From c26f40daf4e32f970b8337a88b65a8d00332ae6f Mon Sep 17 00:00:00 2001 From: Raanan Avargil Date: Tue, 22 Dec 2015 15:35:03 +0200 Subject: [PATCH] e1000e: Set HW FIFO minimum pointer gap for non-gig speeds Based on feedback from HW team, the configured value of the internal PHY HW FIFO pointer gap was incorrect for non-gig speeds. This patch provides the correct configuration. Signed-off-by: Raanan Avargil Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 786d2148dd67..e7ccf5ffa835 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1479,6 +1479,18 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) hw->phy.ops.release(hw); if (ret_val) return ret_val; + } else { + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1e_wphy_locked(hw, + PHY_REG(776, 20), + 0xC023); + hw->phy.ops.release(hw); + if (ret_val) + return ret_val; + } } } -- 2.39.5