From b54cf35a7f656c61dd695509e8cf8cc7e1dc3e53 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Jan-Simon=20M=C3=B6ller?= Date: Fri, 20 Jul 2012 16:49:06 +0800 Subject: [PATCH] LEDS: add BlinkM RGB LED driver, documentation and update MAINTAINERS MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Add driver for BlinkM device to drivers/leds/. Add entry to MAINTAINERS file. Add documentation in Documentation/leds/. A BlinkM is a RGB LED controlled through I2C. This driver implements an interface to the LED framework and another sysfs group to access the internal options of the BlinkM. rev6: Use module_i2c_driver(). rev5: Removed own workqueue in favor of events wq. rev4: Fixed comments by Bryan Wu. rev3: Fixed issues found by Jonathan Neuschäfer. (bryan.wu@canonical.com: remove 2 trailing whitespace) Signed-off-by: Jan-Simon Möller Signed-off-by: Bryan Wu --- Documentation/leds/leds-blinkm.txt | 80 +++ MAINTAINERS | 5 + drivers/leds/Kconfig | 8 + drivers/leds/Makefile | 1 + drivers/leds/leds-blinkm.c | 812 +++++++++++++++++++++++++++++ 5 files changed, 906 insertions(+) create mode 100644 Documentation/leds/leds-blinkm.txt create mode 100644 drivers/leds/leds-blinkm.c diff --git a/Documentation/leds/leds-blinkm.txt b/Documentation/leds/leds-blinkm.txt new file mode 100644 index 000000000000..9dd92f4cf4e1 --- /dev/null +++ b/Documentation/leds/leds-blinkm.txt @@ -0,0 +1,80 @@ +The leds-blinkm driver supports the devices of the BlinkM family. + +They are RGB-LED modules driven by a (AT)tiny microcontroller and +communicate through I2C. The default address of these modules is +0x09 but this can be changed through a command. By this you could +dasy-chain up to 127 BlinkMs on an I2C bus. + +The device accepts RGB and HSB color values through separate commands. +Also you can store blinking sequences as "scripts" in +the controller and run them. Also fading is an option. + +The interface this driver provides is 2-fold: + +a) LED class interface for use with triggers +############################################ + +The registration follows the scheme: +blinkm--- + +$ ls -h /sys/class/leds/blinkm-6-* +/sys/class/leds/blinkm-6-9-blue: +brightness device max_brightness power subsystem trigger uevent + +/sys/class/leds/blinkm-6-9-green: +brightness device max_brightness power subsystem trigger uevent + +/sys/class/leds/blinkm-6-9-red: +brightness device max_brightness power subsystem trigger uevent + +(same is /sys/bus/i2c/devices/6-0009/leds) + +We can control the colors separated into red, green and blue and +assign triggers on each color. + +E.g.: + +$ cat blinkm-6-9-blue/brightness +05 + +$ echo 200 > blinkm-6-9-blue/brightness +$ + +$ modprobe ledtrig-heartbeat +$ echo heartbeat > blinkm-6-9-green/trigger +$ + + +b) Sysfs group to control rgb, fade, hsb, scripts ... +##################################################### + +This extended interface is available as folder blinkm +in the sysfs folder of the I2C device. +E.g. below /sys/bus/i2c/devices/6-0009/blinkm + +$ ls -h /sys/bus/i2c/devices/6-0009/blinkm/ +blue green red test + +Currently supported is just setting red, green, blue +and a test sequence. + +E.g.: + +$ cat * +00 +00 +00 +#Write into test to start test sequence!