From c808ab9c82b20227a8b7659c5c8b75290047523c Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Mon, 21 May 2012 09:47:12 +0530 Subject: [PATCH] OMAPDSS: Apply VENC timings even if panel is disabled The VENC interfaces uses it's venc_set_timing() function to take in a new set of timings. If the panel is disabled, it does not disable and re-enable the interface. Currently, the manager timings are applied in venc_power_on(), these are not called by set_timings if the panel is disabled. When checking overlay and manager data, the DSS driver uses the last applied manager timings, and not the timings held by omap_dss_device struct. Hence, there is a need to apply the new manager timings even if the panel is disabled. Apply the manager timings if the VENC panel is disabled. This is similar to the commit below which fixed the same issue for HDMI/DPI interfaces: fcc36619901064a76e15a545ea36d38ba0e54192 Signed-off-by: Archit Taneja Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/venc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c index 09be43d02adf..2b8973931ff4 100644 --- a/drivers/video/omap2/dss/venc.c +++ b/drivers/video/omap2/dss/venc.c @@ -645,6 +645,8 @@ static void venc_set_timings(struct omap_dss_device *dssdev, /* turn the venc off and on to get new timings to use */ venc_panel_disable(dssdev); venc_panel_enable(dssdev); + } else { + dss_mgr_set_timings(dssdev->manager, timings); } } -- 2.39.5