From c07ad5e868d1ecd82f2b75ef83eec3b904259002 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Thu, 26 Jul 2012 11:34:10 -0500 Subject: [PATCH] SCSI: hpsa: Use LUN reset instead of target reset commit 21e89afd325849eb38adccf382df16cc895911f9 upstream. It turns out Smart Array logical drives do not support target reset and when the target reset fails, the logical drive will be taken off line. Symptoms look like this: hpsa 0000:03:00.0: Abort request on C1:B0:T0:L0 hpsa 0000:03:00.0: resetting device 1:0:0:0 hpsa 0000:03:00.0: cp ffff880037c56000 is reported invalid (probably means target device no longer present) hpsa 0000:03:00.0: resetting device failed. sd 1:0:0:0: Device offlined - not ready after error recovery sd 1:0:0:0: rejecting I/O to offline device EXT3-fs error (device sdb1): read_block_bitmap: LUN reset is supported though, and is what we should be using. Target reset is also disruptive in shared SAS situations, for example, an external MSA1210m which does support target reset attached to Smart Arrays in multiple hosts -- a target reset from one host is disruptive to other hosts as all LUNs on the target will be reset and will abort all outstanding i/os back to all the attached hosts. So we should use LUN reset, not target reset. Tested this with Smart Array logical drives and with tape drives. Not sure how this bug survived since 2009, except it must be very rare for a Smart Array to require more than 30s to complete a request. Signed-off-by: Stephen M. Cameron Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman --- drivers/scsi/hpsa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index a3f856e994dc..1e33d39a722e 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -2893,7 +2893,7 @@ static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, c->Request.Timeout = 0; /* Don't time out */ memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB)); c->Request.CDB[0] = cmd; - c->Request.CDB[1] = 0x03; /* Reset target above */ + c->Request.CDB[1] = HPSA_RESET_TYPE_LUN; /* If bytes 4-7 are zero, it means reset the */ /* LunID device */ c->Request.CDB[4] = 0x00; -- 2.39.2