# + +$ echo 1 > test +$ + +$ echo 255 > red +$ + + + +as of 6/2012 + +dl9pf gmx de + diff --git a/MAINTAINERS b/MAINTAINERS index fe643e7b9df6..4d8811af9edd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1518,6 +1518,11 @@ W: http://blackfin.uclinux.org/ S: Supported F: drivers/i2c/busses/i2c-bfin-twi.c +BLINKM RGB LED DRIVER +M: Jan-Simon Moeller +S: Maintained +F: drivers/leds/leds-blinkm.c + BLOCK LAYER M: Jens Axboe T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index f028f0348e83..f0aaf415316d 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -430,6 +430,14 @@ config LEDS_OT200 This option enables support for the LEDs on the Bachmann OT200. Say Y to enable LEDs on the Bachmann OT200. +config LEDS_BLINKM + tristate "LED support for the BlinkM I2C RGB LED" + depends on LEDS_CLASS + depends on I2C + help + This option enables support for the BlinkM RGB LED connected + through I2C. Say Y to enable support for the BlinkM LED. + config LEDS_TRIGGERS bool "LED Trigger support" depends on LEDS_CLASS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 5eebd7bce4be..d94d18f8a4be 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o obj-$(CONFIG_LEDS_RENESAS_TPU) += leds-renesas-tpu.o obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o obj-$(CONFIG_LEDS_LM3556) += leds-lm3556.o +obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o # LED SPI Drivers obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o diff --git a/drivers/leds/leds-blinkm.c b/drivers/leds/leds-blinkm.c new file mode 100644 index 000000000000..5a9df43e5302 --- /dev/null +++ b/drivers/leds/leds-blinkm.c @@ -0,0 +1,812 @@ +/* + * leds-blinkm.c + * (c) Jan-Simon Möller (dl9pf@gmx.de) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan - BlinkM is on 0x09 by default*/ +static const unsigned short normal_i2c[] = { 0x09, I2C_CLIENT_END }; + +static int blinkm_transfer_hw(struct i2c_client *client, int cmd); +static int blinkm_test_run(struct i2c_client *client); + +struct blinkm_led { + struct i2c_client *i2c_client; + struct led_classdev led_cdev; + int id; + atomic_t active; +}; + +struct blinkm_work { + struct blinkm_led *blinkm_led; + struct work_struct work; +}; + +#define cdev_to_blmled(c) container_of(c, struct blinkm_led, led_cdev) +#define work_to_blmwork(c) container_of(c, struct blinkm_work, work) + +struct blinkm_data { + struct i2c_client *i2c_client; + struct mutex update_lock; + /* used for led class interface */ + struct blinkm_led blinkm_leds[3]; + /* used for "blinkm" sysfs interface */ + u8 red; /* color red */ + u8 green; /* color green */ + u8 blue; /* color blue */ + /* next values to use for transfer */ + u8 next_red; /* color red */ + u8 next_green; /* color green */ + u8 next_blue; /* color blue */ + /* internal use */ + u8 args[7]; /* set of args for transmission */ + u8 i2c_addr; /* i2c addr */ + u8 fw_ver; /* firmware version */ + /* used, but not from userspace */ + u8 hue; /* HSB hue */ + u8 saturation; /* HSB saturation */ + u8 brightness; /* HSB brightness */ + u8 next_hue; /* HSB hue */ + u8 next_saturation; /* HSB saturation */ + u8 next_brightness; /* HSB brightness */ + /* currently unused / todo */ + u8 fade_speed; /* fade speed 1 - 255 */ + s8 time_adjust; /* time adjust -128 - 127 */ + u8 fade:1; /* fade on = 1, off = 0 */ + u8 rand:1; /* rand fade mode on = 1 */ + u8 script_id; /* script ID */ + u8 script_repeats; /* repeats of script */ + u8 script_startline; /* line to start */ +}; + +/* Colors */ +#define RED 0 +#define GREEN 1 +#define BLUE 2 + +/* mapping command names to cmd chars - see datasheet */ +#define BLM_GO_RGB 0 +#define BLM_FADE_RGB 1 +#define BLM_FADE_HSB 2 +#define BLM_FADE_RAND_RGB 3 +#define BLM_FADE_RAND_HSB 4 +#define BLM_PLAY_SCRIPT 5 +#define BLM_STOP_SCRIPT 6 +#define BLM_SET_FADE_SPEED 7 +#define BLM_SET_TIME_ADJ 8 +#define BLM_GET_CUR_RGB 9 +#define BLM_WRITE_SCRIPT_LINE 10 +#define BLM_READ_SCRIPT_LINE 11 +#define BLM_SET_SCRIPT_LR 12 /* Length & Repeats */ +#define BLM_SET_ADDR 13 +#define BLM_GET_ADDR 14 +#define BLM_GET_FW_VER 15 +#define BLM_SET_STARTUP_PARAM 16 + +/* BlinkM Commands + * as extracted out of the datasheet: + * + * cmdchar = command (ascii) + * cmdbyte = command in hex + * nr_args = number of arguments (to send) + * nr_ret = number of return values (to read) + * dir = direction (0 = read, 1 = write, 2 = both) + * + */ +static const struct { + char cmdchar; + u8 cmdbyte; + u8 nr_args; + u8 nr_ret; + u8 dir:2; +} blinkm_cmds[17] = { + /* cmdchar, cmdbyte, nr_args, nr_ret, dir */ + { 'n', 0x6e, 3, 0, 1}, + { 'c', 0x63, 3, 0, 1}, + { 'h', 0x68, 3, 0, 1}, + { 'C', 0x43, 3, 0, 1}, + { 'H', 0x48, 3, 0, 1}, + { 'p', 0x70, 3, 0, 1}, + { 'o', 0x6f, 0, 0, 1}, + { 'f', 0x66, 1, 0, 1}, + { 't', 0x74, 1, 0, 1}, + { 'g', 0x67, 0, 3, 0}, + { 'W', 0x57, 7, 0, 1}, + { 'R', 0x52, 2, 5, 2}, + { 'L', 0x4c, 3, 0, 1}, + { 'A', 0x41, 4, 0, 1}, + { 'a', 0x61, 0, 1, 0}, + { 'Z', 0x5a, 0, 1, 0}, + { 'B', 0x42, 5, 0, 1}, +}; + +static ssize_t show_color_common(struct device *dev, char *buf, int color) +{ + struct i2c_client *client; + struct blinkm_data *data; + int ret; + + client = to_i2c_client(dev); + data = i2c_get_clientdata(client); + + ret = blinkm_transfer_hw(client, BLM_GET_CUR_RGB); + if (ret < 0) + return ret; + switch (color) { + case RED: + return scnprintf(buf, PAGE_SIZE, "%02X\n", data->red); + break; + case GREEN: + return scnprintf(buf, PAGE_SIZE, "%02X\n", data->green); + break; + case BLUE: + return scnprintf(buf, PAGE_SIZE, "%02X\n", data->blue); + break; + default: + return -EINVAL; + } + return -EINVAL; +} + +static int store_color_common(struct device *dev, const char *buf, int color) +{ + struct i2c_client *client; + struct blinkm_data *data; + int ret; + u8 value; + + client = to_i2c_client(dev); + data = i2c_get_clientdata(client); + + ret = kstrtou8(buf, 10, &value); + if (ret < 0) { + dev_err(dev, "BlinkM: value too large!\n"); + return ret; + } + + switch (color) { + case RED: + data->next_red = value; + break; + case GREEN: + data->next_green = value; + break; + case BLUE: + data->next_blue = value; + break; + default: + return -EINVAL; + } + + dev_dbg(dev, "next_red = %d, next_green = %d, next_blue = %d\n", + data->next_red, data->next_green, data->next_blue); + + /* if mode ... */ + ret = blinkm_transfer_hw(client, BLM_GO_RGB); + if (ret < 0) { + dev_err(dev, "BlinkM: can't set RGB\n"); + return ret; + } + return 0; +} + +static ssize_t show_red(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return show_color_common(dev, buf, RED); +} + +static ssize_t store_red(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret; + + ret = store_color_common(dev, buf, RED); + if (ret < 0) + return ret; + return count; +} + +static DEVICE_ATTR(red, S_IRUGO | S_IWUSR, show_red, store_red); + +static ssize_t show_green(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return show_color_common(dev, buf, GREEN); +} + +static ssize_t store_green(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + + int ret; + + ret = store_color_common(dev, buf, GREEN); + if (ret < 0) + return ret; + return count; +} + +static DEVICE_ATTR(green, S_IRUGO | S_IWUSR, show_green, store_green); + +static ssize_t show_blue(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return show_color_common(dev, buf, BLUE); +} + +static ssize_t store_blue(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret; + + ret = store_color_common(dev, buf, BLUE); + if (ret < 0) + return ret; + return count; +} + +static DEVICE_ATTR(blue, S_IRUGO | S_IWUSR, show_blue, store_blue); + +static ssize_t show_test(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return scnprintf(buf, PAGE_SIZE, + "#Write into test to start test sequence!