From bef1f40261c8bc5ad2ca70a5a1760b0eb79b6812 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Tue, 12 Dec 2006 20:04:19 +0100 Subject: [PATCH] kconfig: Standardize "depends" -> "depends on" in Kconfig files Standardize the miniscule percentage of occurrences of "depends" in Kconfig files to "depends on", and update kconfig-language.txt to reflect that. Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk --- Documentation/kbuild/kconfig-language.txt | 8 +++---- arch/arm/mach-pxa/Kconfig | 16 ++++++------- arch/arm/plat-omap/Kconfig | 2 +- arch/powerpc/platforms/4xx/Kconfig | 2 +- arch/powerpc/platforms/embedded6xx/Kconfig | 2 +- arch/ppc/Kconfig | 4 ++-- arch/ppc/platforms/4xx/Kconfig | 2 +- arch/v850/Kconfig | 28 +++++++++++----------- drivers/char/Kconfig | 2 +- drivers/ide/Kconfig | 2 +- drivers/leds/Kconfig | 22 ++++++++--------- drivers/serial/Kconfig | 4 ++-- fs/Kconfig | 2 +- sound/aoa/fabrics/Kconfig | 2 +- 14 files changed, 49 insertions(+), 49 deletions(-) diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt index 125093c3ef76..536d5bfbdb8d 100644 --- a/Documentation/kbuild/kconfig-language.txt +++ b/Documentation/kbuild/kconfig-language.txt @@ -29,7 +29,7 @@ them. A single configuration option is defined like this: config MODVERSIONS bool "Set version information on all module symbols" - depends MODULES + depends on MODULES help Usually, modules have to be recompiled whenever you switch to a new kernel. ... @@ -163,7 +163,7 @@ The position of a menu entry in the tree is determined in two ways. First it can be specified explicitly: menu "Network device support" - depends NET + depends on NET config NETDEVICES ... @@ -188,10 +188,10 @@ config MODULES config MODVERSIONS bool "Set version information on all module symbols" - depends MODULES + depends on MODULES comment "module support disabled" - depends !MODULES + depends on !MODULES MODVERSIONS directly depends on MODULES, this means it's only visible if MODULES is different from 'n'. The comment on the other hand is always diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 9e3d0bdcba07..5c0a10041cd1 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -75,28 +75,28 @@ endmenu config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" - depends PXA_SHARPSL_25x + depends on PXA_SHARPSL_25x select SHARP_LOCOMO select PXA_SSP config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" - depends PXA_SHARPSL_25x + depends on PXA_SHARPSL_25x select PXA_SHARP_C7xx config MACH_SHEPHERD bool "Enable Sharp SL-C750 (Shepherd) Support" - depends PXA_SHARPSL_25x + depends on PXA_SHARPSL_25x select PXA_SHARP_C7xx config MACH_HUSKY bool "Enable Sharp SL-C760 (Husky) Support" - depends PXA_SHARPSL_25x + depends on PXA_SHARPSL_25x select PXA_SHARP_C7xx config MACH_AKITA bool "Enable Sharp SL-1000 (Akita) Support" - depends PXA_SHARPSL_27x + depends on PXA_SHARPSL_27x select PXA_SHARP_Cxx00 select MACH_SPITZ select I2C @@ -104,17 +104,17 @@ config MACH_AKITA config MACH_SPITZ bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" - depends PXA_SHARPSL_27x + depends on PXA_SHARPSL_27x select PXA_SHARP_Cxx00 config MACH_BORZOI bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" - depends PXA_SHARPSL_27x + depends on PXA_SHARPSL_27x select PXA_SHARP_Cxx00 config MACH_TOSA bool "Enable Sharp SL-6000x (Tosa) Support" - depends PXA_SHARPSL_25x + depends on PXA_SHARPSL_25x config PXA25x bool diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index ec752e16d618..f2dc363de66b 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -113,7 +113,7 @@ endchoice config OMAP_SERIAL_WAKE bool "Enable wake-up events for serial ports" - depends OMAP_MUX + depends on OMAP_MUX default y help Select this option if you want to have your system wake up diff --git a/arch/powerpc/platforms/4xx/Kconfig b/arch/powerpc/platforms/4xx/Kconfig index ed39d6a3d22a..2f2a13ed7667 100644 --- a/arch/powerpc/platforms/4xx/Kconfig +++ b/arch/powerpc/platforms/4xx/Kconfig @@ -179,7 +179,7 @@ config BIOS_FIXUP # OAK doesn't exist but wanted to keep this around for any future 403GCX boards config 403GCX bool - depends OAK + depends on OAK default y config 405EP diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index ddbe398fbd48..b3c2ce4cb7a8 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -35,7 +35,7 @@ config HDPU Select HDPU if configuring a Sky Computers Compute Blade. config HDPU_FEATURES - depends