From bcc84140a62c04f522eacceb793e6eef92965c84 Mon Sep 17 00:00:00 2001 From: Kalesh AP Date: Wed, 5 Aug 2015 03:27:48 -0400 Subject: [PATCH] be2net: enable IFACE filters only after creating RXQs HW issues were observed on Lancer adapters if IFACE filters (flags, mac addrs etc) are enabled *before* creating RXQs. This patch changes the driver design by enabling filters in be_open() -- instead of be_setup() -- after RXQs are created and buffers posted. Two new wrapper functions, be_enable_if_filters() and be_disable_if_filters() are introduced to enable/disable IFACE filters in be_open()/be_close() respectively. In be_setup() the IFACE is now created only with the RSS flag. Signed-off-by: Kalesh AP Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.h | 5 + drivers/net/ethernet/emulex/benet/be_main.c | 127 ++++++++++++-------- 2 files changed, 85 insertions(+), 47 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h index 2716e6f30d9a..00e3a6b6b822 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.h +++ b/drivers/net/ethernet/emulex/benet/be_cmds.h @@ -620,6 +620,11 @@ enum be_if_flags { BE_IF_FLAGS_VLAN_PROMISCUOUS |\ BE_IF_FLAGS_MCAST_PROMISCUOUS) +#define BE_IF_EN_FLAGS (BE_IF_FLAGS_BROADCAST | BE_IF_FLAGS_PASS_L3L4_ERRORS |\ + BE_IF_FLAGS_MULTICAST | BE_IF_FLAGS_UNTAGGED) + +#define BE_IF_ALL_FILT_FLAGS (BE_IF_EN_FLAGS | BE_IF_FLAGS_ALL_PROMISCUOUS) + /* An RX interface is an object with one or more MAC addresses and * filtering capabilities. */ struct be_cmd_req_if_create { diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 6f642426308c..7730f21b6071 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -273,6 +273,10 @@ static int be_mac_addr_set(struct net_device *netdev, void *p) if (ether_addr_equal(addr->sa_data, netdev->dev_addr)) return 0; + /* if device is not running, copy MAC to netdev->dev_addr */ + if (!netif_running(netdev)) + goto done; + /* The PMAC_ADD cmd may fail if the VF doesn't have FILTMGMT * privilege or if PF did not provision the new MAC address. * On BE3, this cmd will always fail if the VF doesn't have the @@ -307,9 +311,9 @@ static int be_mac_addr_set(struct net_device *netdev, void *p) status = -EPERM; goto err; } - - memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); - dev_info(dev, "MAC address changed to %pM\n", mac); +done: + ether_addr_copy(netdev->dev_addr, addr->sa_data); + dev_info(dev, "MAC address changed to %pM\n", addr->sa_data); return 0; err: dev_warn(dev, "MAC address change to %pM failed\n", addr->sa_data); @@ -3361,6 +3365,33 @@ static void be_rx_qs_destroy(struct be_adapter *adapter) } } +static void be_disable_if_filters(struct be_adapter *adapter) +{ + be_cmd_pmac_del(adapter, adapter->if_handle, + adapter->pmac_id[0], 0); + + be_clear_uc_list(adapter); + + /* The IFACE flags are enabled in the open path and cleared + * in the close path. When a VF gets detached from the host and + * assigned to a VM the following happens: + * - VF's IFACE flags get cleared in the detach path + * - IFACE create is issued by the VF in the attach path + * Due to a bug in the BE3/Skyhawk-R FW + * (Lancer FW doesn't have the bug), the IFACE capability flags + * specified along with the IFACE create cmd issued by a VF are not + * honoured by FW. As a consequence, if a *new* driver + * (that enables/disables IFACE flags in open/close) + * is loaded in the host and an *old* driver is * used by a VM/VF, + * the IFACE gets created *without* the needed flags. + * To avoid this, disable RX-filter flags only for Lancer. + */ + if (lancer_chip(adapter)) { + be_cmd_rx_filter(adapter, BE_IF_ALL_FILT_FLAGS, OFF); + adapter->if_flags &= ~BE_IF_ALL_FILT_FLAGS; + } +} + static int be_close(struct net_device *netdev) { struct be_adapter *adapter = netdev_priv(netdev); @@ -3373,6 +3404,8 @@ static int be_close(struct net_device *netdev) if (!(adapter->flags & BE_FLAGS_SETUP_DONE)) return 0; + be_disable_if_filters(adapter); + be_roce_dev_close(adapter); if (adapter->flags & BE_FLAGS_NAPI_ENABLED) { @@ -3392,7 +3425,6 @@ static int be_close(struct net_device *netdev) be_tx_compl_clean(adapter); be_rx_qs_destroy(adapter); - be_clear_uc_list(adapter); for_all_evt_queues(adapter, eqo, i) { if (msix_enabled(adapter)) @@ -3477,6 +3509,31 @@ static int be_rx_qs_create(struct be_adapter *adapter) return 0; } +static int be_enable_if_filters(struct be_adapter *adapter) +{ + int status; + + status = be_cmd_rx_filter(adapter, BE_IF_EN_FLAGS, ON); + if (status) + return status; + + /* For BE3 VFs, the PF programs the initial MAC address */ + if (!