#\n"); +} + +static ssize_t store_test(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + + struct i2c_client *client; + int ret; + client = to_i2c_client(dev); + + /*test */ + ret = blinkm_test_run(client); + if (ret < 0) + return ret; + + return count; +} + +static DEVICE_ATTR(test, S_IRUGO | S_IWUSR, show_test, store_test); + +/* TODO: HSB, fade, timeadj, script ... */ + +static struct attribute *blinkm_attrs[] = { + &dev_attr_red.attr, + &dev_attr_green.attr, + &dev_attr_blue.attr, + &dev_attr_test.attr, + NULL, +}; + +static struct attribute_group blinkm_group = { + .name = "blinkm", + .attrs = blinkm_attrs, +}; + +static int blinkm_write(struct i2c_client *client, int cmd, u8 *arg) +{ + int result; + int i; + int arglen = blinkm_cmds[cmd].nr_args; + /* write out cmd to blinkm - always / default step */ + result = i2c_smbus_write_byte(client, blinkm_cmds[cmd].cmdbyte); + if (result < 0) + return result; + /* no args to write out */ + if (arglen == 0) + return 0; + + for (i = 0; i < arglen; i++) { + /* repeat for arglen */ + result = i2c_smbus_write_byte(client, arg[i]); + if (result < 0) + return result; + } + return 0; +} + +static int blinkm_read(struct i2c_client *client, int cmd, u8 *arg) +{ + int result; + int i; + int retlen = blinkm_cmds[cmd].nr_ret; + for (i = 0; i < retlen; i++) { + /* repeat for retlen */ + result = i2c_smbus_read_byte(client); + if (result < 0) + return result; + arg[i] = result; + } + + return 0; +} + +static int blinkm_transfer_hw(struct i2c_client *client, int cmd) +{ + /* the protocol is simple but non-standard: + * e.g. cmd 'g' (= 0x67) for "get device address" + * - which defaults to 0x09 - would be the sequence: + * a) write 0x67 to the device (byte write) + * b) read the value (0x09) back right after (byte read) + * + * Watch out for "unfinished" sequences (i.e. not enough reads + * or writes after a command. It will make the blinkM misbehave. + * Sequence is key here. + */ + + /* args / return are in private data struct */ + struct blinkm_data *data = i2c_get_clientdata(client); + + /* We start hardware transfers which are not to be + * mixed with other commands. Aquire a lock now. */ + if (mutex_lock_interruptible(&data->update_lock) < 0) + return -EAGAIN; + + /* switch cmd - usually write before reads */ + switch (cmd) { + case BLM_FADE_RAND_RGB: + case BLM_GO_RGB: + case BLM_FADE_RGB: + data->args[0] = data->next_red; + data->args[1] = data->next_green; + data->args[2] = data->next_blue; + blinkm_write(client, cmd, data->args); + data->red = data->args[0]; + data->green = data->args[1]; + data->blue = data->args[2]; + break; + case BLM_FADE_HSB: + case BLM_FADE_RAND_HSB: + data->args[0] = data->next_hue; + data->args[1] = data->next_saturation; + data->args[2] = data->next_brightness; + blinkm_write(client, cmd, data->args); + data->hue = data->next_hue; + data->saturation = data->next_saturation; + data->brightness = data->next_brightness; + break; + case BLM_PLAY_SCRIPT: + data->args[0] = data->script_id; + data->args[1] = data->script_repeats; + data->args[2] = data->script_startline; + blinkm_write(client, cmd, data->args); + break; + case