From b13db6bf539dce9dd5d0128c42269334e5e2d17e Mon Sep 17 00:00:00 2001 From: Saber Rezvani Date: Fri, 2 Dec 2016 01:35:42 +0330 Subject: [PATCH] staging: comedi: s626: use preferred kernel type u32 Fix the checkpatch.pl issue: CHECK: Prefer kernel type 'u32' over 'uint32_t' Signed-off-by: Saber Rezvani Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/s626.c | 58 +++++++++++++-------------- 1 file changed, 29 insertions(+), 29 deletions(-) diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c index baf997d25af8..0dd5fe286855 100644 --- a/drivers/staging/comedi/drivers/s626.c +++ b/drivers/staging/comedi/drivers/s626.c @@ -88,11 +88,11 @@ struct s626_private { * program */ struct s626_buffer_dma ana_buf; /* DMA buffer used to receive ADC data * and hold DAC data */ - uint32_t *dac_wbuf; /* pointer to logical adrs of DMA buffer + u32 *dac_wbuf; /* pointer to logical adrs of DMA buffer * used to hold DAC data */ u16 dacpol; /* image of DAC polarity register */ u8 trim_setpoint[12]; /* images of TrimDAC setpoints */ - uint32_t i2c_adrs; /* I2C device address for onboard EEPROM + u32 i2c_adrs; /* I2C device address for onboard EEPROM * (board rev dependent) */ }; @@ -241,7 +241,7 @@ static int s626_i2c_handshake_eoc(struct comedi_device *dev, return -EBUSY; } -static int s626_i2c_handshake(struct comedi_device *dev, uint32_t val) +static int s626_i2c_handshake(struct comedi_device *dev, u32 val) { unsigned int ctrl; int ret; @@ -357,7 +357,7 @@ static int s626_send_dac_eoc(struct comedi_device *dev, * channel 2. Assumes: (1) TSL2 slot records initialized, and (2) * dacpol contains valid target image. */ -static int s626_send_dac(struct comedi_device *dev, uint32_t val) +static int s626_send_dac(struct comedi_device *dev, u32 val) { struct s626_private *devpriv = dev->private; int ret; @@ -520,8 +520,8 @@ static int s626_set_dac(struct comedi_device *dev, { struct s626_private *devpriv = dev->private; u16 signmask; - uint32_t ws_image; - uint32_t val; + u32 ws_image; + u32 val; /* * Adjust DAC data polarity and set up Polarity Control Register image. @@ -575,9 +575,9 @@ static int s626_set_dac(struct comedi_device *dev, * (write to non-existent trimdac). */ val |= 0x00004000; /* Address the two main dual-DAC devices * (TSL's chip select enables target device). */ - val |= ((uint32_t)(chan & 1) << 15); /* Address the DAC channel + val |= ((u32)(chan & 1) << 15); /* Address the DAC channel * within the device. */ - val |= (uint32_t)dacdata; /* Include DAC setpoint data. */ + val |= (u32)dacdata; /* Include DAC setpoint data. */ return s626_send_dac(dev, val); } @@ -585,7 +585,7 @@ static int s626_write_trim_dac(struct comedi_device *dev, u8 logical_chan, u8 dac_data) { struct s626_private *devpriv = dev->private; - uint32_t chan; + u32 chan; /* * Save the new setpoint in case the application needs to read it back @@ -672,7 +672,7 @@ static void s626_set_latch_source(struct comedi_device *dev, * Write value into counter preload register. */ static void s626_preload(struct comedi_device *dev, - unsigned int chan, uint32_t value) + unsigned int chan, u32 value) { s626_debi_write(dev, S626_LP_CNTR(chan), value); s626_debi_write(dev, S626_LP_CNTR(chan) + 2, value >> 16); @@ -1196,7 +1196,7 @@ static bool s626_handle_eos_interrupt(struct comedi_device *dev) * first uint16_t in the buffer because it contains junk data * from the final ADC of the previous poll list scan. */ - uint32_t *readaddr = (uint32_t *)devpriv->ana_buf.logical_base + 1; + u32 *readaddr = (u32 *)devpriv->ana_buf.logical_base + 1; int i; /* get the data and hand it over to comedi */ @@ -1231,7 +1231,7 @@ static irqreturn_t s626_irq_handler(int irq, void *d) { struct comedi_device *dev = d; unsigned