From b55b1290375c9b83d654ebaff2c804ec812f3290 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Mon, 12 Aug 2013 09:22:57 +0800 Subject: [PATCH] usb: chipidea: udc: fix misuse of REGS_SHARED and PULLUP_ON_VBUS flags CI_HDRC_REGS_SHARED stands for the controller registers is shared with other USB drivers, if all USB drivers are at chipidea/, it doesn't needed to be set. CI_HDRC_PULLUP_ON_VBUS stands for pullup dp when the vbus is on. This flag doesn't need to be set if the vbus is always on for gadget since dp has always pulled up after the gadget has initialized. So, the current code seems to misuse this two flags. - When the gadget initializes, the controller doesn't need to run if it depends on vbus (CI_HDRC_PULLUP_ON_VBUS), it does not relate to shared register. - When the gadget starts (load one gadget module), the controller can run if vbus is on (CI_HDRC_PULLUP_ON_VBUS), it also does not relate to shared register. Tested-by: Marek Vasut Signed-off-by: Peter Chen Signed-off-by: Alexander Shishkin --- drivers/usb/chipidea/udc.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index c70ce3891d35..45abf4d46a71 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1637,8 +1637,7 @@ static int ci_udc_start(struct usb_gadget *gadget, pm_runtime_get_sync(&ci->gadget.dev); if (ci->platdata->flags & CI_HDRC_PULLUP_ON_VBUS) { if (ci->vbus_active) { - if (ci->platdata->flags & CI_HDRC_REGS_SHARED) - hw_device_reset(ci, USBMODE_CM_DC); + hw_device_reset(ci, USBMODE_CM_DC); } else { pm_runtime_put_sync(&ci->gadget.dev); goto done; @@ -1801,7 +1800,7 @@ static int udc_start(struct ci_hdrc *ci) } } - if (!(ci->platdata->flags & CI_HDRC_REGS_SHARED)) { + if (!(ci->platdata->flags & CI_HDRC_PULLUP_ON_VBUS)) { retval = hw_device_reset(ci, USBMODE_CM_DC); if (retval) goto put_transceiver; -- 2.39.5