From afbca95f95f2bf7283a72670c24c1f6de00b1cb5 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Mon, 19 Dec 2011 12:22:58 -0800 Subject: [PATCH] libertas: clean up scan thread handling The libertas scan thread expects priv->scan_req to be non-NULL. In theory, it should always be set. In practice, we've seen the following oops: [ 8363.067444] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 8363.067490] pgd = c0004000 [ 8363.078393] [00000004] *pgd=00000000 [ 8363.086711] Internal error: Oops: 17 [#1] PREEMPT [ 8363.091375] Modules linked in: fuse libertas_sdio libertas psmouse mousedev ov7670 mmp_camera joydev videobuf2_core videobuf2_dma_sg videobuf2_memops [last unloaded: scsi_wait_scan] [ 8363.107490] CPU: 0 Not tainted (3.0.0-gf7ccc69 #671) [ 8363.112799] PC is at lbs_scan_worker+0x108/0x5a4 [libertas] [ 8363.118326] LR is at 0x0 [ 8363.120836] pc : [] lr : [<00000000>] psr: 60000113 [ 8363.120845] sp : ee66bf48 ip : 00000000 fp : 00000000 [ 8363.120845] r10: ee2c2088 r9 : c04e2efc r8 : eef97005 [ 8363.132231] r7 : eee0716f r6 : ee2c02c0 r5 : ee2c2088 r4 : eee07160 [ 8363.137419] r3 : 00000000 r2 : a0000113 r1 : 00000001 r0 : eee07160 [ 8363.143896] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 8363.157630] Control: 10c5387d Table: 2e754019 DAC: 00000015 [ 8363.163334] Process kworker/u:1 (pid: 25, stack limit = 0xee66a2f8) While I've not found a smoking gun, there are two places that raised red flags for me. The first is in _internal_start_scan, when we queue up a scan; we first queue the worker, and then set priv->scan_req. There's theoretically a 50mS delay which should be plenty, but doing things that way just seems racy (and not in the good way). The second is in the scan worker thread itself. Depending on the state of priv->scan_channel, we cancel pending scan runs and then requeue a run in 300mS. We then send the scan command down to the hardware, sleep, and if we get scan results for all the desired channels, we set priv->scan_req to NULL. However, it that's happened in less than 300mS, what happens with the pending scan run? This patch addresses both of those concerns. With the patch applied, we have not seen the oops in the past two weeks. Signed-off-by: Andres Salomon Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/cfg.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index d1d84e0e30fc..a7cd311cb1b7 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -731,9 +731,11 @@ static void lbs_scan_worker(struct work_struct *work) le16_to_cpu(scan_cmd->hdr.size), lbs_ret_scan, 0); - if (priv->scan_channel >= priv->scan_req->n_channels) + if (priv->scan_channel >= priv->scan_req->n_channels) { /* Mark scan done */ + cancel_delayed_work(&priv->scan_work); lbs_scan_done(priv); + } /* Restart network */ if (carrier) @@ -762,12 +764,12 @@ static void _internal_start_scan(struct lbs_private *priv, bool internal, request->n_ssids, request->n_channels, request->ie_len); priv->scan_channel = 0; - queue_delayed_work(priv->work_thread, &priv->scan_work, - msecs_to_jiffies(50)); - priv->scan_req = request; priv->internal_scan = internal; + queue_delayed_work(priv->work_thread, &priv->scan_work, + msecs_to_jiffies(50)); + lbs_deb_leave(LBS_DEB_CFG80211); } -- 2.39.5