BLM_STOP_SCRIPT: + blinkm_write(client, cmd, NULL); + break; + case BLM_GET_CUR_RGB: + data->args[0] = data->red; + data->args[1] = data->green; + data->args[2] = data->blue; + blinkm_write(client, cmd, NULL); + blinkm_read(client, cmd, data->args); + data->red = data->args[0]; + data->green = data->args[1]; + data->blue = data->args[2]; + break; + case BLM_GET_ADDR: + data->args[0] = data->i2c_addr; + blinkm_write(client, cmd, NULL); + blinkm_read(client, cmd, data->args); + data->i2c_addr = data->args[0]; + break; + case BLM_SET_TIME_ADJ: + case BLM_SET_FADE_SPEED: + case BLM_READ_SCRIPT_LINE: + case BLM_WRITE_SCRIPT_LINE: + case BLM_SET_SCRIPT_LR: + case BLM_SET_ADDR: + case BLM_GET_FW_VER: + case BLM_SET_STARTUP_PARAM: + dev_err(&client->dev, + "BlinkM: cmd %d not implemented yet.\n", cmd); + break; + default: + dev_err(&client->dev, "BlinkM: unknown command %d\n", cmd); + mutex_unlock(&data->update_lock); + return -EINVAL; + } /* end switch(cmd) */ + + /* transfers done, unlock */ + mutex_unlock(&data->update_lock); + return 0; +} + +static void led_work(struct work_struct *work) +{ + int ret; + struct blinkm_led *led; + struct blinkm_data *data ; + struct blinkm_work *blm_work = work_to_blmwork(work); + + led = blm_work->blinkm_led; + data = i2c_get_clientdata(led->i2c_client); + ret = blinkm_transfer_hw(led->i2c_client, BLM_GO_RGB); + atomic_dec(&led->active); + dev_dbg(&led->i2c_client->dev, + "# DONE # next_red = %d, next_green = %d," + " next_blue = %d, active = %d\n", + data->next_red, data->next_green, + data->next_blue, atomic_read(&led->active)); + kfree(blm_work); +} + +static int blinkm_led_common_set(struct led_classdev *led_cdev, + enum led_brightness value, int color) +{ + /* led_brightness is 0, 127 or 255 - we just use it here as-is */ + struct blinkm_led *led = cdev_to_blmled(led_cdev); + struct blinkm_data *data = i2c_get_clientdata(led->i2c_client); + struct blinkm_work *bl_work = kzalloc(sizeof(struct blinkm_work), + GFP_ATOMIC); + + switch (color) { + case RED: + /* bail out if there's no change */ + if (data->next_red == (u8) value) + return 0; + /* we assume a quite fast sequence here ([off]->on->off) + * think of network led trigger - we cannot blink that fast, so + * in case we already have a off->on->off transition queued up, + * we refuse to queue up more. + * Revisit: fast-changing brightness. */ + if (atomic_read(&led->active) > 1) + return 0; + data->next_red = (u8) value; + break; + case GREEN: + /* bail out if there's no change */ + if (data->next_green == (u8) value) + return 0; + /* we assume a quite fast sequence here ([off]->on->off) + * Revisit: fast-changing brightness. */ + if (atomic_read(&led->active) > 1) + return 0; + data->next_green = (u8) value; + break; + case BLUE: + /* bail out if there's no change */ + if (data->next_blue == (u8) value) + return 0; + /* we assume a quite fast sequence here ([off]->on->off) + * Revisit: fast-changing brightness. */ + if (atomic_read(&led->active) > 1) + return 0; + data->next_blue = (u8) value; + break; + + default: + dev_err(&led->i2c_client->dev, "BlinkM: unknown color.