From acac596286bcadda964d0e15dbbd8bdebedcaa41 Mon Sep 17 00:00:00 2001 From: Hariprasad Shenai Date: Wed, 23 Dec 2015 22:47:13 +0530 Subject: [PATCH] cxgb4/cxgb4vf: Update Ingress padding boundary values for T6 adapter Ingress padding boundary values got changed for T6. T5: 0=32B 1=64B 2=128B 3=256B 4=512B 5=1024B 6=2048B 7=4096B T6: 0=8B 1=16B 2=32B 3=64B 4=128B 5=128B 6=256B 7=512B Updating the driver to set the correct boundary values in SGE_CONTROL to 32B. Also, need to take care of this fl alignment change when calculating the next packet offset. Signed-off-by: Hariprasad Shenai Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 1 + drivers/net/ethernet/chelsio/cxgb4/sge.c | 33 +--------- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 62 ++++++++++++++++++- .../net/ethernet/chelsio/cxgb4/t4_values.h | 3 + drivers/net/ethernet/chelsio/cxgb4vf/sge.c | 11 +++- 5 files changed, 76 insertions(+), 34 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h index eab57cf29aa1..5c193a5f564e 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h @@ -1256,6 +1256,7 @@ int t4_phy_fw_ver(struct adapter *adap, int *phy_fw_ver); int t4_fwcache(struct adapter *adap, enum fw_params_param_dev_fwcache op); int t4_fw_upgrade(struct adapter *adap, unsigned int mbox, const u8 *fw_data, unsigned int size, int force); +int t4_fl_pkt_align(struct adapter *adap); unsigned int t4_flash_cfg_addr(struct adapter *adapter); int t4_check_fw_version(struct adapter *adap); int t4_get_fw_version(struct adapter *adapter, u32 *vers); diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c index 5e3ffa73ee13..099b946f017f 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c @@ -3173,8 +3173,7 @@ static int t4_sge_init_soft(struct adapter *adap) int t4_sge_init(struct adapter *adap) { struct sge *s = &adap->sge; - u32 sge_control, sge_control2, sge_conm_ctrl; - unsigned int ingpadboundary, ingpackboundary; + u32 sge_control, sge_conm_ctrl; int ret, egress_threshold; /* @@ -3185,35 +3184,7 @@ int t4_sge_init(struct adapter *adap) s->pktshift = PKTSHIFT_G(sge_control); s->stat_len = (sge_control & EGRSTATUSPAGESIZE_F) ? 128 : 64; - /* T4 uses a single control field to specify both the PCIe Padding and - * Packing Boundary. T5 introduced the ability to specify these - * separately. The actual Ingress Packet Data alignment boundary - * within Packed Buffer Mode is the maximum of these two - * specifications. (Note that it makes no real practical sense to - * have the Pading Boudary be larger than the Packing Boundary but you - * could set the chip up that way and, in fact, legacy T4 code would - * end doing this because it would initialize the Padding Boundary and - * leave the Packing Boundary initialized to 0 (16 bytes).) - */ - ingpadboundary = 1 << (INGPADBOUNDARY_G(sge_control) + - INGPADBOUNDARY_SHIFT_X); - if (is_t4(adap->params.chip)) { - s->fl_align = ingpadboundary; - } else { - /* T5 has a different interpretation of one of the PCIe Packing - * Boundary values. - */ - sge_control2 = t4_read_reg(adap, SGE_CONTROL2_A); - ingpackboundary = INGPACKBOUNDARY_G(sge_control2); - if (ingpackboundary == INGPACKBOUNDARY_16B_X) - ingpackboundary = 16; - else - ingpackboundary = 1 << (ingpackboundary + - INGPACKBOUNDARY_SHIFT_X); - - s->fl_align = max(ingpadboundary, ingpackboundary); - } - + s->fl_align = t4_fl_pkt_align(adap); ret = t4_sge_init_soft(adap); if (ret < 0) return ret; diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 5266011e530b..42754c06b7d8 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -6096,6 +6096,59 @@ int t4_fw_upgrade(struct adapter *adap, unsigned int mbox, return t4_fw_restart(adap, mbox, reset); } +/** + * t4_fl_pkt_align - return the fl packet alignment + * @adap: the adapter + * + * T4 has a single field to specify the packing and padding boundary. + * T5 onwards has separate fields for this and hence the alignment for + * next packet offset is maximum of these two. + * + */ +int t4_fl_pkt_align(struct adapter *adap) +{ + u32 sge_control, sge_control2; + unsigned int ingpadboundary, ingpackboundary, fl_align, ingpad_shift; + + sge_control = t4_read_reg(adap, SGE_CONTROL_A); + + /* T4 uses a single control field to specify both the PCIe Padding and + * Packing Boundary. T5 introduced the ability to specify these + * separately. The actual Ingress Packet Data alignment boundary + * within Packed Buffer Mode is the maximum of these two + * specifications. (Note that it makes no real practical sense to + * have the Pading Boudary be larger than the Packing Boundary but you + * could set the chip up that way and, in fact, legacy T4 code would + * end doing this because it would initialize the Padding Boundary and + * leave the Packing Boundary initialized to 0 (16 bytes).) + * Padding Boundary values in T6 starts from 8B, + * where as it is 32B for T4 and T5. + */ + if (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5) + ingpad_shift = INGPADBOUNDARY_SHIFT_X; + else + ingpad_shift = T6_INGPADBOUNDARY_SHIFT_X; + + ingpadboundary = 1 << (INGPADBOUNDARY_G(sge_control) + ingpad_shift); + + fl_align = ingpadboundary; + if (!is_t4(adap->params.chip)) { + /* T5 has a weird interpretation of one of the PCIe Packing + * Boundary values. No idea why ... + */ + sge_control2 = t4_read_reg(adap, SGE_CONTROL2_A); + ingpackboundary = INGPACKBOUNDARY_G(sge_control2); + if (ingpackboundary == INGPACKBOUNDARY_16B_X) + ingpackboundary = 16; + else + ingpackboundary = 1 << (ingpackboundary + + INGPACKBOUNDARY_SHIFT_X); + + fl_align = max(ingpadboundary, ingpackboundary); + } + return fl_align; +} + /** * t4_fixup_host_params - fix up host-dependent parameters * @adap: the adapter @@ -6114,6 +6167,7 @@ int t4_fixup_host_params(struct adapter *adap, unsigned int page_size, unsigned int stat_len = cache_line_size > 64 ? 128 : 64; unsigned int fl_align = cache_line_size < 32 ? 32 : cache_line_size; unsigned int fl_align_log = fls(fl_align) - 1; + unsigned int ingpad; t4_write_reg(adap, SGE_HOST_PAGE_SIZE_A, HOSTPAGESIZEPF0_V(sge_hps) | @@ -6161,10 +6215,16 @@ int t4_fixup_host_params(struct adapter *adap, unsigned int page_size, fl_align = 64; fl_align_log = 6; } + + if (is_t5(adap->params.chip)) + ingpad = INGPCIEBOUNDARY_32B_X; + else + ingpad = T6_INGPADBOUNDARY_32B_X; + t4_set_reg_field(adap, SGE_CONTROL_A, INGPADBOUNDARY_V(INGPADBOUNDARY_M) | EGRSTATUSPAGESIZE_F, - INGPADBOUNDARY_V(INGPCIEBOUNDARY_32B_X) | + INGPADBOUNDARY_V(ingpad) | EGRSTATUSPAGESIZE_V(stat_len != 64)); t4_set_reg_field(adap, SGE_CONTROL2_A, INGPACKBOUNDARY_V(INGPACKBOUNDARY_M), diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_values.h b/drivers/net/ethernet/chelsio/cxgb4/t4_values.h index 7bdee3bf75ec..a5231fa771db 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_values.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_values.h @@ -53,6 +53,9 @@ #define INGPADBOUNDARY_SHIFT_X 5 +#define T6_INGPADBOUNDARY_SHIFT_X 3 +#define T6_INGPADBOUNDARY_32B_X 2 + /* CONTROL2 register */ #define INGPACKBOUNDARY_SHIFT_X 5 #define INGPACKBOUNDARY_16B_X 0 diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c index fa3786a9d30e..6528231d8a59 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c @@ -2607,7 +2607,7 @@ int t4vf_sge_init(struct adapter *adapter) u32 fl0 = sge_params->sge_fl_buffer_size[0]; u32 fl1 = sge_params->sge_fl_buffer_size[1]; struct sge *s = &adapter->sge; - unsigned int ingpadboundary, ingpackboundary; + unsigned int ingpadboundary, ingpackboundary, ingpad_shift; /* * Start by vetting the basic SGE parameters which have been set up by @@ -2642,9 +2642,16 @@ int t4vf_sge_init(struct adapter *adapter) * could set the chip up that way and, in fact, legacy T4 code would * end doing this because it would initialize the Padding Boundary and * leave the Packing Boundary initialized to 0 (16 bytes).) + * Padding Boundary values in T6 starts from 8B, + * where as it is 32B for T4 and T5. */ + if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5) + ingpad_shift = INGPADBOUNDARY_SHIFT_X; + else + ingpad_shift = T6_INGPADBOUNDARY_SHIFT_X; + ingpadboundary = 1 << (INGPADBOUNDARY_G(sge_params->sge_control) + - INGPADBOUNDARY_SHIFT_X); + ingpad_shift); if (is_t4(adapter->params.chip)) { s->fl_align = ingpadboundary; } else { -- 2.39.5