From bd52e2d274d369182f38d9ddaf8ce910c2a7332f Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Thu, 20 Jun 2013 16:42:31 +0200 Subject: [PATCH] ARM: dts: omap3-igep0020: add mux conf for GPIO LEDs The IGEPv2 has a number of GPIO LED connected to OMAP pins. Configure these pins as output GPIO. Signed-off-by: Javier Martinez Canillas Tested-by: Enric Balletbo i Serra Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap3-igep0020.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index e8c48284587c..51c084eeb7bd 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -16,7 +16,10 @@ compatible = "isee,omap3-igep0020", "ti,omap3"; leds { + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; compatible = "gpio-leds"; + boot { label = "omap3:green:boot"; gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; @@ -54,6 +57,14 @@ }; }; +&leds_pins { + pinctrl-single,pins = < + 0x5c4 (PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */ + 0x5c6 (PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */ + 0x5c8 (PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */ + >; +}; + &i2c3 { clock-frequency = <100000>; -- 2.39.5