From b3d42bf18784607b90b0661ac43f410713ff428b Mon Sep 17 00:00:00 2001 From: Xenia Ragiadakou Date: Thu, 6 Jun 2013 16:40:51 +0300 Subject: [PATCH] staging: rtl8192u: fix read_nic_* functions read_nic_*() functions are defined in r8192U_core.c. They call internally usb_control_msg() to read the nic registers and return the value read. Following a remark made by Dan Carpenter, if usb_control_msg() fails, the value returned will be invalid. To accommodate for this, this patch changes the functions to take a pointer as argument to set the value read and return 0 on success and the error status on failure, so that callers of read_nic_*() can check the return status. Some other fixes introduced in read_nic_*() functions are: The expressions (1< Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192u/r8180_93cx6.c | 40 +++--- drivers/staging/rtl8192u/r8192U.h | 8 +- drivers/staging/rtl8192u/r8192U_core.c | 134 ++++++++++++--------- drivers/staging/rtl8192u/r8192U_dm.c | 46 +++---- drivers/staging/rtl8192u/r8192U_hw.h | 9 +- drivers/staging/rtl8192u/r8192U_wx.c | 2 +- drivers/staging/rtl8192u/r819xU_firmware.c | 8 +- drivers/staging/rtl8192u/r819xU_phy.c | 64 +++++----- 8 files changed, 172 insertions(+), 139 deletions(-) diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c b/drivers/staging/rtl8192u/r8180_93cx6.c index 77e7b7791c91..d2199986d132 100644 --- a/drivers/staging/rtl8192u/r8180_93cx6.c +++ b/drivers/staging/rtl8192u/r8180_93cx6.c @@ -22,13 +22,15 @@ void eprom_cs(struct net_device *dev, short bit) { + u8 cmdreg; + + read_nic_byte_E(dev, EPROM_CMD, &cmdreg); if (bit) - write_nic_byte_E(dev, EPROM_CMD, - (1<udev; status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL8187_REQ_GET_REGS, RTL8187_REQT_READ, - indx|0xfe00, 0, &data, 1, HZ / 2); + indx|0xfe00, 0, data, 1, HZ / 2); - if (status < 0) - netdev_err(dev, "read_nic_byte_E TimeOut! status: %d\n", status); + if (status < 0) { + netdev_err(dev, "%s failure status: %d\n", __func__, status); + return status; + } - return data; + return 0; } //as 92U has extend page from 4 to 16, so modify functions below. void write_nic_byte(struct net_device *dev, int indx, u8 data) @@ -349,28 +353,28 @@ void write_nic_dword(struct net_device *dev, int indx, u32 data) -u8 read_nic_byte(struct net_device *dev, int indx) +int read_nic_byte(struct net_device *dev, int indx, u8 *data) { - u8 data; int status; struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); struct usb_device *udev = priv->udev; status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL8187_REQ_GET_REGS, RTL8187_REQT_READ, - (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 1, HZ / 2); + (indx&0xff)|0xff00, (indx>>8)&0x0f, data, 1, HZ / 2); - if (status < 0) - netdev_err(dev, "read_nic_byte TimeOut! status: %d\n", status); + if (status < 0) { + netdev_err(dev, "%s failure status: %d\n", __func__, status); + return status; + } - return data; + return 0; } -u16 read_nic_word(struct net_device *dev, int indx) +int read_nic_word(struct net_device *dev, int indx, u16 *data) { - u16 data; int status; struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); struct usb_device *udev = priv->udev; @@ -378,34 +382,36 @@ u16 