From bb426fc96316b20876acc3289c5115f00918c2bb Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 19 Oct 2012 17:42:10 +0300 Subject: [PATCH] OMAPDSS: HDMI: split power_on/off to two parts There's currently just one power-on function for HDMI, which enables the IP and the video output. When reading EDID or detecting if a monitor is connected, we don't need the video output. Enabling the video output for these operations is not a big problem in itself, but the quick enable/disable cycles caused by the operations seem to cause sync lost errors from time to time. Also, this makes it possible to read the EDID before the full video path has been set up. This patch splits the hdmi_power_on into two parts, hdmi_power_on_core and hdmi_power_on_full. The "full" version does what hdmi_power_on does currently, and hdmi_power_on_core only enables the core IP. Similar changes are made for power_off. Note that these don't allow the HDMI IP to be first enabled, and later enable the video output, but the HDMI IP will first need to be powered off before calling the full version. So this is rather limited implementation, but it fills the needs for reading EDID. Signed-off-by: Tomi Valkeinen Cc: Ricardo Neri --- drivers/video/omap2/dss/hdmi.c | 75 +++++++++++++++++++++------------- 1 file changed, 46 insertions(+), 29 deletions(-) diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c index 54931f14c099..1226044e5508 100644 --- a/drivers/video/omap2/dss/hdmi.c +++ b/drivers/video/omap2/dss/hdmi.c @@ -500,12 +500,9 @@ static void hdmi_compute_pll(struct omap_dss_device *dssdev, int phy, DSSDBG("range = %d sd = %d\n", pi->dcofreq, pi->regsd); } -static int hdmi_power_on(struct omap_dss_device *dssdev) +static int hdmi_power_on_core(struct omap_dss_device *dssdev) { int r; - struct omap_video_timings *p; - struct omap_overlay_manager *mgr = dssdev->output->manager; - unsigned long phy; gpio_set_value(hdmi.ct_cp_hpd_gpio, 1); gpio_set_value(hdmi.ls_oe_gpio, 1); @@ -521,6 +518,46 @@ static int hdmi_power_on(struct omap_dss_device *dssdev) if (r) goto err_runtime_get; + /* Make selection of HDMI in DSS */ + dss_select_hdmi_venc_clk_source(DSS_HDMI_M_PCLK); + + /* Select the dispc clock source as PRCM clock, to ensure that it is not + * DSI PLL source as the clock selected by DSI PLL might not be + * sufficient for the resolution selected / that can be changed + * dynamically by user. This can be moved to single location , say + * Boardfile. + */ + dss_select_dispc_clk_source(dssdev->clocks.dispc.dispc_fclk_src); + + return 0; + +err_runtime_get: + regulator_disable(hdmi.vdda_hdmi_dac_reg); +err_vdac_enable: + gpio_set_value(hdmi.ct_cp_hpd_gpio, 0); + gpio_set_value(hdmi.ls_oe_gpio, 0); + return r; +} + +static void hdmi_power_off_core(struct omap_dss_device *dssdev) +{ + hdmi_runtime_put(); + regulator_disable(hdmi.vdda_hdmi_dac_reg); + gpio_set_value(hdmi.ct_cp_hpd_gpio, 0); + gpio_set_value(hdmi.ls_oe_gpio, 0); +} + +static int hdmi_power_on_full(struct omap_dss_device *dssdev) +{ + int r; + struct omap_video_timings *p; + struct omap_overlay_manager *mgr = dssdev->output->manager; + unsigned long phy; + + r = hdmi_power_on_core(dssdev); + if (r) + return r; + dss_mgr_disable(mgr); p = &hdmi.ip_data.cfg.timings; @@ -548,17 +585,6 @@ static int hdmi_power_on(struct omap_dss_device *dssdev) hdmi.ip_data.ops->video_configure(&hdmi.ip_data); - /* Make selection of HDMI in DSS */ - dss_select_hdmi_venc_clk_source(DSS_HDMI_M_PCLK); - - /* Select the dispc clock source as PRCM clock, to ensure that it is not - * DSI PLL source as the clock selected by DSI PLL might not be - * sufficient for the resolution selected / that can be changed - * dynamically by user. This can be moved to single location , say - * Boardfile. - */ - dss_select_dispc_clk_source(dssdev->clocks.dispc.dispc_fclk_src); - /* bypass TV gamma table */ dispc_enable_gamma_table(0); @@ -582,16 +608,11 @@ err_vid_enable: err_phy_enable: hdmi.ip_data.ops->pll_disable(&hdmi.ip_data); err_pll_enable: - hdmi_runtime_put(); -err_runtime_get: - regulator_disable(hdmi.vdda_hdmi_dac_reg); -err_vdac_enable: - gpio_set_value(hdmi.ct_cp_hpd_gpio, 0); - gpio_set_value(hdmi.ls_oe_gpio, 0); + hdmi_power_off_core(dssdev); return -EIO; } -static void hdmi_power_off(struct omap_dss_device *dssdev) +static void hdmi_power_off_full(struct omap_dss_device *dssdev) { struct omap_overlay_manager *mgr = dssdev->output->manager; @@ -600,12 +621,8 @@ static void hdmi_power_off(struct omap_dss_device *dssdev) hdmi.ip_data.ops->video_disable(&hdmi.ip_data); hdmi.ip_data.ops->phy_disable(&hdmi.ip_data); hdmi.ip_data.ops->pll_disable(&hdmi.ip_data); - hdmi_runtime_put(); - regulator_disable(hdmi.vdda_hdmi_dac_reg); - - gpio_set_value(hdmi.ct_cp_hpd_gpio, 0); - gpio_set_value(hdmi.ls_oe_gpio, 0); + hdmi_power_off_core(dssdev); } int omapdss_hdmi_display_check_timing(struct omap_dss_device *dssdev, @@ -713,7 +730,7 @@ int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev) goto err0; } - r = hdmi_power_on(dssdev); + r = hdmi_power_on_full(dssdev); if (r) { DSSERR("failed to power on device\n"); goto err1; @@ -735,7 +752,7 @@ void omapdss_hdmi_display_disable(struct omap_dss_device *dssdev) mutex_lock(&hdmi.lock); - hdmi_power_off(dssdev); + hdmi_power_off_full(dssdev); omap_dss_stop_device(dssdev); -- 2.39.5