From ad3613f4798e229c8885b924c88e17ab85fef96a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 11 Jul 2007 11:10:42 +0100 Subject: [PATCH] [ARM] 4469/1: ANUBIS: large page NAND support Add support for the partition layour used on the revision B modules which ship with large page NAND flash as default. The differnce between the old and new layouts is that the large page devices use 128KiB blocks, so the initial loader partition now ends at 128KiB boundary pushing the begining of partition 1 up. The rest of the partitions are in the same place as the small page NAND devices. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2440/mach-anubis.c | 36 +++++++++++++++++++++++++++-- 1 file changed, 34 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 53675aa516f3..29c163d300d4 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -158,6 +158,29 @@ static struct mtd_partition anubis_default_nand_part[] = { } }; +static struct mtd_partition anubis_default_nand_part_large[] = { + [0] = { + .name = "Boot Agent", + .size = SZ_128K, + .offset = 0, + }, + [1] = { + .name = "/boot", + .size = SZ_4M - SZ_128K, + .offset = SZ_128K, + }, + [2] = { + .name = "user1", + .offset = SZ_4M, + .size = SZ_32M - SZ_4M, + }, + [3] = { + .name = "user2", + .offset = SZ_32M, + .size = MTDPART_SIZ_FULL, + } +}; + /* the Anubis has 3 selectable slots for nand-flash, the two * on-board chip areas, as well as the external slot. * @@ -409,8 +432,17 @@ static void __init anubis_map_io(void) s3c24xx_init_clocks(0); s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); - /* ensure that the GPIO is setup */ - s3c2410_gpio_setpin(S3C2410_GPA0, 1); + /* check for the newer revision boards with large page nand */ + + if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) { + printk(KERN_INFO "ANUBIS-B detected (revision %d)\n", + __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK); + anubis_nand_sets[0].partitions = anubis_default_nand_part_large; + anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large); + } else { + /* ensure that the GPIO is setup */ + s3c2410_gpio_setpin(S3C2410_GPA0, 1); + } } static void __init anubis_init(void) -- 2.39.5