read_nic_word(struct net_device *dev, int indx) status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL8187_REQ_GET_REGS, RTL8187_REQT_READ, (indx&0xff)|0xff00, (indx>>8)&0x0f, - &data, 2, HZ / 2); + data, 2, HZ / 2); - if (status < 0) - netdev_err(dev, "read_nic_word TimeOut! status: %d\n", status); + if (status < 0) { + netdev_err(dev, "%s failure status: %d\n", __func__, status); + return status; + } - return data; + return 0; } -u16 read_nic_word_E(struct net_device *dev, int indx) +int read_nic_word_E(struct net_device *dev, int indx, u16 *data) { - u16 data; int status; struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); struct usb_device *udev = priv->udev; status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL8187_REQ_GET_REGS, RTL8187_REQT_READ, - indx|0xfe00, 0, &data, 2, HZ / 2); + indx|0xfe00, 0, data, 2, HZ / 2); - if (status < 0) - netdev_err(dev, "read_nic_word TimeOut! status: %d\n", status); + if (status < 0) { + netdev_err(dev, "%s failure status: %d\n", __func__, status); + return status; + } - return data; + return 0; } -u32 read_nic_dword(struct net_device *dev, int indx) +int read_nic_dword(struct net_device *dev, int indx, u32 *data) { - u32 data; int status; struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); @@ -414,12 +420,14 @@ u32 read_nic_dword(struct net_device *dev, int indx) status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL8187_REQ_GET_REGS, RTL8187_REQT_READ, (indx&0xff)|0xff00, (indx>>8)&0x0f, - &data, 4, HZ / 2); + data, 4, HZ / 2); - if (status < 0) - netdev_err(dev, "read_nic_dword TimeOut! status:%d\n", status); + if (status < 0) { + netdev_err(dev, "%s failure status: %d\n", __func__, status); + return status; + } - return data; + return 0; } /* u8 read_phy_cck(struct net_device *dev, u8 adr); */ @@ -465,30 +473,37 @@ static int proc_get_registers(struct seq_file *m, void *v) { struct net_device *dev = m->private; int i, n, max = 0xff; + u8 byte_rd; seq_puts(m, "\n####################page 0##################\n "); for (n = 0; n <= max;) { seq_printf(m, "\nD: %2x > ", n); - for (i = 0; i < 16 && n <= max; i++, n++) - seq_printf(m, "%2x ", read_nic_byte(dev, 0x000|n)); + for (i = 0; i < 16 && n <= max; i++, n++) { + read_nic_byte(dev, 0x000|n, &byte_rd); + seq_printf(m, "%2x ", byte_rd); + } } seq_puts(m, "\n####################page 1##################\n "); for (n = 0; n <= max;) { seq_printf(m, "\nD: %2x > ", n); - for (i = 0; i < 16 && n <= max; i++, n++) - seq_printf(m, "%2x ", read_nic_byte(dev, 0x100|n)); + for (i = 0; i < 16 && n <= max; i++, n++) { + read_nic_byte(dev, 0x100|n, &byte_rd); + seq_printf(m, "%2x ", byte_rd); + } } seq_puts(m, "\n####################page 3##################\n "); for (n = 0; n <= max;) { seq_printf(m, "\nD: %2x > ", n); - for (i = 0; i < 16 && n <= max; i++, n++) - seq_printf(m, "%2x ", read_nic_byte(dev, 0x300|n)); + for (i = 0; i < 16 && n <= max; i++, n++) { + read_nic_byte(dev, 0x300|n, &byte_rd); + seq_printf(m, "%2x ", byte_rd); + } } seq_putc(m, '\n'); @@ -683,11 +698,11 @@ void dump_eprom(struct net_device *dev) void rtl8192_set_mode(struct net_device *dev, int mode) { u8 ecmd; - ecmd = read_nic_byte(dev, EPROM_CMD); + read_nic_byte(dev, EPROM_CMD, &ecmd); ecmd = ecmd & ~EPROM_CMD_OPERATING_MODE_MASK; ecmd = ecmd | (mode<iw_mode == IW_MODE_INFRA || ieee->iw_mode == IW_MODE_ADHOC) { u32 reg = 0; - reg = read_nic_dword(dev, RCR); + read_nic_dword(dev, RCR, ®); if (priv->ieee80211->state == IEEE80211_LINKED) priv->ReceiveConfig = reg |= RCR_CBSSID; else @@ -2544,7 +2555,7 @@ static void rtl8192_get_eeprom_size(struct net_device *dev) u16 curCR = 0; struct r8192_priv *priv = ieee80211_priv(dev); RT_TRACE(COMP_EPROM, "===========>%s()\n", __func__); - curCR = read_nic_word_E(dev, EPROM_CMD); + read_nic_word_E(dev, EPROM_CMD, &curCR); RT_TRACE(COMP_EPROM, "read from Reg EPROM_CMD(%x):%x\n", EPROM_CMD, curCR); //whether need I consider BIT5? priv->epromtype = (curCR & Cmd9346CR_9356SEL) ? EPROM_93c56 : EPROM_93c46; @@ -2896,7 +2907,7 @@ void rtl8192_hwconfig(struct net_device *dev) ratr_value &= ~(RATE_ALL_OFDM_2SS); write_nic_dword(dev, RATR0, ratr_value); write_nic_byte(dev, UFWP, 1); - regTmp = read_nic_byte(dev, 0x313); + read_nic_byte(dev, 0x313, ®Tmp); regRRSR = ((regTmp) << 24) | (regRRSR & 0x00ffffff); write_nic_dword(dev, RRSR, regRRSR); @@ -2925,6 +2936,7 @@ bool rtl8192_adapter_start(struct net_device *dev) u32 dwRegRead = 0; bool init_status = true; u8 SECR_value = 0x0; + u8 tmp; RT_TRACE(COMP_INIT, "====>%s()\n", __func__); priv->Rf_Mode = RF_OP_By_SW_3wire; //for ASIC power on sequence @@ -2938,7 +2950,7 @@ bool rtl8192_adapter_start(struct net_device *dev) priv->pFirmware->firmware_status = FW_STATUS_0_INIT; //config CPUReset Register //Firmware Reset or not? - dwRegRead = read_nic_dword(dev, CPU_GEN); + read_nic_dword(dev, CPU_GEN, &dwRegRead); if (priv->pFirmware->firmware_status == FW_STATUS_0_INIT) dwRegRead |= CPU_GEN_SYSTEM_RESET; //do nothing here? else if (priv->pFirmware->firmware_status == FW_STATUS_5_READY) @@ -2953,7 +2965,7 @@ bool rtl8192_adapter_start(struct net_device *dev) //Loopback mode or not priv->LoopbackMode = RTL819xU_NO_LOOPBACK; - dwRegRead = read_nic_dword(dev, CPU_GEN); + read_nic_dword(dev, CPU_GEN, &dwRegRead); if (priv->LoopbackMode == RTL819xU_NO_LOOPBACK) dwRegRead = ((dwRegRead & CPU_GEN_NO_LOOPBACK_MSK) | CPU_GEN_NO_LOOPBACK_SET); else if (priv->LoopbackMode == RTL819xU_MAC_LOOPBACK) @@ -2967,7 +2979,8 @@ bool rtl8192_adapter_start(struct net_device *dev) udelay(500); //xiong add for new bitfile:usb suspend reset pin set to 1. //do we need? - write_nic_byte_E(dev, 0x5f, (read_nic_byte_E(dev, 0x5f)|0x20)); + read_nic_byte_E(dev, 0x5f, &tmp); + write_nic_byte_E(dev, 0x5f, tmp|0x20); //Set Hardware rtl8192_hwconfig(dev); @@ -3095,7 +3108,8 @@ bool rtl8192_adapter_start(struct net_device *dev) if (priv->ResetProgress == RESET_TYPE_NORESET) { //if D or C cut - u8 tmpvalue = read_nic_byte(dev, 0x301); + u8 tmpvalue; + read_nic_byte(dev, 0x301, &tmpvalue); if (tmpvalue == 0x03) { priv->bDcut = TRUE; RT_TRACE(COMP_POWER_TRACKING, "D-cut\n"); @@ -3156,8 +3170,9 @@ static struct net_device_stats *rtl8192_stats(struct net_device *dev) bool HalTxCheckStuck819xUsb(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); - u16 RegTxCounter = read_nic_word(dev, 0x128); + u16 RegTxCounter; bool bStuck = FALSE; + read_nic_word(dev, 0x128, &RegTxCounter); RT_TRACE(COMP_RESET, "%s():RegTxCounter