From b26b4e91700ff45d033eeaac91597d6d479378a4 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 30 Jun 2016 03:48:51 +0200 Subject: [PATCH] iio: pressure: bmp280: add SPI interface driver This patch mimics the SPI functionality found in the misc driver in drivers/misc/bh085-spi.c to make it possible to reuse the existing BMP280/BMP180/BMP085 driver with all clients of the other driver. The adoption is straight-forward since like the other driver, it is a simple matter of using regmap. This driver is also so obviously inspired/copied from the old misc driver in drivers/misc/bmp085.c that I just took the liberty to add in the authors of the other drivers + self in the core driver file. The MISC driver also supports a variant named "BMP181" so include that here to be complete in comparison to the old driver. The bus mapping code for SPI was written by Akinobu Mita. Signed-off-by: Akinobu Mita Tested-by: Akinobu Mita Signed-off-by: Linus Walleij Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/Kconfig | 15 +++- drivers/iio/pressure/Makefile | 1 + drivers/iio/pressure/bmp280-core.c | 4 + drivers/iio/pressure/bmp280-spi.c | 123 +++++++++++++++++++++++++++++ 4 files changed, 140 insertions(+), 3 deletions(-) create mode 100644 drivers/iio/pressure/bmp280-spi.c diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index 3d0d311acb1d..d130cdc78f43 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -7,17 +7,20 @@ menu "Pressure sensors" config BMP280 tristate "Bosch Sensortec BMP180/BMP280 pressure sensor I2C driver" - depends on I2C + depends on (I2C || SPI_MASTER) depends on !(BMP085_I2C=y || BMP085_I2C=m) + depends on !(BMP085_SPI=y || BMP085_SPI=m) select REGMAP select BMP280_I2C if (I2C) + select BMP280_SPI if (SPI_MASTER) help Say yes here to build support for Bosch Sensortec BMP180 and BMP280 pressure and temperature sensors. Also supports the BE280 with an additional humidity sensor channel. - To compile this driver as a module, choose M here: the modules - will be called bmp280-i2c and bmp280. + To compile this driver as a module, choose M here: the core module + will be called bmp280 and you will also get bmp280-i2c for I2C + and/or bmp280-spi for SPI support. config BMP280_I2C tristate @@ -25,6 +28,12 @@ config BMP280_I2C depends on I2C select REGMAP_I2C +config BMP280_SPI + tristate + depends on BMP280 + depends on SPI_MASTER + select REGMAP + config HID_SENSOR_PRESS depends on HID_SENSOR_HUB select IIO_BUFFER diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile index 736f4305fe46..7f395bed5e88 100644 --- a/drivers/iio/pressure/Makefile +++ b/drivers/iio/pressure/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_BMP280) += bmp280.o bmp280-objs := bmp280-core.o bmp280-regmap.o obj-$(CONFIG_BMP280_I2C) += bmp280-i2c.o +obj-$(CONFIG_BMP280_SPI) += bmp280-spi.o obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o obj-$(CONFIG_HP03) += hp03.o obj-$(CONFIG_MPL115) += mpl115.o diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index f1b5f8c0ac8c..43bd0b07619c 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -1,5 +1,9 @@ /* + * Copyright (c) 2010 Christoph Mair + * Copyright (c) 2012 Bosch Sensortec GmbH + * Copyright (c) 2012 Unixphere AB * Copyright (c) 2014 Intel Corporation + * Copyright (c) 2016 Linus Walleij * * Driver for Bosch Sensortec BMP180 and BMP280 digital pressure sensor. * diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c new file mode 100644 index 000000000000..216e64b682bf --- /dev/null +++ b/drivers/iio/pressure/bmp280-spi.c @@ -0,0 +1,123 @@ +/* + * SPI interface for the BMP280 driver + * + * Inspired by the older BMP085 driver drivers/misc/bmp085-spi.c + */ +#include +#include +#include +#include + +#include "bmp280.h" + +static int bmp280_regmap_spi_write(void *context, const void *data, + size_t count) +{ + struct device *dev = context; + struct spi_device *spi = to_spi_device(dev); + u8 buf[2]; + + memcpy(buf, data, 2); + /* + * The SPI register address (= full register address without bit 7) and + * the write command (bit7 = RW = '0') + */ + buf[0] &= ~0x80; + + return spi_write_then_read(spi, buf, 2, NULL, 0); +} + +static int bmp280_regmap_spi_read(void *context, const void *reg, + size_t reg_size, void *val, size_t val_size) +{ + struct device *dev = context; + struct spi_device *spi = to_spi_device(dev); + + return spi_write_then_read(spi, reg, reg_size, val, val_size); +} + +static struct regmap_bus bmp280_regmap_bus = { + .write = bmp280_regmap_spi_write, + .read = bmp280_regmap_spi_read, + .reg_format_endian_default = REGMAP_ENDIAN_BIG, + .val_format_endian_default = REGMAP_ENDIAN_BIG, +}; + +static int bmp280_spi_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + struct regmap *regmap; + const struct regmap_config *regmap_config; + int ret; + + spi->bits_per_word = 8; + ret = spi_setup(spi); + if (ret < 0) { + dev_err(&spi->dev, "spi_setup failed!\n"); + return ret; + } + + switch (id->driver_data) { + case BMP180_CHIP_ID: + regmap_config = &bmp180_regmap_config; + break; + case BMP280_CHIP_ID: + case BME280_CHIP_ID: + regmap_config = &bmp280_regmap_config; + break; + default: + return -EINVAL; + } + + regmap = devm_regmap_init(&spi->dev, + &bmp280_regmap_bus, + &spi->dev, + regmap_config); + if (IS_ERR(regmap)) { + dev_err(&spi->dev, "failed to allocate register map\n"); + return PTR_ERR(regmap); + } + + return bmp280_common_probe(&spi->dev, + regmap, + id->driver_data, + id->name); +} + +static int bmp280_spi_remove(struct spi_device *spi) +{ + return bmp280_common_remove(&spi->dev); +} + +static const struct of_device_id bmp280_of_spi_match[] = { + { .compatible = "bosch,bmp085", }, + { .compatible = "bosch,bmp180", }, + { .compatible = "bosch,bmp181", }, + { .compatible = "bosch,bmp280", }, + { .compatible = "bosch,bme280", }, + { }, +}; +MODULE_DEVICE_TABLE(of, bmp280_of_spi_match); + +static const struct spi_device_id bmp280_spi_id[] = { + { "bmp180", BMP180_CHIP_ID }, + { "bmp181", BMP180_CHIP_ID }, + { "bmp280", BMP280_CHIP_ID }, + { "bme280", BME280_CHIP_ID }, + { } +}; +MODULE_DEVICE_TABLE(spi, bmp280_spi_id); + +static struct spi_driver bmp280_spi_driver = { + .driver = { + .name = "bmp280", + .of_match_table = bmp280_of_spi_match, + }, + .id_table = bmp280_spi_id, + .probe = bmp280_spi_probe, + .remove = bmp280_spi_remove, +}; +module_spi_driver(bmp280_spi_driver); + +MODULE_DESCRIPTION("BMP280 SPI bus driver"); +MODULE_LICENSE("GPL"); -- 2.39.5