From aa50f259d65603f40a82ef0d256a6a954a3db283 Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Sat, 31 Aug 2013 00:14:38 +0900 Subject: [PATCH] mmc: dw_mmc: fix the transfer termination in IDMAC mode In IDMAC mode EVENT_XFER_COMPLETE is set when RI/TI of last descriptor is done. So if errors are happened in the middle of data transfers, 'dw_mci_stop_dma' during error handing can be called and eventually prevents this flag to be set. This results in permanent wait for EVENT_XFER_COMPLETE in 'dw_mci_tasklet_func'. Therefore, if dma running is stopped forcibly, EVENT_XFER_COMPLETE should be set. Reported-by: Bing Zhao Signed-off-by: Doug Anderson Signed-off-by: Seungwon Jeon Tested-by: Alim Akhtar Acked-by: Jaehoon Chung Signed-off-by: Chris Ball --- drivers/mmc/host/dw_mmc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 05c239f96079..0a6a51238b7f 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -345,10 +345,10 @@ static void dw_mci_stop_dma(struct dw_mci *host) if (host->using_dma) { host->dma_ops->stop(host); host->dma_ops->cleanup(host); - } else { - /* Data transfer was stopped by the interrupt handler */ - set_bit(EVENT_XFER_COMPLETE, &host->pending_events); } + + /* Data transfer was stopped by the interrupt handler */ + set_bit(EVENT_XFER_COMPLETE, &host->pending_events); } static int dw_mci_get_dma_dir(struct mmc_data *data) -- 2.39.5