(BEx_chip(adapter) && be_virtfn(adapter))) { + status = be_cmd_pmac_add(adapter, adapter->netdev->dev_addr, + adapter->if_handle, + &adapter->pmac_id[0], 0); + if (status) + return status; + } + + if (adapter->vlans_added) + be_vid_config(adapter); + + be_set_rx_mode(adapter->netdev); + + return 0; +} + static int be_open(struct net_device *netdev) { struct be_adapter *adapter = netdev_priv(netdev); @@ -3490,6 +3547,10 @@ static int be_open(struct net_device *netdev) if (status) goto err; + status = be_enable_if_filters(adapter); + if (status) + goto err; + status = be_irq_register(adapter); if (status) goto err; @@ -3686,16 +3747,6 @@ static void be_cancel_err_detection(struct be_adapter *adapter) } } -static void be_mac_clear(struct be_adapter *adapter) -{ - if (adapter->pmac_id) { - be_cmd_pmac_del(adapter, adapter->if_handle, - adapter->pmac_id[0], 0); - kfree(adapter->pmac_id); - adapter->pmac_id = NULL; - } -} - #ifdef CONFIG_BE2NET_VXLAN static void be_disable_vxlan_offloads(struct be_adapter *adapter) { @@ -3770,8 +3821,8 @@ static int be_clear(struct be_adapter *adapter) #ifdef CONFIG_BE2NET_VXLAN be_disable_vxlan_offloads(adapter); #endif - /* delete the primary mac along with the uc-mac list */ - be_mac_clear(adapter); + kfree(adapter->pmac_id); + adapter->pmac_id = NULL; be_cmd_if_destroy(adapter, adapter->if_handle, 0); @@ -3782,25 +3833,11 @@ static int be_clear(struct be_adapter *adapter) return 0; } -static int be_if_create(struct be_adapter *adapter, u32 *if_handle, - u32 cap_flags, u32 vf) -{ - u32 en_flags; - - en_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST | - BE_IF_FLAGS_MULTICAST | BE_IF_FLAGS_PASS_L3L4_ERRORS | - BE_IF_FLAGS_RSS | BE_IF_FLAGS_DEFQ_RSS; - - en_flags &= cap_flags; - - return be_cmd_if_create(adapter, cap_flags, en_flags, if_handle, vf); -} - static int be_vfs_if_create(struct be_adapter *adapter) { struct be_resources res = {0}; + u32 cap_flags, en_flags, vf; struct be_vf_cfg *vf_cfg; - u32 cap_flags, vf; int status; /* If a FW profile exists, then cap_flags are updated */ @@ -3821,8 +3858,12 @@ static int be_vfs_if_create(struct be_adapter *adapter) } } - status = be_if_create(adapter, &vf_cfg->if_handle, - cap_flags, vf + 1); + en_flags = cap_flags & (BE_IF_FLAGS_UNTAGGED | + BE_IF_FLAGS_BROADCAST | + BE_IF_FLAGS_MULTICAST | + BE_IF_FLAGS_PASS_L3L4_ERRORS); + status = be_cmd_if_create(adapter, cap_flags, en_flags, + &vf_cfg->if_handle, vf + 1); if (status) return status; } @@ -4194,15 +4235,8 @@ static int be_mac_setup(struct be_adapter *adapter) memcpy(adapter->netdev->dev_addr, mac, ETH_ALEN); memcpy(adapter->netdev->perm_addr, mac, ETH_ALEN); - } else { - /* Maybe the HW was reset; dev_addr must be re-programmed */ - memcpy(mac, adapter->netdev->dev_addr, ETH_ALEN); } - /* For BE3-R VFs, the PF programs the initial MAC address */ - if (!(BEx_chip(adapter) && be_virtfn(adapter))) - be_cmd_pmac_add(adapter, mac, adapter->if_handle, - &adapter->pmac_id[0], 0); return 0; } @@ -4342,6 +4376,7 @@ static int be_func_init(struct be_adapter *adapter) static int be_setup(struct be_adapter *adapter) { struct device *dev = &adapter->pdev->dev; + u32 en_flags; int status; status = be_func_init(adapter); @@ -4364,8 +4399,11 @@ static int be_setup(struct be_adapter *adapter) if (status) goto err; - status = be_if_create(adapter, &adapter->if_handle, - be_if_cap_flags(adapter), 0); + /* will enable all the needed filter flags in be_open() */ + en_flags = BE_IF_FLAGS_RSS | BE_IF_FLAGS_DEFQ_RSS; + en_flags = en_flags & be_if_cap_flags(adapter); + status = be_cmd_if_create(adapter, be_if_cap_flags(adapter), en_flags, + &adapter->if_handle, 0); if (status) goto err; @@ -4391,11 +4429,6 @@ static int be_setup(struct be_adapter *adapter) dev_err(dev, "Please upgrade firmware to version >= 4.0\n"); } - if (adapter->vlans_added) - be_vid_config(adapter); - - be_set_rx_mode(adapter->netdev); - status = be_cmd_set_flow_control(adapter, adapter->tx_fc, adapter->rx_fc); if (status) -- 2.39.5