From b61e79967a6f35043aa838ff36d9970658a0af3d Mon Sep 17 00:00:00 2001 From: Vandana Kannan Date: Thu, 31 Mar 2016 23:15:54 +0530 Subject: [PATCH] drm/i915: BXT DDI PHY sequence BUN According to the BSpec update, bit 7 of PORT_CL1CM_DW0 register needs to be checked to ensure that the register is in accessible state. Also, based on a BSpec update, changing the timeout value to check iphypwrgood, from 10ms to wait for up to 100us. v2: [Ville] use wait_for_us instead of the atomic call. v3: [Jani/Imre] read register only once Signed-off-by: Vandana Kannan Reported-by: Philippe Lecluse Cc: Deak, Imre Cc: Nikula, Jani Acked-by: Jani Nikula Reviewed-by: Imre Deak Signed-off-by: Imre Deak Link: http://patchwork.freedesktop.org/patch/msgid/1459446354-19012-1-git-send-email-vandana.kannan@intel.com --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_ddi.c | 13 +++++++++++-- 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index c839ce952a50..6df3c59fb192 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1324,6 +1324,7 @@ enum skl_disp_power_wells { #define _PORT_CL1CM_DW0_A 0x162000 #define _PORT_CL1CM_DW0_BC 0x6C000 #define PHY_POWER_GOOD (1 << 16) +#define PHY_RESERVED (1 << 7) #define BXT_PORT_CL1CM_DW0(phy) _BXT_PHY((phy), _PORT_CL1CM_DW0_BC, \ _PORT_CL1CM_DW0_A) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 1e083853c70d..3d62b601188f 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1732,9 +1732,18 @@ static void broxton_phy_init(struct drm_i915_private *dev_priv, val |= GT_DISPLAY_POWER_ON(phy); I915_WRITE(BXT_P_CR_GT_DISP_PWRON, val); - /* Considering 10ms timeout until BSpec is updated */ - if (wait_for(I915_READ(BXT_PORT_CL1CM_DW0(phy)) & PHY_POWER_GOOD, 10)) + /* + * The PHY registers start out inaccessible and respond to reads with + * all 1s. Eventually they become accessible as they power up, then + * the reserved bit will give the default 0. Poll on the reserved bit + * becoming 0 to find when the PHY is accessible. + * HW team confirmed that the time to reach phypowergood status is + * anywhere between 50 us and 100us. + */ + if (wait_for_us(((I915_READ(BXT_PORT_CL1CM_DW0(phy)) & + (PHY_RESERVED | PHY_POWER_GOOD)) == PHY_POWER_GOOD), 100)) { DRM_ERROR("timeout during PHY%d power on\n", phy); + } for (port = (phy == DPIO_PHY0 ? PORT_B : PORT_A); port <= (phy == DPIO_PHY0 ? PORT_C : PORT_A); port++) { -- 2.39.5