is %d,TxCounter is %d\n", __func__, RegTxCounter, priv->TxCounter); if (priv->TxCounter == RegTxCounter) bStuck = TRUE; @@ -3204,10 +3219,11 @@ RESET_TYPE TxCheckStuck(struct net_device *dev) bool HalRxCheckStuck819xUsb(struct net_device *dev) { - u16 RegRxCounter = read_nic_word(dev, 0x130); + u16 RegRxCounter; struct r8192_priv *priv = ieee80211_priv(dev); bool bStuck = FALSE; static u8 rx_chk_cnt; + read_nic_word(dev, 0x130, &RegRxCounter); RT_TRACE(COMP_RESET, "%s(): RegRxCounter is %d,RxCounter is %d\n", __func__, RegRxCounter, priv->RxCounter); // If rssi is small, we should check rx for long time because of bad rx. // or maybe it will continuous silent reset every 2 seconds. @@ -3494,7 +3510,7 @@ void CAM_read_entry(struct net_device *dev, u32 iIndex) //Check polling bit is clear while ((i--) >= 0) { - ulStatus = read_nic_dword(dev, RWCAM); + read_nic_dword(dev, RWCAM, &ulStatus); if (ulStatus & BIT31) continue; else @@ -3502,7 +3518,7 @@ void CAM_read_entry(struct net_device *dev, u32 iIndex) } write_nic_dword(dev, RWCAM, target_command); RT_TRACE(COMP_SEC, "CAM_read_entry(): WRITE A0: %x \n", target_command); - target_content = read_nic_dword(dev, RCAMO); + read_nic_dword(dev, RCAMO, &target_content); RT_TRACE(COMP_SEC, "CAM_read_entry(): WRITE A8: %x \n", target_content); } printk("\n"); diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c index c591476ee3c3..a6e4c37d9c78 100644 --- a/drivers/staging/rtl8192u/r8192U_dm.c +++ b/drivers/staging/rtl8192u/r8192U_dm.c @@ -480,7 +480,7 @@ static void dm_check_rate_adaptive(struct net_device *dev) // // Check whether updating of RATR0 is required // - currentRATR = read_nic_dword(dev, RATR0); + read_nic_dword(dev, RATR0, ¤tRATR); if(targetRATR != currentRATR) { u32 ratr_value; @@ -634,7 +634,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev) //DbgPrint("hi, vivi, strange\n"); for(i = 0;i <= 30; i++) { - Pwr_Flag = read_nic_byte(dev, 0x1ba); + read_nic_byte(dev, 0x1ba, &Pwr_Flag); if (Pwr_Flag == 0) { @@ -642,9 +642,9 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev) continue; } #ifdef RTL8190P - Avg_TSSI_Meas = read_nic_word(dev, 0x1bc); + read_nic_word(dev, 0x1bc, &Avg_TSSI_Meas); #else - Avg_TSSI_Meas = read_nic_word(dev, 0x13c); + read_nic_word(dev, 0x13c, &Avg_TSSI_Meas); #endif if(Avg_TSSI_Meas == 0) { @@ -655,12 +655,12 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev) for(k = 0;k < 5; k++) { #ifdef RTL8190P - tmp_report[k] = read_nic_byte(dev, 0x1d8+k); + read_nic_byte(dev, 0x1d8+k, &tmp_report[k]); #else if(k !=4) - tmp_report[k] = read_nic_byte(dev, 0x134+k); + read_nic_byte(dev, 0x134+k, &tmp_report[k]); else - tmp_report[k] = read_nic_byte(dev, 0x13e); + read_nic_byte(dev, 0x13e, &tmp_report[k]); #endif RT_TRACE(COMP_POWER_TRACKING, "TSSI_report_value = %d\n", tmp_report[k]); } @@ -2397,6 +2397,7 @@ static void dm_initial_gain( u8 initial_gain=0; static u8 initialized, force_write; static u32 reset_cnt; + u8 tmp; if(dm_digtable.dig_algorithm_switch) { @@ -2437,7 +2438,8 @@ static void dm_initial_gain( reset_cnt = priv->reset_count; } - if(dm_digtable.pre_ig_value != read_nic_byte(dev, rOFDM0_XAAGCCore1)) + read_nic_byte(dev, rOFDM0_XAAGCCore1, &tmp); + if (dm_digtable.pre_ig_value != tmp) force_write = 1; { @@ -2727,7 +2729,8 @@ static void dm_check_edca_turbo( // TODO: Modified this part and try to set acm control in only 1 IO processing!! PACI_AIFSN pAciAifsn = (PACI_AIFSN)&(qos_parameters->aifs[0]); - u8 AcmCtrl = read_nic_byte(dev, AcmHwCtrl); + u8 AcmCtrl; + read_nic_byte(dev, AcmHwCtrl, &AcmCtrl); if(pAciAifsn->f.ACM) { // ACM bit is 1. AcmCtrl |= AcmHw_BeqEn; @@ -2881,7 +2884,7 @@ static void dm_check_pbc_gpio(struct net_device *dev) u8 tmp1byte; - tmp1byte = read_nic_byte(dev,GPI); + read_nic_byte(dev, GPI, &tmp1byte); if(tmp1byte == 0xff) return; @@ -2933,7 +2936,7 @@ extern void dm_gpio_change_rf_callback(struct work_struct *work) { // 0x108 GPIO input register is read only //set 0x108 B1= 1: RF-ON; 0: RF-OFF. - tmp1byte = read_nic_byte(dev,GPI); + read_nic_byte(dev, GPI, &tmp1byte); eRfPowerStateToSet = (tmp1byte&BIT1) ? eRfOn : eRfOff; @@ -2996,7 +2999,7 @@ extern void dm_rf_pathcheck_workitemcallback(struct work_struct *work) /* 2008/01/30 MH After discussing with SD3 Jerry, 0xc04/0xd04 register will always be the same. We only read 0xc04 now. */ - rfpath = read_nic_byte(dev, 0xc04); + read_nic_byte(dev, 0xc04, &rfpath); // Check Bit 0-3, it means if RF A-D is enabled. for (i = 0; i < RF90_PATH_MAX; i++) @@ -3052,12 +3055,13 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev) if(!cck_Rx_Path_initialized) { - DM_RxPathSelTable.cck_Rx_path = (read_nic_byte(dev, 0xa07)&0xf); + read_nic_byte(dev, 0xa07, &DM_RxPathSelTable.cck_Rx_path); + DM_RxPathSelTable.cck_Rx_path &= 0xf; cck_Rx_Path_initialized = 1; } - DM_RxPathSelTable.disabledRF = 0xf; - DM_RxPathSelTable.disabledRF &= ~(read_nic_byte(dev, 0xc04)); + read_nic_byte(dev, 0xc04, &DM_RxPathSelTable.disabledRF); + DM_RxPathSelTable.disabledRF = ~DM_RxPathSelTable.disabledRF & 0xf; if(priv->ieee80211->mode == WIRELESS_MODE_B) { @@ -3731,17 +3735,17 @@ extern void dm_shadow_init(struct net_device *dev) for (page = 0; page < 5; page++) for (offset = 0; offset < 256; offset++) { - dm_shadow[page][offset] = read_nic_byte(dev, offset+page*256); + read_nic_byte(dev, offset+page*256, &dm_shadow[page][offset]); //DbgPrint("P-%d/O-%02x=%02x\r\n", page, offset, DM_Shadow[page][offset]); } for (page = 8; page < 11; page++) for (offset = 0; offset < 256; offset++) - dm_shadow[page][offset] = read_nic_byte(dev, offset+page*256); + read_nic_byte(dev, offset+page*256, &dm_shadow[page][offset]); for (page = 12; page < 15; page++) for (offset = 0; offset < 256; offset++) - dm_shadow[page][offset] = read_nic_byte(dev, offset+page*256); + read_nic_byte(dev, offset+page*256, &dm_shadow[page][offset]); } /* dm_shadow_init */ @@ -3858,14 +3862,14 @@ static void dm_check_txrateandretrycount(struct net_device *dev) struct ieee80211_device *ieee = priv->ieee80211; //for 11n tx rate // priv->stats.CurrentShowTxate = read_nic_byte(dev, Current_Tx_Rate_Reg); - ieee->softmac_stats.CurrentShowTxate = read_nic_byte(dev, Current_Tx_Rate_Reg); + read_nic_byte(dev, Current_Tx_Rate_Reg, &ieee->softmac_stats.CurrentShowTxate); //printk("=============>tx_rate_reg:%x\n", ieee->softmac_stats.CurrentShowTxate); //for initial tx rate // priv->stats.last_packet_rate = read_nic_byte(dev, Initial_Tx_Rate_Reg); - ieee->softmac_stats.last_packet_rate = read_nic_byte(dev ,Initial_Tx_Rate_Reg); + read_nic_byte(dev, Initial_Tx_Rate_Reg, &ieee->softmac_stats.last_packet_rate); //for tx tx retry count // priv->stats.txretrycount = read_nic_dword(dev, Tx_Retry_Count_Reg); - ieee->softmac_stats.txretrycount = read_nic_dword(dev, Tx_Retry_Count_Reg); + read_nic_dword(dev, Tx_Retry_Count_Reg, &ieee->softmac_stats.txretrycount); } static void dm_send_rssi_tofw(struct net_device *dev) diff --git a/drivers/staging/rtl8192u/r8192U_hw.h b/drivers/staging/rtl8192u/r8192U_hw.h index 15b0423356f8..7e612aa56fa4 100644 --- a/drivers/staging/rtl8192u/r8192U_hw.h +++ b/drivers/staging/rtl8192u/r8192U_hw.h @@ -388,10 +388,11 @@ enum _RTL8192Usb_HW { #define EPROM_CMD_NORMAL 0 #define EPROM_CMD_LOAD 1 #define EPROM_CMD_PROGRAM 2 -#define EPROM_CS_SHIFT 3 -#define EPROM_CK_SHIFT 2 -#define EPROM_W_SHIFT 1 -#define EPROM_R_SHIFT 0 +#define EPROM_CS_BIT BIT(3) +#define EPROM_CK_BIT BIT(2) +#define EPROM_W_BIT BIT(1) +#define EPROM_R_BIT BIT(0) + MAC0 = 0x000, MAC1 = 0x001, MAC2 = 0x002, diff --git a/drivers/staging/rtl8192u/r8192U_wx.c b/drivers/staging/rtl8192u/r8192U_wx.c index f191f04404d8..3e2576347d29 100644 --- a/drivers/staging/rtl8192u/r8192U_wx.c +++ b/drivers/staging/rtl8192u/r8192U_wx.c @@ -235,7 +235,7 @@ static int r8192_wx_read_nicb(struct net_device *dev, down(&priv->wx_sem); get_user(addr,(u32 *)wrqu->data.pointer); - data1 = read_nic_byte(dev, addr); + read_nic_byte(dev, addr, &data1); wrqu->data.length = data1; up(&priv->wx_sem); diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c index f8ace12786e7..bb924ac97e47 100644 --- a/drivers/staging/rtl8192u/r819xU_firmware.c +++ b/drivers/staging/rtl8192u/r819xU_firmware.c @@ -168,7 +168,7 @@ bool CPUcheck_maincodeok_turnonCPU(struct net_device *dev) /* Check whether put code OK */ do { - CPU_status = read_nic_dword(dev, CPU_GEN); + read_nic_dword(dev, CPU_GEN, &CPU_status); if (CPU_status&CPU_GEN_PUT_CODE_OK) break; @@ -183,13 +183,13 @@ bool CPUcheck_maincodeok_turnonCPU(struct net_device *dev) } /* Turn On CPU */ - CPU_status = read_nic_dword(dev, CPU_GEN); + read_nic_dword(dev, CPU_GEN, &CPU_status); write_nic_byte(dev, CPU_GEN, (u8)((CPU_status|CPU_GEN_PWR_STB_CPU)&0xff)); mdelay(1000); /* Check whether CPU boot OK */ do { - CPU_status = read_nic_dword(dev, CPU_GEN); + read_nic_dword(dev, CPU_GEN, &CPU_status); if (CPU_status&CPU_GEN_BOOT_RDY) break; @@ -218,7 +218,7 @@ bool CPUcheck_firmware_ready(struct net_device *dev) /* Check Firmware Ready */ do { - CPU_status = read_nic_dword(dev, CPU_GEN); + read_nic_dword(dev, CPU_GEN, &CPU_status); if (CPU_status&CPU_GEN_FIRM_RDY) break; diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c index 54f4cba08cfa..60cba808c2fc 100644 --- a/drivers/staging/rtl8192u/r819xU_phy.c +++ b/drivers/staging/rtl8192u/r819xU_phy.c @@ -90,7 +90,7 @@ void rtl8192_setBBreg(struct net_device *dev, u32 dwRegAddr, u32 dwBitMask, u32 if(dwBitMask!