\n"); + return -EINVAL; + } + + atomic_inc(&led->active); + dev_dbg(&led->i2c_client->dev, + "#TO_SCHED# next_red = %d, next_green = %d," + " next_blue = %d, active = %d\n", + data->next_red, data->next_green, + data->next_blue, atomic_read(&led->active)); + + /* a fresh work _item_ for each change */ + bl_work->blinkm_led = led; + INIT_WORK(&bl_work->work, led_work); + /* queue work in own queue for easy sync on exit*/ + schedule_work(&bl_work->work); + + return 0; +} + +static void blinkm_led_red_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + blinkm_led_common_set(led_cdev, value, RED); +} + +static void blinkm_led_green_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + blinkm_led_common_set(led_cdev, value, GREEN); +} + +static void blinkm_led_blue_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + blinkm_led_common_set(led_cdev, value, BLUE); +} + +static void blinkm_init_hw(struct i2c_client *client) +{ + int ret; + ret = blinkm_transfer_hw(client, BLM_STOP_SCRIPT); + ret = blinkm_transfer_hw(client, BLM_GO_RGB); +} + +static int blinkm_test_run(struct i2c_client *client) +{ + int ret; + struct blinkm_data *data = i2c_get_clientdata(client); + + data->next_red = 0x01; + data->next_green = 0x05; + data->next_blue = 0x10; + ret = blinkm_transfer_hw(client, BLM_GO_RGB); + if (ret < 0) + return ret; + msleep(2000); + + data->next_red = 0x25; + data->next_green = 0x10; + data->next_blue = 0x31; + ret = blinkm_transfer_hw(client, BLM_FADE_RGB); + if (ret < 0) + return ret; + msleep(2000); + + data->next_hue = 0x50; + data->next_saturation = 0x10; + data->next_brightness = 0x20; + ret = blinkm_transfer_hw(client, BLM_FADE_HSB); + if (ret < 0) + return ret; + msleep(2000); + + return 0; +} + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int blinkm_detect(struct i2c_client *client, struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + int ret; + int count = 99; + u8 tmpargs[7]; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA + | I2C_FUNC_SMBUS_WORD_DATA + | I2C_FUNC_SMBUS_WRITE_BYTE)) + return -ENODEV; + + /* Now, we do the remaining detection. Simple for now. */ + /* We might need more guards to protect other i2c slaves */ + + /* make sure the blinkM is balanced (read/writes) */ + while (count > 0) { + ret = blinkm_write(client, BLM_GET_ADDR, NULL); + usleep_range(5000, 10000); + ret = blinkm_read(client, BLM_GET_ADDR, tmpargs); + usleep_range(5000, 10000); + if (tmpargs[0] == 0x09) + count = 0; + count--; + } + + /* Step 1: Read BlinkM address back - cmd_char 'a' */ + ret = blinkm_write(client, BLM_GET_ADDR, NULL); + if (ret < 0) + return -ENODEV; + usleep_range(20000, 30000); /* allow a small delay */ + ret = blinkm_read(client, BLM_GET_ADDR, tmpargs); + if (ret < 0) + return -ENODEV; + + if (tmpargs[0] != 0x09) { + dev_err(&client->dev, "enodev DEV ADDR = 0x%02X\n", tmpargs[0]); + return -ENODEV; + } + + strlcpy(info->type, "blinkm", I2C_NAME_SIZE); + return 0; +} + +static int __devinit blinkm_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct blinkm_data *data; + struct blinkm_led *led[3]; + int err, i; + char blinkm_led_name[28]; + + data = devm_kzalloc(&client->dev, + sizeof(struct blinkm_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + data->i2c_addr = 0x09; + data->i2c_addr = 0x08; + /* i2c addr - use fake addr of 0x08 initially (real is 0x09) */ + data->fw_ver = 0xfe; + /* firmware version - use fake until we read real value + * (currently broken - BlinkM confused!) */ + data->script_id = 0x01; + data->i2c_client = client; + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* Register sysfs hooks */ + err = sysfs_create_group(&client->dev.kobj, &blinkm_group); + if (err < 0) { + dev_err(&client->dev, "couldn't register sysfs group\n"); + goto exit; + } + + for (i = 0; i < 3; i++) { + /* RED = 0, GREEN = 1, BLUE = 2 */ + led[i] = &data->blinkm_leds[i]; + led[i]->i2c_client = client; + led[i]->id = i; + led[i]->led_cdev.max_brightness = 255; + led[i]->led_cdev.flags = LED_CORE_SUSPENDRESUME; + atomic_set(&led[i]->active, 0); + switch (i) { + case RED: + snprintf(blinkm_led_name, sizeof(blinkm_led_name), + "blinkm-%d-%d-red", + client->adapter->nr, + client->addr); + led[i]->led_cdev.name = blinkm_led_name; + led[i]->led_cdev.brightness_set = blinkm_led_red_set; + err = led_classdev_register(&client->dev, + &led[i]->led_cdev); + if (err < 0) { + dev_err(&client->dev, + "couldn't register LED %s\n", + led[i]->led_cdev.name); + goto failred; + } + break; + case GREEN: + snprintf(blinkm_led_name, sizeof(blinkm_led_name), + "blinkm-%d-%d-green", + client->adapter->nr, + client->addr); + led[i]->led_cdev.name = blinkm_led_name; + led[i]->led_cdev.brightness_set = blinkm_led_green_set; + err = led_classdev_register(&client->dev, + &led[i]->led_cdev); + if (err < 0) { + dev_err(&client->dev, + "couldn't register LED %s\n", + led[i]->led_cdev.name); + goto failgreen; + } + break; + case BLUE: + snprintf(blinkm_led_name, sizeof(blinkm_led_name), + "blinkm-%d-%d-blue", + client->adapter->nr, + client->addr); + led[i]->led_cdev.name = blinkm_led_name; + led[i]->led_cdev.brightness_set = blinkm_led_blue_set; + err = led_classdev_register(&client->dev, + &led[i]->led_cdev); + if (err < 0) { + dev_err(&client->dev, + "couldn't register LED %s\n", + led[i]->led_cdev.name); + goto failblue; + } + break; + } /* end switch */ + } /* end for */ + + /* Initialize the blinkm */ + blinkm_init_hw(client); + + return 0; + +failblue: + led_classdev_unregister(&led[GREEN]->led_cdev); + +failgreen: + led_classdev_unregister(&led[RED]->led_cdev); + +failred: + sysfs_remove_group(&client->dev.kobj, &blinkm_group); +exit: + return err; +} + +static int __devexit blinkm_remove(struct i2c_client *client) +{ + struct blinkm_data *data = i2c_get_clientdata(client); + int ret = 0; + int i; + + /* make sure no workqueue entries are pending */ + for (i = 0; i < 3; i++) { + flush_scheduled_work(); + led_classdev_unregister(&data->blinkm_leds[i].led_cdev); + } + + /* reset rgb */ + data->next_red = 0x00; + data->next_green = 0x00; + data->next_blue = 0x00; + ret = blinkm_transfer_hw(client, BLM_FADE_RGB); + if (ret < 0) + dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n"); + + /* reset hsb */ + data->next_hue = 0x00; + data->next_saturation = 0x00; + data->next_brightness = 0x00; + ret = blinkm_transfer_hw(client, BLM_FADE_HSB); + if (ret < 0) + dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n"); + + /* red fade to off */ + data->next_red = 0xff; + ret = blinkm_transfer_hw(client, BLM_GO_RGB); + if (ret < 0) + dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n"); + + /* off */ + data->next_red = 0x00; + ret = blinkm_transfer_hw(client, BLM_FADE_RGB); + if (ret < 0) + dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n"); + + sysfs_remove_group(&client->dev.kobj, &blinkm_group); + return 0; +} + +static const struct i2c_device_id blinkm_id[] = { + {"blinkm", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, blinkm_id); + + /* This is the driver that will be inserted */ +static struct i2c_driver blinkm_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "blinkm", + }, + .probe = blinkm_probe, + .remove = __devexit_p(blinkm_remove), + .id_table = blinkm_id, + .detect = blinkm_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(blinkm_driver); + +MODULE_AUTHOR("Jan-Simon Moeller "); +MODULE_DESCRIPTION("BlinkM RGB LED driver"); +MODULE_LICENSE("GPL"); + -- 2.39.5