HDPU + depends on HDPU tristate "HDPU-Features" help Select to enable HDPU enhanced features. diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 692b5ba53209..8eb82efe05a1 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -624,7 +624,7 @@ config HDPU Select HDPU if configuring a Sky Computers Compute Blade. config HDPU_FEATURES - depends HDPU + depends on HDPU tristate "HDPU-Features" help Select to enable HDPU enhanced features. @@ -735,7 +735,7 @@ config LITE5200 config LITE5200B bool "Freescale LITE5200B" - depends LITE5200 + depends on LITE5200 help Support for the LITE5200B dev board for the MPC5200 from Freescale. This is the new board with 2 PCI slots. diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index 293bd489e7d9..6980de420e92 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -189,7 +189,7 @@ config BIOS_FIXUP # OAK doesn't exist but wanted to keep this around for any future 403GCX boards config 403GCX bool - depends OAK + depends on OAK default y config 405EP diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig index bcf825875d17..f0d4d72e560f 100644 --- a/arch/v850/Kconfig +++ b/arch/v850/Kconfig @@ -105,17 +105,17 @@ menu "Processor type and features" # currently support config V850E_MA1 bool - depends RTE_CB_MA1 + depends on RTE_CB_MA1 default y # Similarly for the RTE-V850E/NB85E-CB - V850E/TEG config V850E_TEG bool - depends RTE_CB_NB85E + depends on RTE_CB_NB85E default y # ... and the RTE-V850E/ME2-CB - V850E/ME2 config V850E_ME2 bool - depends RTE_CB_ME2 + depends on RTE_CB_ME2 default y @@ -123,7 +123,7 @@ menu "Processor type and features" config V850E2_SIM85E2 bool - depends V850E2_SIM85E2C || V850E2_SIM85E2S + depends on V850E2_SIM85E2C || V850E2_SIM85E2S default y @@ -132,7 +132,7 @@ menu "Processor type and features" # V850E2 processors config V850E2 bool - depends V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA + depends on V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA default y @@ -141,7 +141,7 @@ menu "Processor type and features" # Boards in the RTE-x-CB series config RTE_CB bool - depends RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2 + depends on RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2 default y config RTE_CB_MULTI @@ -149,28 +149,28 @@ menu "Processor type and features" # RTE_CB_NB85E can either have multi ROM support or not, but # other platforms (currently only RTE_CB_MA1) require it. prompt "Multi monitor ROM support" if RTE_CB_NB85E - depends RTE_CB_MA1 || RTE_CB_NB85E + depends on RTE_CB_MA1 || RTE_CB_NB85E default y config RTE_CB_MULTI_DBTRAP bool "Pass illegal insn trap / dbtrap to kernel" - depends RTE_CB_MULTI + depends on RTE_CB_MULTI default n config RTE_CB_MA1_KSRAM bool "Kernel in SRAM (limits size of kernel)" - depends RTE_CB_MA1 && RTE_CB_MULTI + depends on RTE_CB_MA1 && RTE_CB_MULTI default n config RTE_MB_A_PCI bool "Mother-A PCI support" - depends RTE_CB + depends on RTE_CB default y # The GBUS is used to talk to the RTE-MOTHER-A board config RTE_GBUS_INT bool - depends RTE_MB_A_PCI + depends on RTE_MB_A_PCI default y # The only PCI bus we support is on the RTE-MOTHER-A board @@ -209,7 +209,7 @@ menu "Processor type and features" config ROM_KERNEL bool "Kernel in ROM" - depends V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2 + depends on V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2 # Some platforms pre-zero memory, in which case the kernel doesn't need to config ZERO_BSS @@ -225,10 +225,10 @@ menu "Processor type and features" config V850E_HIGHRES_TIMER bool "High resolution timer support" - depends V850E_TIMER_D + depends on V850E_TIMER_D config TIME_BOOTUP bool "Time bootup" - depends V850E_HIGHRES_TIMER + depends on V850E_HIGHRES_TIMER config RESET_GUARD bool "Reset Guard" diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index b10f4d8fdc7f..0a3aee29e067 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -867,7 +867,7 @@ config SONYPI config TANBAC_TB0219 tristate "TANBAC TB0219 base board support" - depends TANBAC_TB022X + depends on TANBAC_TB022X select GPIO_VR41XX source "drivers/char/agp/Kconfig" diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index e23bc0d62159..3f828052f8d2 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -796,7 +796,7 @@ endchoice config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ int "Maximum transfer size (KB) per request (up to 128)" default "128" - depends BLK_DEV_IDE_AU1XXX + depends on BLK_DEV_IDE_AU1XXX config IDE_ARM def_bool ARM && (ARCH_A5K || ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK) diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 176142c61492..7399ba791116 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -12,7 +12,7 @@ config NEW_LEDS config LEDS_CLASS tristate "LED Class Support" - depends NEW_LEDS + depends on NEW_LEDS help This option enables the led sysfs class in /sys/class/leds. You'll need this to do anything useful with LEDs. If unsure, say N. @@ -21,28 +21,28 @@ comment "LED drivers" config LEDS_CORGI tristate "LED Support for the Sharp SL-C7x0 series" - depends LEDS_CLASS && PXA_SHARP_C7xx + depends on LEDS_CLASS && PXA_SHARP_C7xx help This option enables support for the LEDs on Sharp Zaurus SL-C7x0 series (C700, C750, C760, C860). config LEDS_LOCOMO tristate "LED Support for Locomo device" - depends LEDS_CLASS && SHARP_LOCOMO + depends on LEDS_CLASS && SHARP_LOCOMO help This option enables support for the LEDs on Sharp Locomo. Zaurus models SL-5500 and SL-5600. config LEDS_SPITZ tristate "LED Support for the Sharp SL-Cxx00 series" - depends LEDS_CLASS && PXA_SHARP_Cxx00 + depends on LEDS_CLASS && PXA_SHARP_Cxx00 help This option enables support for the LEDs on Sharp Zaurus SL-Cxx00 series (C1000, C3000, C3100). config LEDS_IXP4XX tristate "LED Support for GPIO connected LEDs on IXP4XX processors" - depends LEDS_CLASS && ARCH_IXP4XX + depends on LEDS_CLASS && ARCH_IXP4XX help This option enables support for the LEDs connected to GPIO outputs of the Intel IXP4XX processors. To be useful the @@ -51,7 +51,7 @@ config LEDS_IXP4XX config LEDS_TOSA tristate "LED Support for the Sharp SL-6000 series" - depends LEDS_CLASS && PXA_SHARPSL + depends on LEDS_CLASS && PXA_SHARPSL help This option enables support for the LEDs on Sharp Zaurus SL-6000 series. @@ -65,7 +65,7 @@ config LEDS_S3C24XX config LEDS_AMS_DELTA tristate "LED Support for the Amstrad Delta (E3)" - depends LEDS_CLASS && MACH_AMS_DELTA + depends on LEDS_CLASS && MACH_AMS_DELTA help This option enables support for the LEDs on Amstrad Delta (E3). @@ -86,7 +86,7 @@ comment "LED Triggers" config LEDS_TRIGGERS bool "LED Trigger support" - depends NEW_LEDS + depends on NEW_LEDS help This option enables trigger support for the leds class. These triggers allow kernel events to drive the LEDs and can @@ -94,21 +94,21 @@ config LEDS_TRIGGERS config LEDS_TRIGGER_TIMER tristate "LED Timer Trigger" - depends LEDS_TRIGGERS + depends on LEDS_TRIGGERS help This allows LEDs to be controlled by a programmable timer via sysfs. If unsure, say Y. config LEDS_TRIGGER_IDE_DISK bool "LED IDE Disk Trigger" - depends LEDS_TRIGGERS && BLK_DEV_IDEDISK + depends on LEDS_TRIGGERS && BLK_DEV_IDEDISK help This allows LEDs to be controlled by IDE disk activity. If unsure, say Y. config LEDS_TRIGGER_HEARTBEAT tristate "LED Heartbeat Trigger" - depends LEDS_TRIGGERS + depends on LEDS_TRIGGERS help This allows LEDs to be controlled by a CPU load average. The flash frequency is a hyperbolic function of the 1-minute diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 0b36dd5cdac2..2978c09860ee 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -663,7 +663,7 @@ config V850E_UART config V850E_UARTB bool - depends V850E_UART && V850E_ME2 + depends on V850E_UART && V850E_ME2 default y config V850E_UART_CONSOLE @@ -909,7 +909,7 @@ config SERIAL_M32R_PLDSIO config SERIAL_TXX9 bool "TMPTX39XX/49XX SIO support" - depends HAS_TXX9_SERIAL + depends on HAS_TXX9_SERIAL select SERIAL_CORE default y diff --git a/fs/Kconfig b/fs/Kconfig index 0f8dfd5daca4..276ff3baaafe 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -1002,7 +1002,7 @@ config TMPFS_POSIX_ACL config HUGETLBFS bool "HugeTLB file system support" - depends X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN + depends on X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN help hugetlbfs is a filesystem backing for HugeTLB pages, based on ramfs. For architectures that support it, say Y here and read diff --git a/sound/aoa/fabrics/Kconfig b/sound/aoa/fabrics/Kconfig index c3bc7705c86a..50d7021ff677 100644 --- a/sound/aoa/fabrics/Kconfig +++ b/sound/aoa/fabrics/Kconfig @@ -1,6 +1,6 @@ config SND_AOA_FABRIC_LAYOUT tristate "layout-id fabric" - depends SND_AOA + depends on SND_AOA select SND_AOA_SOUNDBUS select SND_AOA_SOUNDBUS_I2S ---help--- -- 2.39.5