= bMaskDWord) {//if not "double word" write - OriginalValue = read_nic_dword(dev, dwRegAddr); + read_nic_dword(dev, dwRegAddr, &OriginalValue); BitShift = rtl8192_CalculateBitShift(dwBitMask); NewValue = (((OriginalValue) & (~dwBitMask)) | (dwData << BitShift)); write_nic_dword(dev, dwRegAddr, NewValue); @@ -111,7 +111,7 @@ u32 rtl8192_QueryBBReg(struct net_device *dev, u32 dwRegAddr, u32 dwBitMask) { u32 Ret = 0, OriginalValue, BitShift; - OriginalValue = read_nic_dword(dev, dwRegAddr); + read_nic_dword(dev, dwRegAddr, &OriginalValue); BitShift = rtl8192_CalculateBitShift(dwBitMask); Ret =(OriginalValue & dwBitMask) >> BitShift; @@ -379,6 +379,7 @@ phy_FwRFSerialRead( u32 retValue = 0; u32 Data = 0; u8 time = 0; + u32 tmp; //DbgPrint("FW RF CTRL\n\r"); /* 2007/11/02 MH Firmware RF Write control. By Francis' suggestion, we can not execute the scheme in the initial step. Otherwise, RF-R/W will waste @@ -394,13 +395,15 @@ phy_FwRFSerialRead( // 5. Trigger Fw to operate the command. bit 31 Data |= 0x80000000; // 6. We can not execute read operation if bit 31 is 1. - while (read_nic_dword(dev, QPNR)&0x80000000) + read_nic_dword(dev, QPNR, &tmp); + while (tmp & 0x80000000) { // If FW can not finish RF-R/W for more than ?? times. We must reset FW. if (time++ < 100) { //DbgPrint("FW not finish RF-R Time=%d\n\r", time); udelay(10); + read_nic_dword(dev, QPNR, &tmp); } else break; @@ -408,18 +411,20 @@ phy_FwRFSerialRead( // 7. Execute read operation. write_nic_dword(dev, QPNR, Data); // 8. Check if firmawre send back RF content. - while (read_nic_dword(dev, QPNR)&0x80000000) + read_nic_dword(dev, QPNR, &tmp); + while (tmp & 0x80000000) { // If FW can not finish RF-R/W for more than ?? times. We must reset FW. if (time++ < 100) { //DbgPrint("FW not finish RF-W Time=%d\n\r", time); udelay(10); + read_nic_dword(dev, QPNR, &tmp); } else return (0); } - retValue = read_nic_dword(dev, RF_DATA); + read_nic_dword(dev, RF_DATA, &retValue); return (retValue); @@ -440,6 +445,7 @@ phy_FwRFSerialWrite( u32 Data ) { u8 time = 0; + u32 tmp; //DbgPrint("N FW RF CTRL RF-%d OF%02x DATA=%03x\n\r", eRFPath, Offset, Data); /* 2007/11/02 MH Firmware RF Write control. By Francis' suggestion, we can @@ -458,13 +464,15 @@ phy_FwRFSerialWrite( Data |= 0x80000000; // 6. Write operation. We can not write if bit 31 is 1. - while (read_nic_dword(dev, QPNR)&0x80000000) + read_nic_dword(dev, QPNR, &tmp); + while (tmp & 0x80000000) { // If FW can not finish RF-R/W for more than ?? times. We must reset FW. if (time++ < 100) { //DbgPrint("FW not finish RF-W Time=%d\n\r", time); udelay(10); + read_nic_dword(dev, QPNR, &tmp); } else break; @@ -719,7 +727,7 @@ u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock, RF9 case HW90_BLOCK_PHY0: case HW90_BLOCK_PHY1: write_nic_dword(dev, WriteAddr[CheckBlock], WriteData[i]); - dwRegRead = read_nic_dword(dev, WriteAddr[CheckBlock]); + read_nic_dword(dev, WriteAddr[CheckBlock], &dwRegRead); break; case HW90_BLOCK_RF: @@ -770,11 +778,11 @@ void rtl8192_BB_Config_ParaFile(struct net_device *dev) **************************************/ /*--set BB Global Reset--*/ - bRegValue = read_nic_byte(dev, BB_GLOBAL_RESET); + read_nic_byte(dev, BB_GLOBAL_RESET, &bRegValue); write_nic_byte(dev, BB_GLOBAL_RESET,(bRegValue|BB_GLOBAL_RESET_BIT)); mdelay(50); /*---set BB reset Active---*/ - dwRegValue = read_nic_dword(dev, CPU_GEN); + read_nic_dword(dev, CPU_GEN, &dwRegValue); write_nic_dword(dev, CPU_GEN, (dwRegValue&(~CPU_GEN_BB_RST))); /*----Ckeck