODE_INT */ struct access_method access; /* queue and queue Info */ -- 2.39.5