From a9b89e2567c743483e6354f64d7a7e3a8c101e9e Mon Sep 17 00:00:00 2001 From: Jingjun Wu Date: Fri, 2 Mar 2012 20:52:14 -0600 Subject: [PATCH] rtlwifi: rtl8192ce: Fix loss of receive performance Driver rtl8192ce when used with the RTL8188CE device would start at about 20 Mbps on a 54 Mbps connection, but quickly drop to 1 Mbps. One of the symptoms is that the AP would need to retransmit each packet 4 of 5 times before the driver would acknowledge it. Recovery is possible only by unloading and reloading the driver. This problem was reported at https://bugzilla.redhat.com/show_bug.cgi?id=770207. The problem is due to a missing update of the gain setting. Signed-off-by: Jingjun Wu Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c index 8646ff2a55c..d8d73dbb578 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c +++ b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c @@ -520,6 +520,10 @@ void rtl92c_dm_write_dig(struct ieee80211_hw *hw) dm_digtable.cur_igvalue, dm_digtable.pre_igvalue, dm_digtable.backoff_val); + dm_digtable.cur_igvalue += 2; + if (dm_digtable.cur_igvalue > 0x3f) + dm_digtable.cur_igvalue = 0x3f; + if (dm_digtable.pre_igvalue != dm_digtable.cur_igvalue) { rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, 0x7f, dm_digtable.cur_igvalue); -- 2.39.5