FPGAPHY0 and PHY1 board is OK----*/ @@ -795,7 +803,7 @@ void rtl8192_BB_Config_ParaFile(struct net_device *dev) rtl8192_phyConfigBB(dev, BaseBand_Config_PHY_REG); /*----Set BB reset de-Active----*/ - dwRegValue = read_nic_dword(dev, CPU_GEN); + read_nic_dword(dev, CPU_GEN, &dwRegValue); write_nic_dword(dev, CPU_GEN, (dwRegValue|CPU_GEN_BB_RST)); /*----BB AGC table Initialization----*/ @@ -846,36 +854,32 @@ void rtl8192_BBConfig(struct net_device *dev) void rtl8192_phy_getTxPower(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); - priv->MCSTxPowerLevelOriginalOffset[0] = - read_nic_dword(dev, rTxAGC_Rate18_06); - priv->MCSTxPowerLevelOriginalOffset[1] = - read_nic_dword(dev, rTxAGC_Rate54_24); - priv->MCSTxPowerLevelOriginalOffset[2] = - read_nic_dword(dev, rTxAGC_Mcs03_Mcs00); - priv->MCSTxPowerLevelOriginalOffset[3] = - read_nic_dword(dev, rTxAGC_Mcs07_Mcs04); - priv->MCSTxPowerLevelOriginalOffset[4] = - read_nic_dword(dev, rTxAGC_Mcs11_Mcs08); - priv->MCSTxPowerLevelOriginalOffset[5] = - read_nic_dword(dev, rTxAGC_Mcs15_Mcs12); + u8 tmp; + read_nic_dword(dev, rTxAGC_Rate18_06, &priv->MCSTxPowerLevelOriginalOffset[0]); + read_nic_dword(dev, rTxAGC_Rate54_24, &priv->MCSTxPowerLevelOriginalOffset[1]); + read_nic_dword(dev, rTxAGC_Mcs03_Mcs00, &priv->MCSTxPowerLevelOriginalOffset[2]); + read_nic_dword(dev, rTxAGC_Mcs07_Mcs04, &priv->MCSTxPowerLevelOriginalOffset[3]); + read_nic_dword(dev, rTxAGC_Mcs11_Mcs08, &priv->MCSTxPowerLevelOriginalOffset[4]); + read_nic_dword(dev, rTxAGC_Mcs15_Mcs12, &priv->MCSTxPowerLevelOriginalOffset[5]); // read rx initial gain - priv->DefaultInitialGain[0] = read_nic_byte(dev, rOFDM0_XAAGCCore1); - priv->DefaultInitialGain[1] = read_nic_byte(dev, rOFDM0_XBAGCCore1); - priv->DefaultInitialGain[2] = read_nic_byte(dev, rOFDM0_XCAGCCore1); - priv->DefaultInitialGain[3] = read_nic_byte(dev, rOFDM0_XDAGCCore1); + read_nic_byte(dev, rOFDM0_XAAGCCore1, &priv->DefaultInitialGain[0]); + read_nic_byte(dev, rOFDM0_XBAGCCore1, &priv->DefaultInitialGain[1]); + read_nic_byte(dev, rOFDM0_XCAGCCore1, &priv->DefaultInitialGain[2]); + read_nic_byte(dev, rOFDM0_XDAGCCore1, &priv->DefaultInitialGain[3]); RT_TRACE(COMP_INIT, "Default initial gain (c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x) \n", priv->DefaultInitialGain[0], priv->DefaultInitialGain[1], priv->DefaultInitialGain[2], priv->DefaultInitialGain[3]); // read framesync - priv->framesync = read_nic_byte(dev, rOFDM0_RxDetector3); - priv->framesyncC34 = read_nic_byte(dev, rOFDM0_RxDetector2); + read_nic_byte(dev, rOFDM0_RxDetector3, &priv->framesync); + read_nic_byte(dev, rOFDM0_RxDetector2, &tmp); + priv->framesyncC34 = tmp; RT_TRACE(COMP_INIT, "Default framesync (0x%x) = 0x%x \n", rOFDM0_RxDetector3, priv->framesync); // read SIFS (save the value read fome MACPHY_REG.txt) - priv->SifsTime = read_nic_word(dev, SIFS); + read_nic_word(dev, SIFS, &priv->SifsTime); return; } @@ -1525,7 +1529,7 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev) } //<1>Set MAC register - regBwOpMode = read_nic_byte(dev, BW_OPMODE); + read_nic_byte(dev, BW_OPMODE, ®BwOpMode); switch (priv->CurrentChannelBW) { -- 2.39.5