long flags; - uint32_t irqtype, irqstatus; + u32 irqtype, irqstatus; if (!dev->attached) return IRQ_NONE; @@ -1277,20 +1277,20 @@ static void s626_reset_adc(struct comedi_device *dev, u8 *ppl) struct s626_private *devpriv = dev->private; struct comedi_subdevice *s = dev->read_subdev; struct comedi_cmd *cmd = &s->async->cmd; - uint32_t *rps; - uint32_t jmp_adrs; + u32 *rps; + u32 jmp_adrs; u16 i; u16 n; - uint32_t local_ppl; + u32 local_ppl; /* Stop RPS program in case it is currently running */ s626_mc_disable(dev, S626_MC1_ERPS1, S626_P_MC1); /* Set starting logical address to write RPS commands. */ - rps = (uint32_t *)devpriv->rps_buf.logical_base; + rps = (u32 *)devpriv->rps_buf.logical_base; /* Initialize RPS instruction pointer */ - writel((uint32_t)devpriv->rps_buf.physical_base, + writel((u32)devpriv->rps_buf.physical_base, dev->mmio + S626_P_RPSADDR1); /* Construct RPS program in rps_buf DMA buffer */ @@ -1372,8 +1372,8 @@ static void s626_reset_adc(struct comedi_device *dev, u8 *ppl) * flushes the RPS' instruction prefetch pipeline. */ jmp_adrs = - (uint32_t)devpriv->rps_buf.physical_base + - (uint32_t)((unsigned long)rps - + (u32)devpriv->rps_buf.physical_base + + (u32)((unsigned long)rps - (unsigned long)devpriv-> rps_buf.logical_base); for (i = 0; i < (10 * S626_RPSCLK_PER_US / 2); i++) { @@ -1408,7 +1408,7 @@ static void s626_reset_adc(struct comedi_device *dev, u8 *ppl) /* Transfer ADC data from FB BUFFER 1 register to DMA buffer. */ *rps++ = S626_RPS_STREG | (S626_BUGFIX_STREG(S626_P_FB_BUFFER1) >> 2); - *rps++ = (uint32_t)devpriv->ana_buf.physical_base + + *rps++ = (u32)devpriv->ana_buf.physical_base + (devpriv->adc_items << 2); /* @@ -1452,7 +1452,7 @@ static void s626_reset_adc(struct comedi_device *dev, u8 *ppl) /* Transfer final ADC data from FB BUFFER 1 register to DMA buffer. */ *rps++ = S626_RPS_STREG | (S626_BUGFIX_STREG(S626_P_FB_BUFFER1) >> 2); - *rps++ = (uint32_t)devpriv->ana_buf.physical_base + + *rps++ = (u32)devpriv->ana_buf.physical_base + (devpriv->adc_items << 2); /* Indicate ADC scan loop is finished. */ @@ -1465,7 +1465,7 @@ static void s626_reset_adc(struct comedi_device *dev, u8 *ppl) /* Restart RPS program at its beginning. */ *rps++ = S626_RPS_JUMP; /* Branch to start of RPS program. */ - *rps++ = (uint32_t)devpriv->rps_buf.physical_base; + *rps++ = (u32)devpriv->rps_buf.physical_base; /* End of RPS program build */ } @@ -1491,8 +1491,8 @@ static int s626_ai_insn_read(struct comedi_device *dev, u16 chan = CR_CHAN(insn->chanspec); u16 range = CR_RANGE(insn->chanspec); u16 adc_spec = 0; - uint32_t gpio_image; - uint32_t tmp; + u32 gpio_image; + u32 tmp; int ret; int n; @@ -2248,7 +2248,7 @@ static int s626_initialize(struct comedi_device *dev) */ /* Physical start of RPS program */ - writel((uint32_t)devpriv->rps_buf.physical_base, + writel((u32)devpriv->rps_buf.physical_base, dev->mmio + S626_P_RPSADDR1); /* RPS program performs no explicit mem writes */ writel(0, dev->mmio + S626_P_RPSPAGE1); @@ -2318,16 +2318,16 @@ static int s626_initialize(struct comedi_device *dev) * enabled. */ phys_buf = devpriv->ana_buf.physical_base + - (S626_DAC_WDMABUF_OS * sizeof(uint32_t)); - writel((uint32_t)phys_buf, dev->mmio + S626_P_BASEA2_OUT); - writel((uint32_t)(phys_buf + sizeof(uint32_t)), + (S626_DAC_WDMABUF_OS * sizeof(u32)); + writel((u32)phys_buf, dev->mmio + S626_P_BASEA2_OUT); + writel((u32)(phys_buf + sizeof(u32)), dev->mmio + S626_P_PROTA2_OUT); /* * Cache Audio2's output DMA buffer logical address. This is * where DAC data is buffered for A2 output DMA transfers. */ - devpriv->dac_wbuf = (uint32_t *)devpriv->ana_buf.logical_base + + devpriv->dac_wbuf = (u32 *)devpriv->ana_buf.logical_base + S626_DAC_WDMABUF_OS; /* -- 2.39.5